Sinks
Results: 24
Ada Compliant Classroom Sinks
ADA Compliant Classroom Sinks are accessible sinks for use in a classroom environment. The sinks are available with the faucet on the left ledge with bubbler on the right ledge or vice versa; the faucet on the rear ledge with the bubbler on the left or right ledge; or both the faucet and bubbler on the right or left ledge. Drain is located in the center unless otherwise specified. The sinks are made of seamless 18 gauge type 304 stainless steel. Interior and top surfaces polished to a satin fini
Ada Compliant Wall Hung Lavatory (Model Hcl-23520-T)
The ADA Compliant Wall Hung Lavatory, model HCL-23520-T, is an accessible sink for use in public restrooms and classrooms that includes a J1174KS faucet and J115FS drain. Drain locations are centered unless otherwise specified. This model is available with rear mount concealed overflow feature. The sink is made of seamless 18 gauge type 304 stainless steel. All interior and top surfaces are polished to a satin finish. Sink is undercoated with a smooth, sound-deadening material. The sink is insta
Ada Stainless Steel Double Basins Sink (Model Pse-2020D)
The ADA Stainless Steel Double Basins Sink, model PSE–2020D, is a portable accessible sink designed for use by individuals who use wheelchairs. This portable accessible sink is equipped with two basins, each of which has a single lever faucet for each. The unit has a two 5-gallon tanks for fresh water and two 8-gallon tanks for waste water. An adjustable water heater allows the water temperature to be adjusted up to 145 degrees. It has six safety casters so it can be moved easily on firm flat su
Ada Stainless Steel Sink (Model Pse-2020)
The ADA Stainless Steel Sink, model PSE–2020, is a portable accessible sink designed for use by individuals who use wheelchairs. This single-compartment sink features a single handle for the faucet, and it provides hot and cold running water. The PSE–2020 has a 5-gallon tank for fresh water and a 7-gallon tank for waste water. It has a 20 AMPS Preset water heater, and it rolls on four safety casters. OPTIONS: Motion sensor and water filtration. DIMENSIONS: Cabinet (WxDxH): 34 x 18.5 x 31.75 inch
Adapting A Conventional Drop-In Lavatory For Wheelchair Access
DO IT YOURSELF ENTRY --- PURPOSE: To provide access to a bathroom sink for wheelchair users. This illustrated article demonstrates how to modify the cabinet of a conventional lavatory to provide knee room for wheelchair users. Based on guidelines developed by the Center for Universal Design at North Carolina State University. Raising the counter height above the conventional 32 inches by one to two inches, installing the shallowest possible sink with the drain toward the rear of the bowl, and sl
Barrier Free Accessible Vanity Systems
The Barrier Free Accessible Vanity Systems are modular, wall mounted units designed for wheelchair clearance in the lavatory. Eight series of models are available in a variety of lengths and configurations from a single bowl vanity 18 inches in length to multiple bowl units up to 144 inches in length. Each series features standard stainless steel towel dispensers, waste doors, soap dispensers, and a variety of faucets and fittings.
Commercial Double Bowl Kitchen Sink (Model 22129)
The Commercial Double Bowl Kitchen Sink, model 22129, is an accessible sink designed for use by individuals who use wheelchairs. Each bowl has a recessed drain opening located at the rear to allow more space underneath for a wheelchair user. Made of stainless steel with a polished satin finish, the sink has four fixture mounting holes and an undercoating that deadens sound and inhibits condensation. Mounting hardware is included. DIMENSIONS (HxDxW): Each bowl is 5.5 x 16 x 14 inches; overall cou
Drain Fitting (Model Lkad18)
Drain Fitting, model LKAD18, is an offset draining fitting designed for use under wheelchair-accessible sinks. Made of chrome-plated brass, it has an offset tailpiece that allows wheelchairs to fit under the sink and a chrome-plated steel perforated grid strainer. DIMENSIONS: Drain opening is 3.5 inches in diameter; the strainer is 3 inches in diameter; top diameter is 4.5 inches. The tailpiece is offset up to 12.75 inches.
Drain Fitting (Model Lkad35)
The Drain Fitting, model LKAD35, is an offset drain fitting designed for use in wheelchair-accessible bathrooms and kitchens. This fitting has a stainless steel body and strainer basket, with a chrome-plated brass tailpiece that is offset to allow wheelchairs to fit under the sink. The drainer has a flex stem and rubber stopper. DIMENSIONS: Drain opening is 3.5 inches in diameter. The top diameter is 4.5 inches. The tailpiece is offset 12.75 inches.
Kohler Countertops
Kohler Countertops are accessible vanities designed for use by people with disabilities. Countertops are available in 22 models, and are constructed either of vitreous china or Kohler cast iron. DIMENSIONS: Faucet drillings are 4, 8, or 12 inches; lengths range from 18 to 37 1/8 inches and widths range from 14 to 21.75 inches; basin depths range from 4.5 to 7 inches; minimum rim height installed is 34 inches. COLOR: A choice of colors is available.
Magic Basin
The Magic Basin is a an accessible sink with a hands-free electronic faucet designed for use by individuals with fine motor or upper extremity disabilities. Sensors in the basin's tap fittings detect the position of hands in the basin and control the water flow and temperature accordingly. In the factory setting, designed for use in public areas, placing hands in the middle of the basin activates the faucet and produces a warm water flow. The faucet is deactivated by removing hands from the wate
Marsh Handicap Furniture
Marsh Handicap Furniture includes kitchen and bathroom cabinets, desks, and bookcases designed to be accessible to wheelchair users. Toe kicks beneath cabinet floors are higher and deeper to allow for passage for wheelchair
users. Hinges open 180 degrees for barrier free access. Cabinet heights are customizable. Furniture is available in many styles and finishes. DIMENSIONS (HxD): Toe kicks are 8.5 x 6 inches.
Pullout Sink
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation to use a sink in a small apartment bathroom for users of wheelchairs. This adaptation uses a small RV sink, flexible pressure hose and a set of drawer runners, to be able to bring the sink out from the wall. An RV sink is shallower than a typical sink and would need to be much higher than a lap. The RV sink has a 2-inch diameter drain. The 2-inch elbow needed for under the sink may be difficult to find, but may be found
Sink Access Stairs
CUSTOM ADAPTATION PURPOSE: To enable a teenage girl with short stature to independently access a bathroom sink. A three-step ladder was made of stainless steel tubing. Bent into a D shape, the side rails of the ladder act as handrails for the user. Stair treads for the ladder were made of waterproof plywood coated with polyurethane and painted with non-slip tread deck paint. Crutch caps were fitted to the ends of the legs. TITLE: Bathroom Access. JOURNAL: TAD Journal. REF: Volume 27, Number 3,
Sink Modifications
DO IT YOURSELF - PURPOSE: To make a bathroom and sink more accessible to seniors and others with arthritis, mobility disabilities, and other physical disabilities. This introduction to a chapter entitled "Bathroom & Washing Up" suggests a variety of modifications to the existing fixture. Included are supporting the sink with brackets or legs, rather than a vanity and insulating pipes to prevent injury; adding a counter with open access at seated height for a wheelchair user and install small
Supreme Modules Adjustable Counters
Supreme Modules Adjustable Counters are accessible counters designed for use by individuals with mobility disabilities. The patented motorized lifting mechanism enables the stovetop or sink to be lowered up to six inches for wheelchair access.The plumbing, electrical system and lifting mechanism are built in to the unit which repaces existing counters. The counter supports up to 250 pounds and can be raised or lowered as needed using the push button on the front of the unit or with the included
Toddler Ada Stainless Steel Portable Sink (Model Pse-2020I)
The Toddler ADA Stainless Steel Portable Sink, model PSE–2020I, is a portable accessible sink designed for use by toddlers and children who use wheelchairs. This accessible sink is specifically designed for use in schools and other environments with small children. It is equipped with a single stainless steel basin with a single lever faucet, and it provides hot and cold running water. The unit features a 3-gallon tank for fresh water, a 4-gallon tank for waste water, and a 20 AMPS preset water
Wall Hung Cabinet (Model Wh18) & Wall Hung Slant Cabinet (Model Wh60S)
Wheelchair accessible lavatory cabinet. Wall hung, open under sink for access. Slanted cabinet design protects legs from pipes. Cabinet and doors are 5/8 inch particle board. Interior and exterior of cabinet faced with vinyl. Concealed hinges. Doors have cam locks and keys. Countertops are 3/4 inch particle board construction and are available with laminate or Corian. Backsplashes, endsplashes, and finished ends to be provided as ordered. Accessories: Towel dispenser and waste disposal doors set
Wash Basin (Model 6465)
The Wash Basin is a portable sink designed for washing or soaking away from a bathtub. The basin is rectangular. DIMENSIONS (WxLxH): 9 1/2 x 12 1/2 x 4 inches. CAPACITY: 7 quarts.
Wash Basin Electric Bracket (Model R4928000)
The Wash Basin Electric Bracket, model R4928000, is a bracket to create a height adjustable bathroom sink. It has an electric motor with remote control, and is designed for mounting on a horizontal track. DIMENSIONS: When the bracket is mounted at the recommended height of 470 millimeters, the wash basin's height can be adjusted from 670 to 970 millimeters, measured from the floor to the top edge of the wash basin. The depth is 260 millimeters. COLORS: White, red, dark blue, grey, or turquoise.
Wheelchair Cabinet Combo
The Wheelchair Cabinet Combo is an accessible vanity cabinet designed for use by people with mobility or lower extremity disabilities or spinal cord injury and other who use a wheelchair. This cabinet is intended to be used with a 21-inch deep counter. Each model features a recessed, angled cabinet that provides space for the feet of a wheelchair user so he or she can pull up to the counter edge. It is available with a standard cabinet with or without a drawer on top on one or both sides of rece
Wheelchair Lavatory (Models 051-2961, 051-2964, & 051-2968)
The Wheelchair Lavatory, models 051-2961, 051-2964, and 051-2968, is an accessible sink designed for use by individuals who use wheelchairs. This china sink is held with a concealed arm carrier (not included). OPTIONS: Chrome wheelchair lavatory drain (model 803-0530) with 1.25-inch OD tailpiece. DIMENSIONS (LxW): 20.5 x 27.25 inches, with faucet holes on 4-inch centers (model 051-2964) or 8-inch centers (model 051-2968).
Wheelchair Vanity Cabinet
The Wheelchair Vanity Cabinet is an accessible vanity designed for use by people with mobility or lower extremity disabilities or spinal cord injury and other who use a wheelchair. This vanity has a 21-inch deep counter with a recessed, angled cabinet underneath that provides space for the feet of a wheelchair user so he or she can pull up to the counter edge. It is available in 8 widths with 2, 3, 4 or 5 cabinet doors (more doors are available with increasing widths). All sizes are available ma
Worthington Barrier-Free Lavatory (Model 442038)
The Worthington Barrier-Free Lavatory, model 442038, is an accessible sink designed for use by individuals who use wheelchairs. This lavatory sink is wall-hung, leaving the space below the sink open for wheelchair access. The large sloping basin ensures that water remains in the sink. The sink is made of Grade A vitreous china, drilled with 8-inch centers, and it can be installed with concealed arm carriers. DIMENSIONS (HxDxW): 12 3/8 x 21 x 22 inches. WARRANTY: Limited 5-year warranty.