Seating Systems
Results: 842
Bouncy Bands for Elementary School Chairs
Bouncy Bands for Elementary Chairs are designed for children with Attention Deficit-Hyperactivity Disorder to provide anxious or fidgety children a quiet, distraction-free way to get their wiggles out. Stretch to fit up to fifth-grade chairs. These latex-free bands are stretch to fit chairs with a distance of 13-17 inches between the chair's front legs. Once installed, the 4-inch support pipes help keep the bands secured even when chairs are lifted, moved and stacked. Loops are molded on both en
"u" Adjustable Width Tray Slide Bracket Attaching System (Model 32798)
The "U" Adjustable Width Tray Slide Bracket Attaching System, model 32798, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front and the configuration of the bracket enables it to be attached to the underside the of the tray and wrap around standard wheelchair armrest pads and attached to the underside of the armrest (mounting hardware is not included). These brackets can be mounted inside or
"z" Tray Slide Bracket Attaching System (Model 32799)
The "Z" Tray Slide Bracket Attaching System, model 32799, is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to the armrests from the front. and the configuration of the bracket enables it to be attached to the underside of standard wheelchair armrest pads and the underside of the tray (mounting hardware is not included). A hook-and-loop strap attaching system (not included) may be used in conjunction with these brackets
1.5-Inch Slide Bracket & Abs Spacer Plate
The 1.5-inch Slide Bracket, model AB-1530, and the 1.5-inch ABS Spacer Plate, model AB-1815, are mounting hardware components designed for anchoring removable postural supports to solid seat and back panels. The Slide Bracket includes an F44-0476 Knob. The Spacer Plate is used to protect upholstery and ease insertion and removal of the bracket.
3-Inch 90 Degree Bracket & 6-Inch 90 Degree Bracket
The 3-inch 90-degree Bracket, model LB-3030, and the 6-inch 90-degree Bracket, model LB-6060, are stainless steel brackets designed for constructing one-piece seating systems, attaching seats and backs together, or mounting lateral hip guides. The brackets have slotted holes for assembly into T-nuts after upholstery.
3-Piece Indoor Swing System Combo Set
The 3-Piece Indoor Swing System Combo Set is a swing system designed for those individuals with cerebral palsy and neurological disability to play on. It encourages activity and brings the fun of outdoors into the user's home. Easy to install, lightweight and portable.Please allow 1-2 weeks for shipping. 10 percent off for a limited time.
3-Position Recliner Geri Chair
The 3-Position Recliner is a comfortable, durable geri chair with a leg ottoman and three possible positions; sitting, legs elevated, or fully reclined. The included blow-molded table can be locked in one of five positions, and slides on and off. Each 3-Position Recliner has a contoured seat back and articulating headrest for extra comfort. A special crossweave in the foam back and seat cushions supports the user and prevents "bottoming out". Blow-molded side panels are easy to remove and clean,
4 Cup Coffee Caddy
The 4 Cup Coffee Caddy is designed for use by individuals with mobility disabilities. The plastic tray is designed to handle any size of hot or cold beverage drinks. Additionally, the device is sturdy, durable and reliable for users with grasping disabilities.
4 D Lapboard Adjustable Bracket Mount (08-3000 Series)
Lapboard adjusts vertically, laterally, front and rear. Adjustable tilt. 1/2 inch clear acrylic. Sizes: 24 by 15 inches (08-3111), 22 by 13 inches (08-3211), 20 by 11 inches (08-3311). Also available in 1/4 inch clear acrylic ($300.00). Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch ABS plastic, 1/4 inch lexan, cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.
4-Piece Indoor Swing System Combo Set
The 4-Piece Indoor Swing System Combo Set is an indoor pull-up bar designed for those individuals with cerebral palsy and neurological disabilities to swing on. It encourages activity and brings the fun of outdoors into the user's home. Easy to install, lightweight and portable.Please allow 1-2 weeks for shipping.
6-Seater Picnic Table- Fits 2 Wheelchairs
This product is designed for people who use wheelchairs. It is a 6-seater picnic table and has room for 2 wheelchairs to also be seated at the table. It is made from high-pressure wood from sustainable sources – FSC Certified. Item will arrive “flatpacked” to save transport costs. DIMENSIONS: 40 millimeters deep and 90 millimeters across with “eased” edges. 2.3 meters length, seat height is 470 millimeters, seat width is 750 meters. Wheelchair gap is 800 millimeters. Overall height is 780 millim
6610 Chest Support
The 6610 Chest Support is a torso support and harness restraint designed for firm trunk support. The support is made of foam with an inner moldable core that can be formed to follow body contours. The yokes have straps for attachment to high back standard wheelchairs, travel chairs, and strollers. Placement holes are pre-cut in yokes for adjustments in size. The support has quick release buckles, a lap belt with pivotal mounts, and a polypropylene strap with nylon quick release buckle that goes
6620 Modular Chest Support
The 6620 Modular Chest Support is an adjustable torso support that allows individualization to fit different body variations. The support has removable yokes that are interchangeable between sizes, an inner core that allows the support to be shaped to fit, and an outer foam covering. Straps can be mounted to the back of a chair and have quick release buckle fasteners. The lap belt has a pivotal mount so the pull at the hips comes at the desired angle. Component sections can be ordered separately
6625 Trunk Support Bar & 6626 Trunk Support System
The 6625 Trunk Support Bar and the 6626 Trunk Support System are torso support and pelvic stabilizers designed for use when an individual is seated in a wheelchair or custom seating system. TRUNK SUPPORT BAR: The bar is made of an inner core of molded nylon with a vinyl coated foam cover. It has a 2-inch polyporpylene strap with a quick release buckle on one side and molded slots on the top and bottom of the core to enable straps to be atached if extra positioning is desired. A crotch strap can
6628 Side Opening Head Support
The 6628 Side Opening Head Support is designed for use by individuals who are unable to independently maintain proper head positioning. Available in three sizes, this support cradles the entire head and may be used mounted or unmounted to a seating system or wheelchair. Made of closed cell vinyl-coated foam, the support features reinforced front and back plates, a hinge on one side, and a quick release buckle on the other side for ease in use. SIZES: Unmounted extra small, unmounted small, unmou
6630 C-Collar And 6635 Extended C-Collar
The 6630 C-Collar is a neck support contoured for the lateral and posterior neck areas to help prevent neck hyperextension. The 6635 Extended C-Collar is the same as the C-Collar with a clavical support added. Both collar can be used in conjunction with most seating units, and used during classroom activities and feeding. DIMENSIONS: C-Collar is 8 x 3.5 x 2 inches; the Extended C-Collar is 8 x 10 x 2 inches. COLOR: Black or Casa Tan.
6650 Half Mask
The 6650 Half Mask is a headrest accessory designed to provide head support for forward thrusting individuals. The mask follows the contours of the forehead and cheeks to help hold the head comfortably within a headrest. A replaceable terrycloth pad lines the foam mask, and an aluminum inner core allows the headpiece to be formed to fit the face. For mounting purposes, one side of of the mask can be attached directly to headrest; the opposite side fastens with snap buckles. OPTIONS: 6650 Mount P
6674 Lap Strap Cover
The 6674 Lap Strap Cover is foam strap padding that wraps around seat belt or lap belt webbing to prevent digging into sensitive skin or other pressure areas. This padding can also be used for backpacks, shoulder bags, etc. The cover is designed for use with 1.5- or 2-inch lap straps. DIMENSIONS: 14 inches (Small) or 18 inches (Large). COLOR: Black or casa tan.
6676 Contour Covers & 6678 Harness Covers
6676 Contour Covers and 6678 Harness Covers are padded covers for lap belts and shoulder straps. The covers are made of vinyl coated foam tubes that slide over belts and straps. The covers are flexible and washable. The 6678 model is designed for use with 1- or 2-inch straps. DIMENSIONS: Contour Covers are 12 x 2 inches, and Harness Covers are 8 x 1 inches (Small) or 12 x 2 inches (Large). COLOR: Black.
6800 Seating Accessory System
The 6800 Seating Accessory System is designed to provide head and trunk support to feeder seats. A pre-formed aluminum bar incorporates an attached head positioner with the Danmar chest support. The chest support's lap belt goes through existing strap holes and the bar fits around the seat and is secured with channel brackets (included). SIZES: Small, with lateral head support provided by foam pads, wedged and formed, to cradle the head; Medium and Large, both with full C Collar for side suppor
6809 High Back Hensinger Head Support
The 6809 High Back Hensinger Head Support is a head and neck support that consists of the 6810 Hensinger Head Support (see separate entry) with a 1.5 to 2 inch higher back for additional occipital support. The cushions are made of vinyl coated foam. The device comes unmounted or mounted. SIZES: Extra Small, Small, Medium, and Large. COLOR: Blue or black.
6810 Hensinger Head Support
The 6810 Hensinger Head Support is a wrap around collar designed to support the head by using base support areas at the occiput and jaw line. Manufacturer recommends this support be used in conjunction with chest support to help maintain mid-line head positioning. (Proper head positioning should result in improved breathing, swallowing, and simplified feeding; and may also be conducive to more social interaction and awareness during classroom activities.) The support fastens with a one-snap rele
6812 Modular Head Rest
The 6812 Modular Head Rest with Mount Plate is a head and neck support designed for use with the Hensinger Break-Away-Mount Plate (see separate entry). An adjustable vertical connector attaches the two devices together. Three vinyl coated foam discs cradle the head and may be adjusted for the use of head switches. COLOR: Black.
6814 Lateral Head Support With Mount Bar
The 6814 Lateral Head Support with Mount Bar is a headrest designed for use with feeder seats that can be positioned to support from the occipital area and higher. The support is made of foam padding that comes around the sides of the head to provide support. SIZES: Small, Medium, Large, and Extra Large. COLOR: Bright blue, black, orange, red or teal. These custom colors are available for an additional $26: Baby blue, forest green, silver/gray, maroon, pink, purple, royal blue, casa tan, white a
6815 Hensinger With Mount Bar
The 6815 Hensiger with Mount Bar consists of the 6810 Hensinger Head Support (see separate entry) mounted on an aluminum bar designed to be attached to TumbleForm feeder seats or Danmar Trunk Support (see separate entries). The device slides over the seat with back buckle fasteners. Channel brackets for securing the bar after the head support is positioned are included. SIZES: Small, Medium, Large or Extra Large. COLOR: Bright blue. These custom colors are available for an additional $26: light
6821 Size Reducer
The 6821 Size Reducer is a foam insert designed to accommodate persons between sizes of the Hensinger Head Support (see separate entry). The vinyl coated foam insert fits into the inner circumference and has velcro straps which wrap around the head support. There are two models: Narrow and Wide. The narrow model can be used over or under the covers. The wide model adds some additional occipital support as the top foam piece folds over the back of the Hensinger. SIZES: Narrow or Wide. DIMENSIONS
6830 Sweep Headrest
The 6830 Sweep Headrest is a wrap around headrest with an occipital convex foam cushion built in across the bottom of the center pad to cradle the head. The support has two small wings that form the sides, angled at 60 degrees off center back pad. The heavy duty back plate has pre-threaded 1/4-20 metal inserts for mounting and eight 1-inch bushings which can be used as spacers to adjust the distance of the headrest to the head. The product can be ordered with or without mounting hardware. An opt
6925 Portable Abductor
The 6925 Portable Abductor is an abduction pommel for use out of a seating system that attaches to each leg with adjustable, nonremoveable straps. The curved foam center cushions the calf, knee, or thigh area. DIMENSIONS: 4 x 3 x 4 inches (Small) and 5.5 x 4.5 x 6.5 inches (Large). COLOR: Bright blue, casa tan or yellow. SIZES: Small or Large.
7901 Hensinger Covers
The 7901 Hensinger Covers are replacement covers for the 6810 Hensinger Head Support and the 6809 Hensinger Head Support with High Back (see separate entries). They are made of a cotton blend. SIZES: Extra small, small, medium or large. COLOR: Black or blue.
7902 Hensinger Strap
The 7902 Hensinger Strap is a replacement straps with either a snap buckle or an adjustable slide buckle designed for the 6810 Hensinger Head Support and the 6809 High Back Hensinger Head Support (see separate entries). The straps are attached to the back plate. An optional velcro closure is available. SIZES: Extra small, small, medium or large. COLOR: Black.
7903 Hensinger Quick Release Mount Plate
The 7903 Hensinger Quick Release Mount Plate is a headrest accessory for the Hensinger Head Supports (see separate entries). The plate has 2 straps that attach the unit to the back of a seating unit. The Hensinger Head Support attaches to the plate with velcro. The velcro release will allow the head to move forward with the body. For permanent mounting, 2 screws are used to insure that the front and back plate stay connected. DIMENSIONS: 12 x 4 inches. COLOR: Black.
7906 Chest Support Straps
The 7906 Chest Support Straps are torso support accessories for the 6620 Modular Chest Support or the 6800 Seating Accessory Systems(see separate entries). SIZES: Infant, extra small, small, medium or large. COLORS: Black or rainbow. STRAP OPTION: Option C is standard. Option A, Option B and Yoke are available.
7907 Chest Support Hardware
The 7907 Chest Support Hardware is a torso support accessory for the 6610 Chest Support (see separate entry). STRAP OPTION: Bottom or yoke.
7908 Reinforced Yoke Area For 6610
The 7908 Reinforced Yoke Area for 6610 is a torso support accessory designed for use with the 6610 Chest Support (see separate entry) to reinforce areas receiving hard wear. The yoke is a clear PVC (plastic) extruded tubing that is placed around the inside edge of the full yoke area. COLOR: Clear
7910 Elongated Yoke Area For 6610 Or 6620
The 7910 Elongated Yoke Area for 6610 or 6620 is a torso support accessory designed to replace the straps of the Danmar Chest Supports (see separate entries). This flexible plastic strip helps to prevent the straps from getting caught in the spokes of wheelchair wheels. A buckle is attached to one end that snaps into the chest support and the other end is permanently mounted to the wheelchair base. COLOR: Black
7914 Half Mask Otto Bock Mount Plate
The 7914 Half Mask Otto Bock Mount Plate is a headrest accessory designed to mount the 6650 Half Mask (see separate entry) onto the Otto Bock headrest. The mask mounts with adhesive foam backing for breakaway release in the event of emergency impacts. COLOR: Black.
Abduction Contoured Pads (Models 1350, 1351-01, -21, -31,-32, -33, 1360, 1361-01, -21, -31, -32, -33, 1370, 1371-01, -21, -31, -32, & -33)
The Abduction Contoured Pad is an abductor designed to support the legs of an individual with spinal cord injury or severe physical or neurological disabilities in abduction while seated in a wheelchair. Curved to body contours, it can adapt to many positioning applications. The Abduction Contoured Pad is made of 16 gauge steel, zinc plated, and formed with recesses for ##10-32 press nuts to attach it to the interface hardware. These pads are padded and available covered with a variety of uphols
Abduction Wedge (Model 703075)
The Abduction Wedge, model 703075, is a abductor designed for use by individuals who use wheelchairs. This high-density foam wedge controls abduction contracture caused by sitting with the knees together for long periods. This wedge features Velcro straps for secure positioning and a removable, washable fabric cover.
Abduction Wedge / Knee Separator (Model 6307)
The Abduction Wedge / Knee Separator, model 6307, is an abductor designed to properly position the knees of individuals who use wheelchairs. The contoured sides of the machine-washable separator hug the thighs and maintain four to five inches of knee separation. Dual Velcro straps comfortably maintain positioning. DIMENSIONS (HxWxD): 7 x 4 x 5 inches.
Abductor And Hardware
Custom size abductor wedge of laminated woodcore surrounded by 1 inch medium density foam and covered with vinyl upholstery. Pre-attached to mounting bracket unless otherwise specified. Mounted by sliding a slotted aluminum fork onto a knob through a threaded T-nut underneath the seat. Fork provides depth adjustment of 3 inches. Designed to fit over seat with 2 inch thickness, but can be ordered for thicker seating if necessary. Abductor flips down below the seat for transfers when aluminum rele
Abductor Flip Down Kit (Model 31467)
The Abductor Flip Down Kit, model 31467, is seating hardware general designed to allow abductors and lateral pads to swing away during wheelchair transfers. Designed to be used with the manufacturer's Abductor Pads or Lateral Pads (see separate entries), this kit includes one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge, and mounting hardware. COLOR: Black.
Abductor Pad And Bracket
Oval or wedge shaped abductor pad. Naugahyde covered. Foam padded. Attaches to seat with brackets which flip below seat for easy transfers. Lever or button release. Adjusts forward and back for precise positioning. Made to fit most solid seats. 3 to 4 inches high, 4 to 8 inches long, 3 to 4 inches wide. Retractable available. .
Abductor Pads (Models 31429, 31430, 31431, 31466S, 31466M, & 31466L)
The Abductor Pads are designed to aid in positioning people who use wheelchairs. Made of textured urethane self-skinning foam, these pads come with 10-32 T-nuts embedded in all mounting holes. Models 31429, 31430, and 31431 have one-inch on center mounting holes and the 31466 series have 1.5-inch on center mounting holes. SIZES: Both styles come in small, medium, and large. DIMENSIONS: All pads are three inches tall. The small models are 3 inches wide in the front and 3.5 inches wide in the back
Abilitations Foot Rest
Abilitations Foot Rest is designed to anchor to any standard elementary school-sized chair. It allows a student to sit with proper posture. The footrest works as a great sensory input for students, as they get to have both feet on a flat solid surface. Features two strips of adhesive tape, and non-slip bottom.
Abs Plastic Tray (Models 1719, 2121, & 2124)
Molded ABS Lapboard with an edge rim. Three sizes: 17 1/2 by 19 1/2 inches; 21 1/2 by 21 inches; and 21 1/2 by 24 inches. Attaches to wheelchair armrest with bayonet style hardware, adjustable for different wheelchair widths. Accessories: clear (PET) shield that snaps onto the tray for use with symbol charts. The shield becomes scratched with use and must be replaced when it becomes difficult to see through.
Abs Plastic Trays
ABS Plastic Trays can be used on wheelchairs and prone standers. The front edge and sides have a rim to prevent objects from falling off the tray. Models are available with or without cutouts. Tray glides available. DIMENSIONS (WxD): 20 x 20 inches with a 5 inch cutout (Child); and 24 x 20 inches with a 6 inch cutout (Adult). COLOR: Beige.
Accu-Back Adjustable Lumbar Roll
The Accu-Back Adjustable Lumbar Roll is designed for use by individuals with lower back pain, injury, or arthritis. This device is a half lumbar roll measuring 5 x 11 x 2 - ½ inches. Additionally, it relieves neck and back pains as well as sitting discomfort. It is hypo-allergenic stain resistant.
Accu-Back Back Supports
The Accu-Back Back Supports are a portable back support cushions made of fire-retardant fabric and temper foam. Twelve models are available: an executive model has two vertical lumbar pads and shoulder rest, deluxe executive includes a seat pad in single unit, economy pillow back has back rest with single horizontal lumbar support, deluxe includes shoulder rest. Also 3 models with no additional parts needed. COLOR: Variety.
Acculift Back Support System
The AccuLift Back Support System is designed to provide lumbar support and to reduce the chance of lower back injury for persons working around the home, or on the job where any type of lifting is performed. As an injury prevention product, its technology was developed by orthopedic surgeons. The support system fits around the waist with cris-crossing straps in the back.
Activity Lap Tray (Model 17698)
The Activity Lap Tray, model 17698, is a lapboard or lap tray designed for use by children ages 3 years and above and adults with mobility disabilities. Made of polypropylene plastic, this tray fits over the lap when the user is seated. The Activity Lap Tray consists of a firm flat tray between two side pockets that extent below the tray and act as the supports when the device in placed on the lap. On the tray, the user can write, play games, create crafts and perform other activities. The side
Acuback Heat Roller For Back Pain Relief
The Acuback heat roller is designed to relieve tension with therapeutic warmth. IT is microwavable and offers back and neck support. Nubby or textured supports create acupuncture-like therapy to release tight muscles and the design recreates the natural curve of the lumbar spine. Realigns the upper back and neck. Place it under neck, lower back, legs, or hands. Warm in microwave for one minute for 75 minutes of deep, soothing heat. Carrying case included.
Adalap
The ADALAP is a lap desk designed for use by individuals who use wheelchairs. The basic unit includes the base and pole with a top plate with a Velcro loop. Made from lightweight anodized aluminum alloy with stainless steel fasteners, the unit has a base that slides right under the wheelchair seat cushion. Height adjustment is accomplished with a quick-release clamp.OPTIONS: Fresh or salt water fishing rod holder; Snap Lap Desk; Lap Shopper shopping basket; lap tray; accessory mount for camera,
Adapt-A-Tray
The Adapt-A-Tray is a laptray designed to provide upper body positioning for people with spinal cord injury or neurological or severe physical disabilities who use wheelchairs. The system incorporates a tray with a hole-punched surface to enable attachment of brackets and padded blocks to aid in positioning of the upper extremities, equipment, communication aids, or activities. The starter kit includes one tray with holes, one overlay to create a smooth tray surface, four 45-degreec attachment b
Adapted Cardboard Chair
The Adapted Cardboard Chair is designed for those individuals with lower extremity disabilities to sit in. This is an adapted chair made of corrugated cardboard, glued and laminated 5 layers of open boxes and then all cut out with a knife. Then the pieces were hot glued and taped in place. To finish the chair, it was covered it with paper mache and painted.
Add-On Tray, The
DO IT YOURSELF ENTRY --- PURPOSE: To keep crayons, drinks, and other items within reach of a wheelchair user. The add on tray shown was custom built of 3/8-ply to slide over the standard wheelchair tray. Multiple compartments allow her to keep crayon colors and other small items organized and hold drinks. TITLE: The Add-On Tray. WEB SITE: Workshop Solutions at http://www.workshopsolutions.com/COMPLETE/ad_on_tray.htm. REF: The originator, Tom Jeary, can be contacted at tlj@golden.net.
ADI Aluminum Series Back Support - Extra Tall
The ADI Aluminum Series Back Support - Extra Tall is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. ADI rides back support results in less pain due to more equally distributing forces through the pelvic base of support. ADI backrest is designed to give very low trunk support through different contours. Aluminum series back support is ergonomically designed product to provide relief from the low back strain on the wheelchair. ADI back support p
ADI Aluminum Series Back Support - Medium
The ADI Aluminum Series Back Support – Medium is designed for use by individuals with lower extremity. The ADI back support provides with mounting options to give adjustable or fixed positioning. ADI backrest is designed to give very low trunk support through different contours. Aluminum series wheelchair back provides with optional lateral supports to help client in balancing its position. Back support – medium is ergonomically designed product to provide relief from the low back strain on the
ADI Aluminum Series Back Support - Standard
The ADI Aluminum Series Back Support – Standard is designed for use by individuals with lower extremity. ADI aluminum series back support - standard is an option to get rid of inefficient, non-supportive alternatives. Aluminum series wheelchair back provides with optional lateral supports to help client in balancing its position and provides aids in preventative postural decay. Standard backrest is designed for lightweight wheelchair which provides strong components available for the active user
ADI Aluminum Series Back Support – Low
The ADI Aluminum Series Back Support – Low is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The ADI aluminum back support is designed to distribute the weight and force of the pelvic equally. ADI backrest is designed to give very low trunk support through different contours. Aluminum backrest is easily attached to the necessary height on the back posts of the wheelchair. Aluminum series wheelchair back provides with optional lateral supports
ADI Carbon Fiber Series Back Support - Low
The ADI Carbon Fiber Series Back Support – Low is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The ADI carbon fiber series back support - low is an ultra-lightweight seatback which designed especially for proper posture, eases the strain on the low back. CF series back support – low results in less pain due to equally distributing forces through the pelvic base of support. Back support – low ADI carbon series backrest is for that individual
ADI Carbon Fiber Series Back Support - Medium
The ADI Carbon Fiber Series Back Support – Medium is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The ADI carbon fiber series back support - medium results in less pain due to equally distributing forces through the pelvic base of support. ADI back support - medium is for that individual which knows the importance of seating and demands for lightest and strongest components available. Carbon fiber series back support is an ultra-lightweight
ADI Carbon Fiber Series Back Support – Standard
The ADI Carbon Fiber Series Back Support – Standard is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The ADI carbon fiber series back support - standard provides with optional mounting hardware to fit the specific needs of the clients. ADI back support is an ultra-lightweight seatback which designed especially for proper posture, eases the strain on the low back. Carbon fiber series back support results in less pain due to equally distributin
Adjustable Back
The Adjustable Back is a molded plastic backshell to fit 16, 18 or 20 inch width wheelchairs. The Back ($238) is two inches narrower than the wheelchair frame to fit between back uprights. It mounts to the wheelchair with an adjustable system which allows three inches of height adjustment and angle adjustment from upright to 15 degrees of recline. Mounting hardware ($266) is available to fit 3/4 inch, 7/8 inch, or 1 inch diameter frame tubing. It is easily removeable from the chair by retracting
Adjustable Channel Bracket Mount For Lapboard (Model 08-2000)
Lapboard with adjustable channel, mounts to arm of wheelchair with bracket. 1/4 inch clear acrylic. Sizes: 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.
Adjustable Footrest
Tubular L-bar with adjustable angle footplate, heel loop and ankle strap. Small for 12 and 14 inch chairs, large for 16 and 18 inch chairs.
Adjustable Head Support
The Adjustable Head Support is a padded head positioner with support legs designed to enable the head to be supported in prone, supine, or seated positions. The angle of support can be adjusted by altering the support legs. It may be useful for diagnostic testing, therapeutic massage, and cranial compression. OPTIONS: Extension legs are available. DIMENSIONS: Extension legs are five inches long.
Adjustable Height Channel Bracket Attaching System (Models 31897A & 31901A)
The Adjustable Height Channel Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These heavy-duty steel sliding spacers include all required mounting hardware for attaching to a tray (not included) and enable trays to slide on to the armrests from the front. The fixed braket, model 31897A, may be used with full-size and armrest-style trays and the flip-away bracket, model 31901A, is designed for use with armrest-style trays. The flip-away bracket perm
Adjustable J Hook Bracket Hardware Seating Package (Package 20Xx)
The Adjustable J Hook Bracket Hardware Seating Package, package 20XX, is seating hardware designed for use on a wheelchair. The Package includes a solid back insert including T-nuts; a solid seat insert including T-nuts; a wide, 1.5-inch offset seat to back hinge; a pair of 1- inch diameter tube two-hole J hooks; a pair of five-hole adjustable L brackets; a pair of 1-inch diameter tube six-hole J hooks; a pair of two-hole adjustable L brackets; a 1-inch diameter tube drop stop; and a 1-inch diam
Adjustable Kinder Chairs
The Adjustable Kinder Chairs are high and low positioning chairs designed for use by children ages one to seven years or up to 49 inches tall with mobility or physical disabilities. Features include a firm back and seat with adjustable seat depth and back angle. Other features includes a removable abductor pad, an adjustable footrest, and an abductor activity tray. The seat height adjusts to allow the child to work or play at a regular table. OPTIONS: Casters are available. DIMENSIONS (HxW): The
Adjustable Knee Spreader
The Adjustable Knee Spreader is a separator designed to maintain the knees in slight abduction while sitting. The device is made of chrome plated steel and aluminum, and lined with plastazote for pressure distribution. Thigh circumference is adjustable. DIMENSIONS: Width is adjustable from 3 to 6 inches.
Adjustable Leg Abductor (Models K6S & K7S)
Adjustable leg abductor for use on a flat surface. Six leg straps, adjustable hip straps standard. Fabricated of birch plywood and hard maple. Stain and mildew resistant pads with vinyl covers in blue or brown. Pads snap off for easy cleaning. K6S, 15 inches long. K7S, 24 inches long. Warranty available.
Adjustable Side Support Lumbar Cushion
The adjustable side support lumbar cushion designed to improve posture and reduce stress on the lower back. This cushion is firm and supportive, this cushion and positions users body in an ergonomic position. Has supportive side arms to keep users body stable and upright. Helps prevent users from slouching. Features an adjustable band and arms so the user can customize the comfort level. Can be used in an office chair, reading chair or car seat
Adjustable Split Solid Seat Insert (Model Ssp80Xx)
The Adjustable Split Solid Seat Insert, model SSP80XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an adjustable split seat, model MOD4900. DIMENSIONS: The foam is 1.5 inches thick.
Adjustable Trunk Supports
The Adjustable Trunk Supports are lateral supports designed to assist in positioning the body of wheelchair users. The supports mount to the side frame of wheelchairs.
Adjustable-Drop Hardware Kits (Models 32517 & 32518)
Adjustable-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four J-brackets, four L-brackets, and screws and locking nuts needed to adjust the brackets and to secure the brackets to the Drop Seat (see separate entry). The hardware in the Kits can be raised and lowered to adjust the Drop Seat. DIMENSIONS: Model 32517 fits chairs with 7/8-inch tubes and model 32518 fits chairs with one-inch tubes.
Adl Lap Tray (Model Nc94114)
The ADL Lap Tray, model NC94114, is a lapboard designed to provide writing, eating, and activity space for people who use wheelchairs. The tray's surface is impregnated with melamine, making it waterproof and easy to clean. The tray also features a depressed edge to prevent objects from rolling off, rounded corners, and Velcro straps to secure the tray to the wheelchair. DIMENSIONS: 23.5 x 22 x .25 inches.
Adult Wheelchair Tray (Model 766)
The Adult Wheelchair Tray, model 766, is an adjustable lapboard designed to fit all size wheelchairs. The top is mar-resistant wood grain laminate and has rims on three side. DIMENSIONS: 23 1/2 inches wide x 21 1/2 deep x 1/2 inch thick, cut out size 14 1/2 x 8 3/4 inches, rims 1/2 inch high.
Ael Hardware Line
Complete line of hardware for attaching seating components to wheelchairs. Includes seat and back hooks, trunk support brackets, abductor brackets, rail clamps, head and footrest brackets, power wheelchair control box brackets, and fastening hardware.
Alicover
AliCover is a foam material designed for use as a covering for orthoses. The cover is made of AliPlast 4E (see separate entry), a closed-cell polyethylene foam. The AliPlast 4E is laminated to a durable blue knit nylon, and the cover is applied with 3M Spray 90 or another adhesive spray to attach to the splint or support. AliCover is also available with an adhesive backing. DIMENSIONS: AliCover measures 1/16 x 29 x 8 feet ($33, no. 4437) or 1/16 x 29 x 50 feet ($120, no. 4438). AliCover Self-Sti
Alimed Aerocell Ii Pressure Relieving Wheelchair Cushions
The Alimed Aerocell II is a wheelchair cushion cover designed for individuals at risk of developing pressure sores. The cushion distributes pressure for even positioning for a more relaxed and comfortable sitting experience. The device is made out of black stretch nylon and its cover is washable. DIMENSIONS: Standard size is 18 inches length x 20 inches width x 4 inches depth. CAPACITY: 440 pound capacity. WEIGHT: 3.5 pounds. COLOR: Black. WARRANTY/GUARANTEE: As stated by the manufacturer.
Alimed Inflatable Lap Buddy (Model 77338)
The AliMed Inflatable Lap Buddy, model 77338, is a wheelchair lap board, positioning pad and wandering patient system designed to prevent wheelchair users with Alzheimer's disease or cognitive disabilities and balance or lower extremity disabilities from rising without assistance. It provides upper body support and posture assistance as well as a comfortable forearm and wrist/hand rest. The Inflatable Lap Buddy can support light activity, such as reading. It inflates quickly with a hand inflator
Alimed Seat Belt Alarm (Model 77667)
The AliMed Seat Belt Alarm, model 77667, is a seat belt and wandering patient system designed for use by individuals with Alzheimer's disease or cognitive disabilities and mobility disabilities. This dual-function seat belt keeps the patient in the chair and sounds an alarm if disconnected. The system also includes a flashing light to help caregivers to locate the correct individual if the alarm sounds. The belt can be adjusted to patient size. The system includes a metal mounting clip and gromm
AliMed SI Belt
The AliMed SI Belt is a muscle stabilizer belt designed for users with lower extremity disabilities, back pain, or muscle and ligament tensions. The belt stabilizes muscles and ligaments of sacroilliac joint. Hook-sensitive, 2 inch with non-elastic belt with nonslip interior conforms to body contours. Elasticized closure allows non-binding comfort during activity.
Alimed Super Constructa Foam
Alimed Super Constructa Foam is tough, lightweight, flexible but firm mini-cell polyethylene foam material designed for customized positioning, seating, and support systems. This waterproof foam can be used without covering or finishing, or vinyl-dipped if a tough skin is desired. The material withstands repeated compression and abuse and returns to its original shape. It can bear heavy weights for extended time periods. The foam is sold by the slab. DIMENSIONS: 1 x 24 x 48 inches (##4925), 2 x
Aliplast
AliPlast is a cross-linked, closed-cell, heat modable, polyethylene foam material used for a variety of orthotic applications. There are five types of AliPlast that vary in firmness and stiffness. ALIPLAST 4E: For padding and cushioning splints and casts. Tensile strength of 80 to 110; density of 4 pounds per cubic foot; compressive strength at 50 percent compression is 35 to 45. ALIPLAST 6A: Effective for foot orthotics and many types of hand splints. Tensile strength of 110 to 140; density of
Aliplast 2E Quickstick Padding
AliPlast 2E (Quickstick Padding) is adhesive-backed foam padding designed for use with splints for people with carpal tunnel syndrome or other upper or lower extremity disabilities. This soft, flexible, and waterproof padding is used with splints and strap padding or tool and utensil buildups. It consists of thermoplastic closed-cell foam that is resistant to perspiration, bacteria or odors. The padding can also be used for cushioning hard edges on beds and wheelchairs. For extra strong bondi
Alleviate Support System (Model 99444)
The Alleviate Support System, model 99444, is an arm and back support designed for use by dentists and dental assistants to prevent upper extremity injuries. The purpose is to relieve and reduce the occurrence of musculoskeletal pain and localized fatigue caused by excess weight placed on the shoulders when one or both arms are elevated away from the body during dental procedures. The unit includes a pair of gel elbow rests to provide comfort and support while absorbing vibration from instrument
Aluminum Series Back Support
The Aluminum Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. This contoured support is available for chairs from 10 through 20 inches in width. It is available with stationary or removeable mounting and adjustable positioning. It clamps to 0.6 through 1 inch tubing, round or oval, with no spacers required. The unit is compatible with 2-Point Pro and Quick Release mounting systems. SIZES: Low, medium, standard, tal
Aluminum Shells
Aluminum Shells are designed for mounting on cushions in seating systems. Sizes range from 12 to 18 inches in width, 10 to 22 inches in length. Each shell has pre-punched holes for attaching interfacing hardware and accessories. They will fit Contour-U, Sunmate, Jay, T-foam, Roho, or custom cushions. The shells will support body weight up to 250 pounds.
Ankle/foot Straps
Pair of velcro straps with mounting hardware and D-ring closures. Can be mounted to padded footboards or existing wheelchair footrests, positioned to strap ankle or forefoot.
Anna-Dote
Anna-Dote is a back support cushion and solid back insert designed to aid individuals who use wheelchairs, or straight-back/recliner geriatric chairs to sit upright, allowing for the reduction in stress, discomfort and fatigue that can accompany a slouched to the side position. This positioning supportive aid fits over the backrest of either a wheelchair or a geriatric chair and provides patients with an extended backrest to keep them upright and prevent falling or sliding to the side of the cha
Anti-Thrust Solid Seat Insert (Model Ssp40Xx)
The Anti-Thrust Solid Seat Insert, model SSP40XX, is a solid seat insert designed for use on wheelchairs. The solid seat insert includes HR foam, T-nuts, and an anti-thrust seat, model MOD4400. DIMENSIONS: The foam is 1.5-inches thick.
Arm Tray Lateral Stabilizer (Models 706140, 706141, & 706142)
The Arm Tray Lateral Stabilizer is a combination lateral trunk support and arm trough designed for use by individuals who use wheelchairs. This foam-padded stabilizer fits wheechairs with full-length arms and reduces lateral leaning while providing improved arm positioning. Model 706140 has a washable polyester cover, model 706141 has a washable synthetic sheepskin cover, and model 706142 has a spray-and-wipe clean nylon cover.
Arm Tray With Arm Tray Pillow (Model A74610)
The Arm Tray with Arm Tray Pillow is an arm trough designed to provide arm support for people with upper extremity disabilities who also use wheelchairs. This tray features a comfortable, polyester fiber filled pillow containing extra filling underneath the hand for elevation to help reduce edema. The forarm portion of the pillow cups the arm, padding the sides and base of the tray. It includes all straps to securely position the pillow in the tray and the arm on the pillow. The pillow is machin
Arm Tray With Straps (Model A7461)
The Arm Tray with Straps, model A7461, is a plastic arm trough designed to provide arm support for people with upper extremity disabilities who also use wheelchairs. The tray is equipped with three Velcro straps to secure the device to the wheelchair and Kushionflex pad to buffer any potential area of irritation. The tray can be secured on chairs with standard arms using three straps and on chairs with desk-length arms secured by only two straps. DIMENSIONS: The straps are one inch wide and the
Arm Tray.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides support, elevation, or both for the forearm and hand of an individual setting in a wheelchair. Directions and materials given for 2 sizes of arm tray. diagram. similar to commercially available product. Attaches to wheelchair armrest. SKILLS REQUIRED: Woodworking, plastics. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneapolis, MN; p 47- 48. 1976.
Arm Trough (Model 07-D)
Arm trough has molded plastic shell with energy absorbing foam pad covered with molded naugahyde skin. Provides full support from elbow to hand. Overall length is 18 1/2 inches; bed length is 15 1/2 inches, depth, 1 1/4 inches; elbow stop is 3 1/2 inches long and 2 1/2 inches high; inside width is 4 inches, flares at front to 6 1/2 inches.
Arm Trough (Model 09-2000)
The Arm Trough, model 09-2000, is an arm trough designed to support and position the arm for use with seating systems and wheelchairs by individuals with mobility and neuromuscular disabilities. For use with on the left and right arm, the Arm Trough is made of .25-inch Kydex with 1-inch nylon webbing straps with faux sheepskin covers. Hook and loop straps or buckle closure are standard. SIZES: Small/pediatric, medium/adolescent and large/adult. DIMENSIONS (LxW): 12 x 4.5 (small); 17 x 5 (medium)
Arm Trough (Model 09-4000)
The Arm Trough, model 09-4000, is an arm trough designed to support and position the arm for use with seating systems and wheelchairs by individuals with mobility and neuromuscular disabilities. The trough is designed with a curved shape to help protect and keep the forearm in place and features a soft durable Lycra neoprene liner to help reduce skin irritation. Other features include an elbow block to keep the arm stationary in a tilted or reclined position, and a padded wrist strap with Velcro
Armrest Cushions (Models 436A4 & 436A5 Series) & Channel Armrest (Models 436A2 & 436A3)
The Armrest Cushions, models 436A4 and 436A4 series ($63 to $21), and the Channel Armrest, models 436A2 and 436A3 ($35 to $32), consist of steel reinforced armrests, injection molded with self skinning foam. Straight armrests, and desk or full length sizes are molded to cradle the arm for support. The Channel interchangeable armrest is molded to cradle the elbow and arm with several different hand pads available. The Cushions can be mounted directly to standard wheelchair arms or used with the 4
Armrest Fixed Bracket (Model 31897)
The Armrest Fixed Bracket, model 31897, is an add-on armrest bracket designed to allow any tray to be attached to wheelchairs. The 1/8-inch steel bracket has a baked epoxy finish. INSTALLATION: The bracket is attached to the underside of the tray using the included hardware; the tray is then installed on a wheelchair by sliding the bracket over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 days from the date o
Armrest Flip-Away Bracket (Model 31901)
The Armrest Flip-Away Bracket, Model 31901, is a bracket designed to connect trays to wheelchairs and allow the trays to be flipped up 90 degrees. The bracket is 1/8-inch steel with a baked epoxy finish and includes an aluminum flip bar and spacers. INSTALLATION: The bracket is attached to the bottom of the tray with the included hardware; the bracket slides over any standard or padded armrest. WARRANTY: The manufacturer warrants this product against defects in workmanship and materials for 90 d
Armrest Inhibition Cradle
The Armrest Inhibition Cradle is an ABS plastic contoured arm trough with velcro-in vinyl pad. The trough has forearm and upper arm sections. The adjustable mounting hardware clamps to standard 7/8 inch tubing armrests.
At Ease Adjustable Foot Support (Model Fs18Aj)
At Ease Adjustable Foot Support, model FS18AJ, is a foot support designed to promote proper posture, reduce fatigue and back strain and relieve stress on the legs, back and neck. The tilting support platform allows the user to vary the leg position and aids in circulation in the legs and feet. This foot support adjusts in height and angle and is ideal for workstations with multiple users. The platform is made of molded and texturized plastic and the frame is made of durable chrome tube. The supp
At Ease Contour Lumbar Support (Models L250 & L500)
The At Ease Contour Lumbar Support, models L250 and L500, is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. The support promotes proper posture while providing firm support and comfort to the lower back. An orthopedic design relieves tension and supports the spine. It is made of molded high resilient urethane foam and the removeable cover is made of washable polyester. The strap in the b
At Ease Half Roll Lumbar Support & Full Roll Lumbar Support (Model L50 & L100)
The At Ease Half Roll Lumbar Support and Full Roll Lumbar Support, models L50 and L100 is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. The support promotes proper posture while providing firm support and comfort to the lower back. The polyurethane foam is comfortable and has excellent recovery. The durable polyester cover is removable and washable. The elastic strap is designed to fit
At Ease Standard Foot Support And High Foot Support (Models F300 & F600)
The At Ease Standard Foot Support and High Foot Support, models F300 and F600, are foot supports ergonimcally designed to support proper posture, reduce fatigue and back strain and relieve stress on legs, back and neck. The tilting support platforms allow the user to vary leg positions and aids in circulation in legs and feet. Both models have a durable wooden platform laminated with a non-skid vinyl surface; a lightweight chrome frame; and rubber feet to hold it in place. DIMENSIONS: Models F30
Attaching Hardware Kit (Model 31096H)
The Attaching Hardware Kit, model 31096H, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four truss head phillips screws, four mushroom head T-nuts, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included).
Attaching Hardware Kit (Model 33066)
The Attaching Hardware Kit, model 33066, is lapboard mounting hardware designed to attach lapboards and trays to wheelchairs. This kit includes four 10-24 x 3/8 inch flat socket head screws, four 10-24 x 0.5 inch flat socket head screws, and four plain T-nuts and provides sufficient hardware to attach two clamps or brackets to a tray (tray not included). COLOR: The screws are black.
Auto Style Hip Belt (Model Ee 3D/103-6000)
Wheelchair seat belt, nylon webbing and auto style push button buckle. Has a pair of iliac crest relief pads so the the belt may be cinched tightly without causing pressure on the bony prominences. Should be mounted at a 45í angle to the seat.
Axion Rotary Interface For Wheelchair Headrests
The Axion Rotary Interface™ for Wheelchair Headrests is a headrest accessory designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. This device permits wheelchair headrests to rotate, and it attaches to most existing wheelchair headrests and hardware. This unit is quiet, free-running, and it does not require lubrication. The range of rotation can be limited or stopped.
Back Bar Mount, Nonpivoting Trunk Supports (Model 105-2000)
Lateral trunk support for adaptive positioning. 1/4 inch ABS plastic base with separate removable or replaceable cushion. Can be used with a sling or solid back. Pads are straight, not contoured and can adjust vertically, horizontally and front to rear. Universal pad mount allows pad to be oriented to body. Mounts on back frame. Nonpivoting. Sizes: 4 inches long by 3 inches high, 5 inches long by 4 inches high, 6 inches long by 5 inches high, 7 inches long by 6 inches high. Custom sizes availabl
Back Jack (Models Bj-M & Bj-Xl)
The Back Jack is a back support cushion designed to provide support when sitting on the floor. All models feature a slightly reclined back and a wedge seat. They have a steel frame with a foam seat pad and a canvas cover. SIZES: Medium (BJ-M) or extra-large (BJ-XL). DIMENSIONS (HxDxW): 20 x 11 x 14 (medium) or 21.5 x 12.5 x 16 x 12.5 (extra large).
Back Pain Wedge
Back Rest, Sport Seat, & Seat Rest Self-Inflating Cushions
Open cell foam back rest with airtight, waterproof nylon shell. Self inflates; valve to adjust user's comfort. Size 16 by 8 by 2.5 inches; blue, cedar brown covers available. Also available: Seat Rest, similar product for seat of chair, size 12 by 16 by 1.5 inches; price $65.00; Sport Seat, like Seat Rest except heavier duty covering, in navy, rust, or green.
Back-Huggar
The Back-Huggar is a back support pillow designed for use by individuals with back pain or injury. It is constructed of polyurethane foam with a cloth, hand-sewn cover with a zipper. The Back-Huggar is available in four styles: Standard fits most straight back chairs and auto bench seats; Bucket Seat for designed for auto bucket seats and cureved back chairs; Secretary for open back chairs; and Extra Wide for wider backs. Elastic straps for attaching support to seats and chairs are available; t
Back2Go Back Support
Back2Go Back Support is designed for children to strengthen posture and trunk on a chair, wheelchair, or stroller. It features a two-strap system with buckle closure to secure back support to an existing back surface. Straps can be stored in back pocket when not in use. The height and width can be adjusted. It has removable lateral supports for additional support. There is a zippered vinyl trunk harness in an “H” configuration for anterior chest support.
Bakrol
The Bakrol is a lumbar support designed for use by individuals needing to keep the lumbar spine in extension. Made of high-resiliency foam, rhe roll is available in a choice of regular or high density and is equipped with a washable cotton cover with a strap with a quick-release buckle. DIMENSIONS: The regular density comes in 11 x 5 inches or 12 x 4 inches and the high-density is available in 12 x 4 inches.
Ball Ratchet Set
The Ball Ratchet Set is a seating hardware allowing angle adjustment in 5 degree increments. It is made of cast and heat treated alloy steel. It can be bolted or welded inside 7/8 inch diameter by 18 gauge round tubing. The Set is useful for legrests, seat to back attachments, and other seating applications. It is available in chromed or unchromed.
Band-It
Band It is an ankle strap designed for use by individuals with lower extremity and neurological disabilities who use wheelchairs. This positioning device is designed to be secured around the ankle, with the body of the device extending over the top of the userÆs shoe and orthosis. The device has a dynamic component that allows some movement at the ankle to prevent joint stiffening and full body tonal reaction, and reduce buttock shear. The device has a side-squeeze closure that can withstand 250
Base Mate Modular Adaptive Seating System
Geriatric chair on wheeled based for persons ranging from 4 feet 2 inches to 6 feet 4 inches in height. Anterior wedged seat, seat depth adjustable 15 inches to 21 3/4 inches in 3/4 inches increments, lower back section is 11 1/2 inches high. Upper back section comes in three sizes. Quick release side support panels, angle adjusters to adjust seat to back angle, quick-release contoured headrest, and safety belt. Four casters, two with locks.
Bean Bag Dinner Tray
The Bean Bag Dinner Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury. Designed to rest directly on the user's lap, this plastic tray attaches to a bean bag with a hook and loop strap. The removable bean bag provides a form fitting and comfortable support on the user's lap. The tray's raised edges are intended to stop items such as cups and plates from accidentally sliding off the tray. DIMENSIONS (WxD): 16 x 12 inches. COLOR:
Bedlounge
The BedLounge is a back support cushion designed for use by individuals with physical disabilities. Resembling a chair without a seat, this large cushion enables the user to sit upright in bed and provides support for the upper and lower back, arms, shoulders, neck, and head while the user reads or watches television. This padded support has a lightweight internal polypropylene frame and features pivoting armrests and a height- and angle-adjustable headrest pillow. Storage pockets on the armrest
Bi-Angular Back Bracket
The Bi-Angular Back Brackets are stainless steel brackets designed for attaching two solid back sections at 160- (model BB-6060), 165- (model BB-6065), 170- (model BB-6070), or 175- (model BB-6075) degree angles.
Bi-Level Footrest Extender (Series 7033)
The Bi-Level Footrest Extender is designed for use by people who use wheelchairs and who have leg-length discrepancy. The extenders can be selected in a right-left or left-right combination and they feature a vertical centerboard which prevents the feet from crossing over and a padded legrest to prevent the feet from slipping off the footrests. DIMENSIONS: The extenders are available in a choice of 16 or 18 inches wide and with 1- and two-inch pads, 1- and 3-inch pads, 1- and 4-inch pads, 2- and
Bitty Bottom Cushion Seat
The Bitty Bottom Cushion Seat is a soft seat designed to make smaller children, who need to wiggle, fidget and move, focus and concentrate while they improve their balance, flexibility and circulation. Inflate (with standard ball needle) to desired level. Use on the floor, chair, during mealtime or anytime. Eight inches across.
Black Trays
The Black trays are wheelchair lap trays designed for use by individuals who use wheelchairs. These PVC trays are equipped with attached rims and are difficult to crack. SIZES: Infant, child, and adult sizes. COLOR: Black.
Bodyline Back-Huggar Thin Bucket Seat Back Cushion
The Bodyline Back-Huggar Thin Bucket Seat Back Cushion is designed for use by individuals in need of additional lower back support. The anatomical design provides back pain relief. The support works laterally and vertically providing spine support.
Bolster Thoracic Supports
The Bolster Thoracic Supports are straight lateral trunk supports designed for use in conjunction with the Otto Bock MOSS II seating systems (see separate entries). Two sizes of polyurethane foam pads ($20 to $18) slide over straight or 1 or 2 inch offset metal fixtures which mount to the sides of aluminum channel back frames ($29.25). They are adjustable vertically. They are available with strap kits which attach with velcro or buckle closures to the front of pads for anterior trunk support. CO
Brown Leatherette Deluxe Swivel Cushion
The Brown Leatherette Deluxe Swivel Cushion is a cushion designed for the car to aid individuals who need help getting out of the car and relief from sitting for long periods of time. Raises users seat and view by 1-1/2", and swivels 360 degrees to help users get in and out of the car with ease. Foam padded and lightweight, it also helps prevent hip and back strain caused by long hours of sitting. Use it in the driver or passenger seat. MATERIALS: Removable brown leatherette cover w/elasticized
Bts / Sts Custom Fixtures & Bending Tool
The BTS/STS Custom Fixtures and Bending Tool are a ball and rod fixture for STS lateral trunk support or slim line fixture for BTS lateral trunk support. They have an 18 inch rod which can be custom bent and cut. The bending tool may be clamped in a vice and used to shape the rods.
Bucketseat Lumbar Cushion
The Bucketseat Lumbar Cushion is a back support cushion designed to fit snugly against bucket seats to provide lumbar support and promote proper seating posture. Made of molded foam, the cushion has contoured edges and is available with or without a securement strap. DIMENSIONS: 15 x 13.5 inches. COLOR: Blue, burgundy, beige, or grey.
Buckles & Belts
Wheelchair seatbelts with 2 types of hook and loop closures, molded plastic Delrin buckle (operates by pinching both sides of buckle simultaneously), lever aircraft buckle, or push button aircraft buckle. Two piece or single continuous belts. Available sizes from 48 to 108 inches.
Burnett Body Supports
The Burnett Body Support is a seating support designed to provide postural support for children and adults with diagnoses associated with multiple sclerosis, spinal cord injury, cerebral palsy, stroke or dystonia.
Butterfly Strap (Models Bb01, Bb02, Bb03, Bb11, Bb12, Bb13, Bh01, Bh02, Bh03, Bh11, Bh12, Bh13)
The Butterfly Strap is a padded chest panel with vinyl upholstery designed for providing trunk support for seated individuals. It is available in buckle (BB-) and velcro (BH-) styles in sizes small, medium and large. The strap is available in black and gray.
Cam Belt With Grommets (Model Es-350)
The Cam Belt with Grommets, model ES-350, is a child belt restraint for pelvic stability. The two-piece belt is made of automotive seatbelt nylon and has a nylon buckle. The belt attaches with grommets to various therapeutic equipment and seating aids. The nuts, bolts, and washers required for installation are included. DIMENSIONS (LxW): 40 x 2 inches.
Cando Inflatable Wedge
The Cando Inflatable Wedge is designed for children with Attention Deficit-Hyperactivity Disorder and sensory processing disorder to activate their intrinsic trunk muscles to support the spine. The wedge shape encourages a seated posture with a forward pelvic position and the movement fits well in elementary school desks and other chairs. Improves balance, coordination, flexibility and strength. Can be inflated or deflated to adjust the firmness.
Carbon Series Back Support
The Carbon Series Back Support is a wheelchair back support designed for use by individuals with mobility disabilities or spinal cord injury. The unit consists of a carbon shell, cushion and cover. It has an active support contour of 2.5 inches. The unit is compatible with Fixed Elite, 2-Point Pro and Quick Release mounting systems. The fixed positioning unit clamps to 1-inch tubing; all other tubing sizes require spacers. The adjustable positioning unit clamps to 0.6- through 1-inch tubing, rou
Carrie Rover Stroller (Models 4642, 4643. 4644, & 4645)
The Carrie Rover Stroller is a seating system on a wheeled base designed to provide freedom and mobility while maintaining therapeutic support for children and small adults with physical disabilities. The removable seat is made of Tumble Forms modular cushions which are covered in a seamless, washable material that is impervious to body fluids and non-toxic. The anti-thrust seat stabilizes the pelvis while the seat back articulates 20 degrees to accommodate abnormal trunk tone. The seat may be u
Chair Base Plate
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted chair base plate for a child with multiple disabilities. The child is unable to sit on a chair without support and when she is at school,. she is either in her wheelchair or in a wood chair with a lap strap. Although the lap strap holds the child securely, the child can still rock her chair back and forth with a significant risk of toppling over. The child’s occupational therapist recommended that a base plate be fitted to
Chair Insert
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted chair insert for a child with global developmental delay and epilepsy. The child had outgrown his previous insert and a new version was required. The new insert has a plywood back set at a 10-degree recline, a plywood base and footrest, height-adjustable thoracic fins, and cushions made from fabric-covered, 25-millimeter foam. There are also a range of harness mounting points, and the child uses the chair with a waist harne
Chair Mate Adaptive Seating System
Seating system with ABS plastic solid base. Covered in vinyl upholstered foam. Drop hooks allow 9 different positions. As its highest, seat is level with seat rail and has 2 inches of tri-density foam. At its lowest, seat is 3 inches below seat rail. Terry cloth cover available. Lowest back height from seat 16 inches, the highest back height 4 inches above the push handles of standard adult wheelchair. Flat lateral supports adjustable both vertically and horizontally. Lateral supports available
Chair Support For Recliner
CUSTOM ADAPTATION PURPOSE: To provide support for an individual with Parkinson's disease who leans to the right when fatigued. A Henley Twin Electic Recliner was custom-made to the user's measurements. Once the chair was complete, it was modified by adding thoracic fins to maintain the body in an upright position. The fins were mounted on brackets spaced 300 millimeters apart on a steel tube frame. The right-hand bracket, the side on which the user primarily needed support, could be moved up an
Channel Armrest Fixture (Model 436F1)
The Channel Armrest Fixture, model 436F1, is a pivoting, elevating armrest designed to be attached to the arm of a wheelchair with a fitted clamp. The swivel configuration allows the armrest to turn on its horizontal and vertical axis for more comfortable positioning. It can also be used to mount and position hand control units for powered wheelchairs.
Checkerboard
Checkerboard is foam material made of high density foam cut to a checker board pattern for pressure relief. Sold in sheets.
Chest Strap & Chest Strap With Pads
Soft velcro 2-inch chest strap with side taps. Mounts to solid back or lateral trunk supports with D-rings or buckles. Machine washable. Smaller size available. Can also be ordered with 4 custom size pads to provide flexible surrounding torso support when mounted to solid back with D-rings or buckles. Pads are 1/2 inch medium density foam and 1/2 inch birch plywood and should not exceed 3 inches height.
Child Wheelchair Tray (Model 766C)
The child wheelchair tray fits all wheelchair sizes. The top is made of mar-resistant wood grain laminate and has a 1/2 inch rim. DIMENSIONS: 21 x 18 x 12.5 inches with a 7.5-inch cut out.
Chill Out Chair Rock'r
The Chill-Out Chair Rock'r is a specialized therapeutic seat that features a unique deep v design to provide additional stable support to those who need trunk alignment.
Chill Out Chair Roller
The Chill-Out Chair Roller is a specialized therapeutic seat that features a unique deep v design to provide additional stable support to those who need trunk alignment.
Clamp-- Positioning, Swivel Hold Down, Fixed Hold Down
These Clamps are seating hardware designed to be used in wheelchair seating systems. The Positioning Clamp has applications where clamping of the mounting hardware is fastened to the tubing of the wheelchair. It is most often used on the rear of the wheel base to position the chair initially and to keep the chair from shifting. The Swivel Clamp is a riveted one-piece design, used for securing the seat to the wheel base or wheelchair. By turning the swivel hold-down 90 degrees, complete seating d
Classroom/transport Mobility Base
The Classroom/Transport Mobility Base is a wheeled base for the Snug Seat 1 seating system (see separate entry). This trolley-style base is designed to place the child at preschool table height of about 18 inches to aid in peer interaction, communication, and feeding activities. Standard features include a polyester powder coat finish, safety lock, rear caster locks, and 4 swivel casters. DIMENSIONS (HxLxW): 5 x 18 x 15.5 inches. WEIGHT: 9 pounds. COLOR: Antique gray.
Clear Acryic Wheelchair Tray (Model H1202)
The Clear Acrylic Wheelchair Tray, model H1202, is a lapboard designed for use by individuals who use wheelchairs. Made of clear acrylic, this tray attaches to the wheelchair armrests, has a round torso cutout, and provides a large surface for eating, working, and other activities.
Clear Acrylic Wheelchair Tray (Model 5000)
The Clear Acrylic Wheelchair Tray, model 5000, is a lapboard designed for use with wheelchairs. The transparent acrylic is lightweight and the universal design fits all wheelchairs. The tray attaches with Velcro straps. DIMENSIONS: 23 x 19 x 1/4 inch.
Clear Acrylic Wheelchair Tray (Model 6662)
The Clear Acrylic Wheechair Tray, model 6662, is a lapboard designed for attachment to a wheelchair with Velcro straps. It is transparent, lightweight and has a universal design. DIMENSIONS (LxWxH): 23 x 19 x 1/4 inches. WEIGHT: 3 pounds.
Cloth Lap Tray.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Overcomes the difficulty of a person in a wheelchair to balance objects on the lap. Cloth tray with stiffened edges can be constructed to provide a flat surface on which to place articles. Stiffened edge serves to prevent things from slipping off the tray. Made of 1 and 1/8 yards of fabric or 1/2 yard each of two contrasting fabrics, velcro, and 1 and 1/8 yard rubber tubing or garden hose. COMMENTS: Simple pattern and instructions for construction are
Collapsible Lap Tray.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Wheelchair lapboard folds and stores on back of chair. Lightweight lapboard attaches to full length wheelchair arms. It folds in half and can be used as a short lapboard, or removes and stored easily on the back of the wheelchair. Includes picture. SKILLS REQUIRED: Woodworking AUTHOR: Bob Warren, UCP of Akron, 318 Water STreet, Akron, OH 330-376-6041. TITLE: Tools, Equipment and Machinery Adapted for the Vocational Education and Employment of Handicapp
Columbia Therapedic Positioning Seat (Model 2000)
The Columbia TheraPedic Positioning Seat, model 2000, is a car seat designed for use in the transport of children with physical and neurological disabilities affecting balance and the ability to sit upright. The seat can be used by children up to 5 feet tall, and may also be used as a wheelchair insert. The unit consists of a vacuum-formed ABS plastic shell with chromed steel side tubes, fire-retardant upholstery, a five-point nylon webbing safety harness, and a nylon webbing supplementary tethe
Comfort Company Acta-Back
The Comfort Company Acta-Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-back features three layer foam construction, including visco surface layer. The lightweight durable aluminum shell comes with head support holes and lateral hardware slots. Comfort company back has patented compass hardware that quickly installs to wheelchair and adjusts for depth, height, and angle while the user remains seated. Acta-back
Comfort Company Acta-Back Deep
The Comfort Company Acta-Back Deep is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-back deep has three layer foam construction including visco surface. It has lightweight durable aluminum shell that comes with head support holes and has patented moldable aluminum stays that conform and support back. The back provides pelvic and scapular relief. Its patented compass hardware quickly installs to wheelchair and easily a
Comfort Company Acta-Back LTS Back
The Comfort Company Acta-Back LTS Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-back LTS back is a lightweight durable aluminum shell that comes with head support pad holes and lateral trunk support hardware slots. Acta-back LTS has three layer foam construction, including Viscool surface layer and has patented moldable aluminum stays that conform and provides back support, pelvic and scapular relief. Acta-bac
Comfort Company Acta-Contour Back
The Comfort Company Acta-Contour Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort Company Acta-Contour Back is designed to provide lower thoracic relief and support. Comfort Company Acta-Contour back’s patented lightweight moldable aluminum shell stays conform and support the back and comes with head support holes. Comfort Company Acta-Contour Backrest has three layer foam construction, including comfortable Visco surface lay
Comfort Company Acta-Embrace Back
The Comfort Company Acta-Embrace Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-embrace back has aluminum stays on the backside of the two layer foam pad and can be molded to support lumbar, scoliosis, and kyphosis needs. Acta-embrace back has integrated trunk supports that are attached to a planar aluminum backrest shell and can be adjusted for angle, height, and up to a total of 3 inches of width to create a
Comfort Company Acta-Embrace LTS Back
The Comfort Company Acta-Embrace LTS Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-embrace LTS back has integrated trunk supports that are attached to a planar aluminum backrest shell and can be adjusted for angle, height, and up to a total of 3 inches of width to create a custom supportive shape. Acta-embrace back provides extreme stability, pelvic and scapular relief and years of durable use. Acta-embrace LT
Comfort Company Acta-Relief Back
The Comfort Company Acta-Relief Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-relief back has a thick visco surface layer that adds extra comfort and support by contouring to the user's body. Acta-relief back features flexible, adjustable straps that allow the product to offset the center of pressure and better remove pressure points from the spine and allows for a more aggressive molding to each individual pa
Comfort Company Acta-Relief LTS Back
The Comfort Company Acta-Relief LTS Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company acta-relief LTS back is designed to provide more aggressive molding to each individual's natural anatomy and support many seating positions ranging from upright seating to a severely rotated back. Acta-relief LTS back features flexible, adjustable straps that allow this product to offset the center of pressure and better remove pressu
Comfort Company Comfort Back
The Comfort Company Comfort Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company comfort back has a dual density, high resiliency foam that comfortably contours to user's anatomy. Comfort back is available with or without built-in lumbar support and coincides with existing wheelchair back. The back is easy to install. Comfort back support fits 16, 18, 20, 22 inches wheelchair size and has weight capacity of 450 pounds.
Comfort Company Contour Visco Back
The Comfort Company Contour Visco Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company contour visco back features visco surface layer that adds extra comfort and support by contouring to the user's body. Visco back has a dual density, high resiliency foam that comfortably contours to user's anatomy. Contour visco back is easy to install and coincides with existing wheelchair back. The back support fits 16, 18, 20, 22 inc
Comfort Company Elements Foam Wheelchair Back
The Comfort Company Elements Foam Wheelchair Back is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company element back is a general use wheelchair back that has 1inch of pressure relieving foam for a greater level of comfort and support than the standard wheelchair sling back. Element back features an innovative strapping system that can accommodate for kyphosis and provide lumbar support and the back tension is adjustable to fit
Comfort Company Incrediback Moldable
The Comfort Company Incrediback Moldable is designed for use by individuals with lower extremity, mobility disabilities and spinal cord injury. The Comfort company incrediback moldable back has patented moldable aluminum stays that conform to and support the user's back. The standard moldable back is best for the wheelchair user who needs the support and comfort that a normal sling back cannot provide. The incrediback is fully adjustable for angle and height, with 2 inches of depth adjustment. I
Comfortarm Armrest
The ComfortArm Armrest is an arm trough designed for use by individuals with spinal cord injury, neurological disabilities, and other mobility disabilities and upper extremity disabilities. Appropriate for individuals with elbow contractures, this unit features a deep arm well, full articulation, and solid mounting. Available for the right or left arm in standard or elevating models, the standard unit allows the arm trough to be elevated and articulated with a quick release lever, while the swin
Comfortline Series
The Comfortline Series are lapboards designed for attaching to wheelchairs. The trays have a rectangular work surface and rounded torso cutout and are fabricated of wood and covered with foam padding and finished with molded satin vinyl. These trays are available in two models: the tray alone or the tray with straps. SIZE: Both models are available in child and adult sizes. DIMENSIONS (WxD): Child-size trays are 20.5 x 18 inches with a 12 x 6 inches torso cutout; adult-size trays are 23.5 x 22 i
Comfy-Back Bacpac (Model 400)
Lumbar cushion which includes reusable hot or cold pack. Gel pack is microwave heated, or frozen and then inserted under fabric flap with Velcro closures. .
Comfy-Back I (Model 100)
Back support provides extra-firm lumbar support. Fabricated of high density foam. Half-rounded cushion attaches to any seat back with adjustable 3/4 inch non-roll elastic. 15 inches long by 3 inches wide by 5 inches high. Nylon covers have zip closure. Washable. Colors available.
Comfy-Back Ii (Model 200)
Back support with angled coccyx support. Adjustable. Vinyl hinge tilts spine upward and pulls half round lumbar cushion into lower back. Lumbar cushion is Velcro-backed. Attaches to any seat with adjustable 3/ 4 inch elastic. 15 inches long x 5 inches wide by 17 inches high. Nylon covers have zip closure. Washable. Fabricated of 100% polyurethane foam. Colors available.
Comfy-Back Iii (Model 300)
Seat and back support with half-rounded cushion attached to back and wedge-shaped square seat. 15 inches long by 15 inches wide by 17 inches high. Nylon covers have zip closure. Washable. Fabricated of 100% polyurethane foam. Colors available.
Comfy-Back Jr (Model 500)
Back support. Two half round cushions are hinged open for customized lower back support. One half is firm, other soft. Can close to form round cervical roll for back or neck. Fabricated of polyurethane foam. Nylon covers have zip closure. Washable. Attaches to any seat with adjustable 3/4 inch elastic. Dimensions: 12 inches long by 3 inches wide by 11 inches high. Has 6 inch diameter when closed. Colors available.
Complete Feet
Complete Feet is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and attaches to the chair with heavy-duty straps to help protect and control flaccid feet. The contoured leg troughs have foam in two densities to protect the ankles, reduce abrasions, and allign the legs. Rear cutouts reduce skin breakdown on the heels. DIMENSIONS (HxW): Available for 12 x 16,18,20, and 8 x 16,18,20 inch wheelchairs.
Complete Feet Single Foot
The Complete Feet Single Foot is a foot support designed for use by individuals who use wheelchairs. This foam-padded unit covers the footplates, extends to the calf, and clamps to the footplate to help protect and control a flaccid foot. The other foot remains free for foot propulsion of the wheelchair. The contoured leg trough has foam in two densities to protect the ankle, reduce abrasions, and align the leg. A rear cutout reduces skin breakdown on the heel. DIMENSIONS (HxLxW): 8-10 x 10 x 7.
Compu-Cush
The Compu-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, this cushion is specially designed for use while using a computer. Features include a wedge-shaped design to tilt the pelvis forward, a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable velour cover. DIMENSIONS: 13 x 16 inches. COLOR: The cover is black. WARRANTY: One-year lim
Constructa Foam
Constructa Foam is lightweight, rigid, closed-cell polyethylene based foam material designed to be simultaneously firm, supportive, and resilient. Suggested uses are customized positioning, seating, and support systems. The foam is generally covered because its surface is somewhat abrasive to the touch. DENSITY: Medium is 2, Firm is 6, X-Firm is 9, and Super Constructa is 2 pounds per cubic foot. DIMENSIONS: Constructa Foam is available in cylinders (2, 4, or 6-inch diameter x 36 inches) and sla
Contour Back Cushion
The Contour Back Cushion is a back support cushion designed for use by individuals with arthritis. Its orthopedic contour shape allows for a correct sitting position, minimizing lower back discomfort. The molded foam rubber cushion comes with a removable cover. DIMENSIONS (HxDxW): 14.25 x 4.5 x 13 inches.
Contour Freedom Back Support Cushion
The Contour Freedom Back Support Cushion is back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. This cushion is designed to fit the curve of the back and features a full-length back support with 10 zones for alignment and support in any chair. The tapered top supports upper back and shoulder blades to allow upper body movement and the contoured bottom eliminates pressure from tailbone and hips. A
Contour Support
The Contour Support is designed for use by individuals with lumbar injuries or disabilities. Made of molded foam, this support is intended for use with firmer seating such as office chairs or car seats. The roll includes a washable cotton cover with a strap with a quick-release buckle. DIMENSIONS: 18 x 6 x 2.5 inches.
Contoured Back (Model Cb2000)
The Contoured Back, model CB2000, is a curved back insert for wheelchairs designed to position individuals with severe physical disabilities when seated in a wheelchair. The Back Support Panel is made of high-strength aluminum alloy laminated with a black textured vinyl and edged with a continuous neoprene edging which is formed for a contoured fit. All mounting holes are a stardard one-inch between centers. Mounting hardware allows for a variety of back angle adjustments with positive locking.
Contoured Headrest Assembly
The Contoured Headrest Assembly is designed for individuals requiring medial/lateral, posterior and rotary support. The ABS plastic construction allows for customized molding with a heat gun. The mounting hardware (included) allows height and forward/backward adjustment with a slide bracket and knob. The headrestt is also available upholstered. SIZE: Large (model ASCH-LG) or small (model ASCH-SM).
Convaid Metro Mobile Positioning System Stroller
The Convaid Metro Mobile Positioning System Stroller is a lightweight, comfortable stroller for users who require less involved positioning. The unique design features contoured upholstery and a 30-degree fixed tilt backrest for improved positional comfort, while a self-tensioning system helps maintain proper neutral alignment for ideal support. Lightweight frame is ultra-durable while also being easily foldable for simple transport and maneuverability that helps reduce the strain on caregivers.
Cool Mesh Back Support System
The Cool Mesh Back Support System is a lumbar support designed for use by individuals with lower extremity disabilities, back pain, or those who have difficulty sitting for long periods. Designed to help promote good posture and lumbar support, this ergonomic back support can be used at home, work, or in a car. The system is made of mesh fabric that allows cool air flow comfort and attaches to the seat with an elastic strap. The strap can be adjusted upward and downward.
Cosmetic Chest Strap.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Shirts are modified to hide chest strap in wheelchair. Shirts and sweaters have small slits made at the appropriate height on each side. The straps are inserted through the shirt and secured in the correct position. The shirt is then buttoned over the chest strap to provide a better appearance in the wheelchair. SKILLS REQUIRED: Sewing. AUTHOR: TITLE: Clinical Forum. REF: Newsletter: Volume 1, No 1, Fortress Scientific, 61 Miami St, Buffalo, NY 14204.
Cozy Me
Cozy Me is a seat and back support designed to cushion and protect children riding in grocery cart seats. The soft, cushioned pad fits in the cart seat without ties and protects the child's seat and back and includes flaps to protect the legs. The machine-washable pad, which doubles as a changing pad, helps prevent sliding. COLOR: Multi-color vegetable print.
Cozy Seat
Modular seating system. Designed to support children one to three years who require special seating for support and positioning. Consists of a one piece seat and back shell made from ABS plastic with a cover and a metal frame. Can be reclined. Accessories: abduction pommel, head rest, flexible trunk bolsters, neck rest, tray, seat belt, chest belt and toy bar. Optional: back spacer to adjust seat length. Can be placed in strollers, wheelchairs, high chairs, toboggans.
Cpsc Foam In Place Seating Kit (Model Fp O1)
Casting frame and kit, model FP 01, allow custom molding of seat and/or back cushions on site. Foam is 2 part liquid Sunmate in soft, medium, or firm density. Casted cushions can be finished by trimming to fit and installing in modular plastic shells with lycra cover. Or cushions can be sent back to CPSC for vinyl covering and installation in shell. Shells available in 12, 14, 16, and 18 inch widths, any seat depth or back height. Full insert shell available with 90, 105, 120, 135 degree seat to
Cpsc Standard Back (Models Sb-01 Thru Sb-06)
Seating insert. The standard back has integral waist bolsters that contribute to central positioning of the lower spine. Chest bolsters may be added easily without modifying the upholstery.
Cpsc Standard Pommel Seat (Models Sp-01 Thru Sp-06)
Wheelchair seat insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Has a 15 degree wedged seat, a thigh shelf and an integral abduction pommel to provide good positioning and weight distribution. Standard cushion is removable and vinyl covered. Options include polyfoam or viscofoam cushion, lateral padding, reinforced side panels. 7 sizes: 11 inches wide by 13 inches deep, 12 by 14 inches, 13 by 17 1/2 inches, 14 by 18 inches, 15 by 20 1/ 2 inches, 16 by 20
Cpsc Transfer Seat (Models Ts-02, Ts-04, & Ts-06)
Wheelchair insert with integral pelvic bolsters and tapered side sections for pelvic centralization. Seat has 7 slope and a flat front profile. Unit clips directly over the wheelchair seat frame tubes, it seats the persons lower than normal for easier transfers, while still providing appropriate positioning.
Cpsc Wheelchair Trays (Models Lt 01, Lt 03, Lt 11, & Lt 13)
Wheelchair lapboards, ABS plastic. Safety rim around the perimeter keeps articles from sliding off. Inside edge may be modified as required. The tray attaches to any size wheelchair with brackets.
Curved Backs (Mod I)
Solid back insert modification for Freedom Design solid backs. Pressed wood with foam and upholstery. Adapts to any style hardware.
Custom Adapted Footstool
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted footstool for an adult with cerebral palsy. This individual worked as a disability advocate and often spends most of her eight-hour work day at her desk. She had difficulty with her feet resting on the floor while sitting and would experience swelling and muscle spasms, particularly when she was tired. Commercially available footstools were ill suited. The custom adapted stool was created using lightweight plywood to constr
Custom Recliner Trunk Controls Series 300
Custom Recliner Trunk Controls Series 300 are accessories designed for support of trunk in cases of poor lateral trunk control or scoliosis. The Trunk Control Series includes: three Scoliosis Systems: Regular and Hinged - steel reinforced with self skinning foam, washable fleece, adjustable vertically, in/out, and laterally, can be custom-made, and Bolt-on Chip - same features as Regular and Hinged system, but includes hardware attached to outside of bucket back, chest strap holds pads to indivi
D-Shaped Support
The D-Shaped Support is designed for use by individuals with lumbar injuries or disabilities. Intended for use where forward leaning or movement occurs, this roll is firmer than the regular Bakrol (see entry). The roll includes a washable cotton cover with a strap and a quick-release buckle. DIMENSIONS: 12 x 4 inches.
Danmar Anterior Head Support
Danmar Anterior Head Support is a head supporting collar design to help individuals with reduced neck strength and reduced ability to hold up their heads to do so by providing firm, but gentle, lifting of the chin and lateral support of the head. There is a padded roll around the rear strap for a comfortable finish. Soft cloth covers are included over the vinyl-coated foam. This headrest is an important alternative to help meet the positioning needs of those who require some supplemental support
Danmar Full Coverage Helmet
Danmar Full Coverage Helmet is intended for individuals who are at risk of frequently striking surfaces with their head and resulting head injuries, the helmet is meant to provide greater impact resistance and designed to provide extra coverage to the temples, cheeks, ears and nape of the neck. This lightweight helmet is made from shock-absorbent foam that is fully ventilated. It’s coated in vinyl, so it’s easy to clean using just soap and water. With no hardware in the foam, there’s no danger o
Danmar Hensinger Head Support with High Back
Danmar Hensinger Head Support designed for individuals who cannot support or hold up their own necks or have low strength in their neck, the product features a High Back which can help maintain mid-line head positioning. Proper head positioning facilitates improved breathing, swallowing, and simplified feeding. It also aids in social interaction and awareness during classroom activities. The Hensinger is built with strong yet pliable reinforcement material around the outside of the support. A si
Danmar Side Opening Head Support
Danmar Side Opening Head Support is a head supporting collar design to help individuals with reduced neck strength and reduced ability to hold up their heads by providing firm but gentle lifting of the chin, and lateral and occipital support of the head. The closed cell vinyl-coated foam is reinforced in front and back for added strength. Secure, soft, and very supportive, this head support opens on the side with a quick release buckle closure for easy on/off. The Side Opening Head Support can b
Danmar Swirl Collar
Danmar Swirl Collar offers minor to moderate head support. Can be used alone or with any seating system and by individuals who are ambulatory. This Swirl of soft foam wraps around the neck and has a hook and loop adjustment at the back that makes fitting a breeze. Used for minor to moderate head support, this collar encourages easy movement from side to side. When properly fitted, the Swirl should make contact with the chin and jaw line.
Deep U Headrest (Model Duhr100)
The Deep U Headrest, model DUHR100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who need to keep their heads positioned upright and centered. DIMENSIONS: 11 x 5 inches.
Deluxe Lateral Arm Support (Model 6320)
The Deluxe Lateral Arm Support, model 6320, is a trunk support designed for use by wheelchair users who lean laterally. This padded trough has an ambidextrous design, enabling it to fit either wheelchair armrest. The contoured trough supports the arm and encourages arm use and rehabilitation. Optional self-releasing straps may be used to stabilize arm position. This support has a soft, water-repellent, wipe-clean vinyl cover.
Deluxe Reversible Extenda Arm (Model 31094)
The Deluxe Reversible Extenda Arm, Model 31094, is lapboard mounting hardware designed for use with wheelchairs. The tubulat steel telescoping arm mounts under the armrest on standard padded or desk-length wheelchair arms to provide up to 8.5 inches of additional support for trays in front of the armrest. The device can also br retracted under the armrest overhang. This deluxe heavy duty version is reversible for use on the right or left side. WARRANTY: The manufacturer warrants this product to
Deluxe Wheelchair Tray (Models H1200 & H1201)
The Deluxe Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. The wooden tray features extra-wide, screwed-in straps for attaching the tray to the wheelchair armrests, a rounded torso cutout, and a raised lip to prevent items from falling off. DIMENSIONS (WxD): 25 x 22 inches. COLOR: Model H1200 is butternut and model H1201 is rosewood.
Desk Arm / Large Lap Hugger (Models 6515L, & 6517)
The Desk Arm/LargeLap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl and fits between the wheelchair user and the wheelchair frame and also provides arm support. Notches fit around the armrest posts. DIMENSIONS: Model 6517 fits wheelchairs 18 to 20 inches wide with desk-length arms and model 6515L fits wheelchairs 20 to 24 inches wide.
Desk-Length Armrest (Model Ar20) And Full-Length Armrest (Ar24)
The Desk-Length Armrest (model AR20) and Full-Length Armrest (AR24) are single post armrests that come with mounting hardware and are designed for use on seating systems. They can be attached to aluminum pans to be non-removeable, removeable with fixed height, or height- adjustable with fixed lower limit. Desk-Length Armrests are 9 inches long and Full-Length are 14 inches long.
Direct Mount Clamp (Model 247-Dm100)
The Direct Mount Clamp, model 247-DM100, is lapboard mounting hardware designed specifically for attaching the MYDESC desktop lapboards (see separate entries) to wheelchairs without armrests or without removable armrests. This metal clamp block has a tightening knob for use with tube framing from 0.75 to 1.25 inches in diameter. The device can be mounted either vertically or horizontally, and also features an 0.83-inch cylinder slot to mount the lapboard, or umbrellas, directly onto the wheelcha
Doodlebug Insert (Model 1065)
The Doodlebug Insert, model 1065, is a back support cushion designed for use with Kay Kinder Chairs (see separate entry, as well as other positioning chairs and high chairs. This terry cloth covered foam support also reduces the width and depth of the chair, enabling it to be used by smaller children. The cover can be unzipped and remove for washing. COLOR: Red or light blue.
Drop Base
The Drop Base is a ABS plastic solid seat panel with cutouts for wheelchair cross braces designed to allow the mounting of custom or commercial seat cushions level with or below seat rail level. The panel fits between the seat rails, with 1- and 2-inch drop hooks to fit 7/8-inch or 1-inch rails. DIMENSIONS: Sized to fit 16 and 18 inch widths.
Drop Brackets, Drop Hooks, & L Brackets
The Drop Brackets and Hooks are stainless steel drop hooks designed for mounting seats and backs into tubular frame bases. The "L" brackets allow angle adjustment with 1, 3, 5, or 7 holes. DIMENSIONS: 1-, 2-, and 3-inch deep Drop Hooks are available available for 7/8 or 1 inch diameter tubing, with spacers for 1/2 inch increments.
Drop Seat And Cushions (Models 6540, 654020, 6541, & 6519)
The Drop Seat and Cushions is a solid seat insert and a gel and foam or foam seat cushion designed to lower the height of wheelchair seats to enable self-propulsion using the feet or to enable the user to reach the footplates to stop sliding. This seat can be used with standard or hemi chairs and lowers the center of gravity, making the chair less likely to tip. This seat attaches to the frame in place of the standard seat without the use of tools. A drop seat gel and foam cushion to reduce the
Drop Seat Base And Hardware
The Drop Seat Base ($42.50) and Hardware ($169) are a combination solid seat insert and adjustable hook hardware designed to fit 7/8 or 1 inch diameter wheelchair seat rails. Gravity hook assemblies allow automatic locking of the seat base onto the frame. It requires cutting of the plate to accommodate wheelchair cross-frame tubes, and drilling to mount hardware in appropriate locations.
Drop Seats (Models 31649, 31651, 31655, & 31656)
Drop Seats are solid seat inserts are designed for use by individuals who use wheelchairs. Made of seven-ply birch, these seats have pre-drilled mounting holes and include T-nuts. Cutout slots fit around chair frame crossmembers. DIMENSIONS: Model 31649 fits chairs with 14-inch seats and is 14 x 11 inches; model 31651 fits chairs with 16-inch seats and is 15 x 13 inches; model 31655 fits chairs with 18-inch seats and is 17 x 15 inches; and model 31656 fits chairs with 20-inch seats and is 19 x 1
Drop-Stop Footrest Extender /legrest Pad(Series 7032)
Drop-Stop is a footrest extender designed to prevent foot drop in people who use wheelchairs. The modular extenders create a platform which enables footrests on footrests and geri chairs to be raised from one to four inches to provide improved positioning, sliding control, and weight distribution. The included padded legrest cushion prevents the user's feet from sliding off the footrests. DIMENSIONS: Available in 16- and 18-inch widths and in a choice of one, two, three, or four inches high.
Dynafoam Abduction Wedge
The Dynafoam Abduction Wedge is a knee separator designed to prevent adduction contractures by maintaining four inches of knee separation. This sculptured wedge is made of high density foam with a machine washable, terry cloth cover and Velcro straps to maintain position. SIZES: Adult (no. 8481, $22.35) and Pediatric (no. 8488, $41.55) with 3 inches of abduction. COLOR: Cover is blue.
Dynafoam Knee Spreader (Models 2036 & 2047)
The Dynafoam Knee Spreader ##2036 and ##2047 is a knee separator and hip abduction splint designed to abduct the hips and to separate the knees while in sitting position. The device is made of high resiliency Dynafoam covered in a polyester slip cover that is removable for washing. Dynafoam offers therapeutic, dynamic qualities when compressed. The abductor is secured by a 4-inch wide Polynap strap with Velcro fasteners that wraps around the thighs. SIZES: Adult (##2036) and Pediatric (##2047).
Dynamic Articulating Footrest
The Dynamic Articulating Footrest is a footrest extender designed for use by people with lower extremity or mobility disabilities or spinal cord injury and others who use a manual or power wheelchair. This footrest extender allows for both extension and rotation of the footplates to mimic the motion of the knee joint and leg. It also allows for three different ranges of articulation (knee rotation): 0 degree (linear motion only), 30 degrees and 50 degrees. A shield is used to prevent pinch point
Dynamic Forehead Strap System (Model Dfs-1)
The Dynamic Forehead Strap System is a headrest accessory designed to support the head for individuals who have difficulty maintaining their head in an upright position. It is meant for use with the S.O.F.T. headrest system (see separate entry). The system consists of pulleys that allow the forehead band to move with the user, providing greater freedom of movement. The strap is designed to float about freely with the user. The straps are available in two different styles. The first features a te
Dyno Transit Folding 3-Wheeler Stroller
The Dyno Transit Folding 3-Wheeler Stroller is a three-wheeled, all-terrain vehicle versatile enough for the classroom, park and house. The durable stroller is designed to be lightweight to make traveling, especially on public transit, easier and less cumbersome. The lightweight structure along with the compact size of the stroller once folded makes transporting hassle-free.
E Z Back System (Models Ezl2001, Ezl2002, & Ezl2003)
The E Z Back System, models EZL2001, EZL2002, and EZL2003, is a back support that can be mounted on sling back wheelchairs, commodes, driver or automobile passenger seats, or chairs. The system includes two laterals, a Velcro back, and a front panel with lumbar support. The system's lateral supports are independent of one another, so they are interchangeable from side to side. The system's lumbar support is also adjustable, so the system can give the user needed lateral or pelvic support. OPTION
E-Z-Lock Tray Clamp (Model 31096)
The E-Z-Lock Tray Clamp, Model 31096, is lapboard mounting hardware designed to secure lapboards and trays to wheelchairs. This clamp is designed to attach any tray to any wheelchair arm using a simple locking motion. OPTION: An attaching hardware kit for securing the clamp to the tray is available separately ($10.50). WARRANTY: the manufacturer warrants this product against defects in workmanship and materials for 90 days from the date of purchase.
Easyriser (Model Pl24Aj)
The EasyRiser, model PL24AJ, is a foot support designed to prevent pain in the back shoulders or arms for individuals whose workstation is standing at a tall counter. There is an anti-fatigue mat that provides cushioned comfort for the feet and legs and the sturdy steel frame and legs are built for durability. The platform adjusts to put the user at the right height to reduce fatigue and back strain, and the rubber feet hold the platform in position. The foot support is large enough to move arou
Econo Flip Plevic Stabilizer (Model Ee 3E)
Abductor with a bracket that easily flips down to allow easier transfers. Bracket is a push lever and drops from the front. Always returns to the original position. Adjustable bracket. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 inches wide in the front and two inches wide at the rear, Medium 7.5 inches long by 4 inches high by 4 inches wide at front and 2 inches wide at rear, Large 9 inches long by 4.5 inch
Economy Molded Lap Tray (Model A70711)
The Molded Lap Tray, model A70711, is a lapboard designed for use by individuals with mobility or lower extremity disabilities who use wheelchairs. The lap tray is designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray fits standard and desk arm wheelchairs and includes a cut-out area to accommodate the torso. Other features include a molded recess area for holding a cup or glass. OPTIONAL: A Comfort Pad (see separate
Economy Wheelchair Belt (Model Mdt829110C)
The Economy Wheelchair Belt, model MDT829110C, is a wheelchair seatbelt designed for use by individuals with mobility disabilities or spinal cord injury. This seatbelt restraint helps the wheelchair user to remain upright in the chair without sliding. This belt encircles the user and crosses in back. The belt is made of washable nylon and is latex-free. SIZES: One size fits all.
Econotray Series
The EconoTray Series are lapboards designed for use on wheelchairs. Fabricated of tempered hardboard with a woodgrain vinyl top, the trays are available in five models: the tray only, tray with 3-piece wood rim, tray with straps, tray with rim and straps, and tray with straps, pads, and a back strap. The Juvenile tray has an oblong worksurface, while the other models have a square worksurface. SIZE: The tray with straps, pad, and backstrap is available only in an adult size. The other models com
Elevated-Arm Lateral Support (Models 706020 & 706021)
The Elevated-Arm Lateral Support is a combination lateral trunk support and elevating armrest designed for use by individuals who use wheelchairs or geri chairs. This support, which comes with a launderable synthetic sheepskin cover, helps reduce leaning to one side while permitting the arm to be elevated to control edema. Model 706020 is a right-handed model and model 706021 is a left-handed model. DIMENSIONS: Both models are 12.75 inches high at the lowest point.
eMove5-LCR (S & D Ranges)
The eMove5-LCR (S & D Ranges) is a suite of powered chairs designed for people with severe muscle weakness or partial paralysis. The chairs come with a range of features, including:
Endoflex Back
Contoured back with internal metal frame. Mounts in wheelchair frame with back hooks with nylon straps and buckles. Back height and back angle adjustable. Mid-back can flex or be fixed in one position. Vinyl or fabric. .
Enduroline E-Z Lock Quik-Fit Trays (Models 33003P, 33004P, 33005P, 33020P, 33003, 33004, 33005, & 33020)
The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. These trays are made of melamine-impregnated fiberboard. Models 33003P, 33004P, 33005P, and 33020P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide)
Enduroline Plus Trays (Series 31200)
The Enduroline Plus Trays are lap trays designed for use with wheelchairs. These trays are made of melamine-impregnated fiberboard. These moisture-resistant trays can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a PVC rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide),
Enduroline Series
The Enduroline Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of Melamine-impregnated fiber board with a woodgrain vinyl top, and are available in tray only, tray with routed stop groove, tray with anodized aluminum rim, tray with groove and straps, and tray with rim and straps models. All models have a rectangular work surface. SIZES: All models are available in child, adult, and extra-wide sizes. DIMENSIONS (WxD): Child-size models are 20.5 x 18 inches w
Enduroline Top Drop Quik-Fit Trays (Models 33007P, 33009P, 33011P, 33019P, 33007, 33009, 33011, & 33019)
The Enduroline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The Enduroline Trays are made of melamine-impregnated fiberboard. Models 33007P, 33009P, 33013P, a
Enduroline Top Drop Quik-Fit Trays With Control Cutouts (Models 33037, 33038, 33039, 33040, 33041, 3342, 33043, 33044, 33045, 33046, 33047 & 33048)
The Enduroline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout
EquaGel Wheelchair Cushion - Protector Cushion
The EquaGel® Wheelchair Cushion - Protector Cushion is a contoured cushion designed for individuals with mobility disabilities and lower extremity disabilities who use wheelchairs. Typically used in rehab centers and other long-term care facilities, the EquaGel® Protector Cushion has a 0.75-inch pelvic contour that allows for more even weight distribution and positioning to aid in the prevention and treatment of pressure sores. The cushion features a fluid-resistant, vapor-permeable and flame-re
Ethafoam
Ethafoam is a polyethylene foam used in the underlayment of contour in seating. Foam sheets are sold 3 per case. DIMENSIONS: 2 x 24 x 3 feet.
Euroflex 700 Abc
The Euroflex ABC is designed for children with disabilities to maintain a good posture and increase their mobility.
Euroflex 700 Abc
The Euroflex ABC is designed for children with disabilities to maintain a good posture and increase their mobility.
Euroflex 700 Abc
The Euroflex ABC is designed for children with disabilities to maintain a good posture and increase their mobility.
Euroflex Clinic Chair
The Euroflex Clinic is an assistive clinical chair, designed for commercial use within medical establishments. Electric powered height adjustment means that clinicians no longer have to bend and stoop whilst carrying out medical procedures. Adjustments can be made with the patient in site allowing for faster patient interaction. Because the height of the seat is so easily adjusted, practitioners will be more inclined to raise the patient rather than leaning over in uncomfortable stressful positi
Evoflex Pelvic Stabilizer
The Evoflex Pelvic Stabilizer is a wheelchair seat belt designed for use by individuals with lower extremity or mobility disabilities, spinal cord injury and others who use wheelchairs. The Evoflex has two parts that attach to opposing sides of a wheelchair's seat. When the user is seated in the wheelchair, the two parts attach using a push button seatbelt fastener or a Rehab Latch (available only for the medium and large sizes) to secure the user in the seat. The Evoflex's parts are semi-rigid
Evolution Back
Evolution Back is a wheelchair back support system designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. The system is adjustable to accommodate growth and its "slide and snap" hardware is operable with one hand. It has an oversized self-inflating cushion for immersion of bony prominences, and is designed to work with lateral supports, hip belts, and hip guides. The system includes hardware with one inch of lateral a
Evolution Back Deep
Evolution Back Deep is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. It provides full posterior support and up to seven inches of lateral support. The seat can be adjusted in depth plus or minus three inches (up to 17.5 degrees of recline), and can be adjusted laterally plus or minus one inch at four points to accommodate growth or disproportionate body types. The system includes a PSIS
Expandable Tray
The Expandable Tray is a wheelchair lap tray designed for use by individuals who use wheelchairs. The wooden surface provides a large surface support for elbows and forearms, enabling better trunk support. Available with or without mounting clamps, the tray can be used on manual or powered chairs or on standing positioners, and adjusts to various widths. When not expanded, the tray fits through doorways and aisles. SIZES: Medium or large. DIMENSIONS: Each side extension adds 4.5 inches to the wi
Extension Headrest (Model 72)
The Extension Headrest, model 72, is designed for use with wheelchairs with push handles. The unit attaches to the wheelchair push handles with bracckets (included) to extend the back upholstery to form the headrest extension. DIMENSIONS: Adds 18 inches to the wheelchair back height.
Ez 2 Rest
The EZ 2 Rest pillow is a lumbar support pillow designed for use in office or car. Helps support spine and maintain good posture while seated. Includes a 4"x8" gel pack. Warm it in the microwave or chill it in the freezer then slip it in the pillow's pocket. Hot or cold therapy can help ease tension, reduce inflammation and relax muscles. Adjustable elastic strap fits around most any chair.
F.A.S.T. Fitness Assessment Success Trainer
The F.A.S.T. Fitness Assessment Success Trainer is a compact, portable body weight training station designed for those individuals ages 6 and up with balance disabilities to exercise on. It is good for adaptive Physical Education, therapy, fitness assessments, fitness stations and training. Ten different station configurations. Impact tested for up to 350-pound users. No assembly required.
Fastback
The Fastback is a back support cushion designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury who use wheelchairs. This air and foam flotation cushion is comprised of three densities of foam, positioned according to density to provide mild lateral support, scapular contour, and vertebral comfort and pressure relief. A valve allows the user to release more air for greater envelopment and stability. Other features include a PSIS block for l
Feeder Board Attachment.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Attachment for a wheelchair laptray, used to stabilize dishes and glasses for a user who lacks coordination. The feeder board clamps on top of a regular laptray with medium size C clamps. The dishes, cups and glasses the person uses fit into cutout holes in the board. Topview and sideview diagrams included. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Insti
Fellowes Compact Foot Rocker
Fellowes® Compact Foot Rocker is foot support designed for use by individuals with mobility disabilities, lower back pain or poor circulation. This ergonomic foot rests' rocking motions helps to improve circulation and reduce fatigue. The compact design suits areas with restricted work space. Flip product over to adjust height - range is 2-3/4" to 4”.
Figure-8 Clamp (Models 32310 & 32310B)
The Figure-8 Clamp is a seating hardware and a mounting clamp for accessories designed for use with wheelchairs. The two-part clamp is used to attach controls, accessories, and other devices to wheelchairs. One side of the clamp accommodates .75-inch tubing and the other side accommodates 7/8 inch tubing. Deep-set cap screws are used to tighten clamp around tubing. Set screws can provide additional mounting stability. COLOR: Model 32310B comes in black. WARRANTY: The manufacturer warrants this p
FitBALL® Wedge
The FitBALL® Wedge is designed for children with Attention Deficit-Hyperactivity Disorder and sensory processing disorder to activate their intrinsic trunk muscles to support the spine. The wedge shape encourages proper posture and alignment while sitting at a desk or table.
Fixed Arm Troughs (Models 31339R, 31339L, 32339R, & 32339L)
The Fixed Arm Troughs are designed for use by individuals who use wheelchairs and have upper extremity disabilities. Available for the right or left arm, these troughs are made of heavy-duty plastic and are equipped with brackets that slide over the existing armpads. Models 31339R and 31339L are padded with Ensolite and models 32339R and 32339L are padded with imitation lambskin. COLOR: The troughs and the Ensolite padding are black. The imitation lambskin padding is natural.
Fixed Drop Lock, Swing-Away Drop Lock, & Drop Stop
The Fixed and Swing-Away Drop Locks are stainless steel hardware designed for stabilizing seats and backs mounted on tubular frames with drop hooks (see separate entry). The locks will fit 7/8 and 1 inch diameter tubing. Three styles are available: the Drop Stop with no tab, Swing-away Drop Lock with pivoting tab, and Drop Lock tab with fixed tab.
Fixed-Drop Hardware Kits (Models 32617H, 32618H, 32542H, 32603H, 32604H & 32543H)
Fixed-Drop Hardware Kits are seating hardware general designed to attach drop seats to wheelchairs. The kits include four drop hooks, eight washers, and eight socket head screws. DIMENSIONS: Models 32617 and 32603 create a one-inch drop. Models 32618H and 32604H create a two-inch drop. Models 32542H and 32543H create a three-inch drop. Models 32617H, 32618H, and 32542H fit chairs with 7/8-inch tubes. The other models fit chairs with one-inch tubes.
Flat Foot Rest With Heel Straps
One pair of custom size slotted Kydex foot rest plates with mounting hardware and velcro heel straps. Mount to existing wheelchair footplates to increase foot placement area. Slotted for forward and back adjustment on footplate.
Flat Top Lateral Roll Armrest
The Flat Top Lateral Roll Armrest is an add-on armrest designed for use by individuals who use wheelchairs. This armrest fits over the existing armrest and the wide foam top provides comfort for the arm while discouraging lateral leaning. The design prevents spinning of the support around the armrest and prevents shoulder elevation. A low-profile model fits hemi wheelchairs and those that have less than three inches of clearance between the top of the finger guard and the bottom of the armrest.
Flip Abductor (Model Ab20)
The Flip Abductor (model AB20) is a knee separator designed for seating systems and wheelchairs. It is a lever release flip-down abductor with an adjustable height of 1 to 4 inches. An Abductor Pad (model AB50, $60) can be ordered separately. The Abductor is 3 inches by 5 inches by 3 inches, and comes in black only.
Flip Away Half Lap Tray (A7079, A70710, A70712 & A70713)
The Flip Away Half Lap Trays, models A707-9, A70710, A70712 and A70713, are lapboards designed for use by individuals who use wheelchairs. The easy-to-clean plastic trays secure on either the right or left side of a full-length or desk-style upholstered wheelchair arm. These trays offer comfortable support and lift up and out of the way during patient transfers or wheelchair storage. DIMENSIONS (WxD): 13 x 21 inches with a one-inch molded rim and 3.5 inch diameter recessed area for cup or glas
Flip Down Kit With Abductor Pad (Models 31468S, 31468M, & 31468L)
The Flip Down Kit With Abductor Pad is seating hardware general and an abductor pad designed to aid in positioning individuals who use wheelchairs. This kit includes an abductor pad, one four-inch coated steel tapered L-bracket, one 2.75-inch coated steel slotted L-bracket, one 2.75-inch coated steel extrender, one anodized aluminum hinge with push-button release, and mounting hardware. The Abductor Pad is made of textured urethane self-skinning foam and come with 10-32 T-nuts embedded in all m
Flip-Up Armrest
The Flip-Up Armrest is an elevating armrest designed to be attached to 7/8 inch tubing back uprights or to a back insert. The armrests have adjustability in height and angle and swing up for transfers. The armrests do not include pads.
Foam Cushion Wedge And Flipdown Hardware
Abductor pad available in 2 sizes: 3 1/2 inches wide by 3 inches high by 5 inches deep, and 2 inches wide by 3 inches high by 3 1/2 inches deep. Mounts to underside of solid seat with flipdown or slide-out hardware to allow transfers.
Foot Bracket Platforms
Several styles of platforms mount to wheelchair footplates for foot positioning. Complete assembly includes one pair of bent slotted plastic platforms, two pairs of plastic side plates which mount to footplate, one pair of heel plates or stops, and one pair of velcro foot straps. Adjustable in height, depth, and angle. Available in small (3 inches wide) and medium (4 inches wide) sizes. May be ordered as complete assemblies or individual replacement parts.
Foot Hugger (Models 6351, 6352, 6353, & 6354)
The Foot Hugger is a legrest panel designed to prevent the wheelchair user's feet from sliding off the foot plates. This foam-cushioned panel is covered in wipe-clean vinyl. This unit protects the user's legs and includes an attached extender to raise the height of the foot plates. DIMENSIONS: All models fit 18-inch wide chairs. Model 6351 is one inch high, model 6352 is two inches high, model 6353 is three inches high, and model 6354 is four inches high.
Foot Machine
The Foot Machine is a foot support designed for use by individuals with mobility disabilities, lower back pain, or poor circulation. This ergonomic foot machine actss as a footrest to provide support for the legs and relieve pressure on the lower back. Features include ball bearing rollers that encourages rocking of the feet in the same way a rocking chair encourages motion, nylon wheels, a non-skid surface, and a powder-coated steel frame with rubber rests. The non-skid surface allows the foot
Foot Rest Boxes.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Boxes to attach to standard wheelchair footplates to maintain position of feet. Design for making wooden boxes to maintain child's feet on wheelchair footplates. Includes materials list and diagrams. SKILLS REQUIRED: Woodworking. AUTHOR: Caston, D. TITLE: Easy to Make Aids for Your Handicapped Child REF: Book: Human Horizons Series, p 126. Also available from Prentice- Hall, Englewood Cliffs, NJ. NARIC CALL NUMBER: R1798. 1981.
Foot Support For Wheelchair
CUSTOM ADAPTATION PURPOSE: To enable an individual with a fused knee to have leg support in a wheelchair without creating pressure beyond the ankle. This device replicates a home footstool with the length reduced so only the ankle comes in contact with it. The unit attaches to the existing front rigging of the wheelchair and can be removed when not in use. TITLE: Wheeling Easy. JOURNAL: TAD Journal. REF: Vol. 12 no. 1, Autumn 2001: p. 16. PAGES (including cover): 2 2001.
Footboard And Brackets
One-piece ABS plastic footboard ($64). 3 sizes, 10 to 14 inches wide by 6 to 9 inches deep. Brackets ($47) attach footboard to bottom of solid seat insert. 2 size ranges, 6 to 9 inches long and 9 to 12 inches long.
Footrest Platform Tops And Bottoms
Top and bottom sections allow mounting of one-piece footplates to aluminum pans or other rigid seat panels. Removeable. Fixed or adjustable knee and ankle angles. X-style foot straps.
Footrest Receptacle And Pads
The Footrest Receptacle and Pads is a foot support made of a vacuum formed plastic shell covered with molded foam, and mounts to a standard wheelchair footrest or Otto Bock Fullcare Orthotic Seating or MOSS II systems. Each footrest receptacle ($83.75) and pad ($50.25) is ordered separately. DIMENSIONS (HxWxL): Large is 13 x 10 x 6 inches; Medium is 10 x 10 x 5 inches (outside dimensions). COLOR: Black and grey.
Footrest, Swing Tube, & Bracket
The Footrest Swing Tube and Bracket is a one piece footboard which mounts to the insert bottom to support the feet and allow the seat and footplate to move as one. Knee flexion angle may be varied from 45 to 180 degrees with mounting hardware. The Seat Mount Footrest (model 33400, $156) is made of metal. The Footrest Swing Tube (model 33422, $36) provides for the use of independent footrests and legrest cradels and still allows for insert mounting. The Pivot Bracket (model 33420, $48), Swing Tub
FR100 Ergonomic Foot Rocker
The FR100 Ergonomic Foot Rocker is designed for individuals who need foot movement while seated. The foot rocker encourages gentle movement. This foot machine stimulates lower leg muscles and increases blood circulation by raising the feet and relieving pressure on the lower back. The FM100 Foot Rocker offers a stable yet dynamically adjustable foot support. Its non-skid surface ensures that feet will stay right where the user wants them – on the footrest – to relieve discomfort.
FR300 Ergonomic Foot Rocker
The FR300 Ergonomic Foot Rocker is designed for individuals who need foot movement when seated. The Foot Rockers raises user's feet to relieve pressure on the lower back when sitting.The FR300 and FR300B Foot Rockers, with their ball bearing rollers, encourage users to move more by rocking their feet. This rocking motion uses the lower leg muscles to increase healthful circulation. The FR300B offers built-in massage balls to rejuvenate tired feet. In addition, both Foot Rockers offer three-inch
Front Mount Height Adjustment Headrest Bracket And Pads
Three custom size pads mounted on angled Kydex bracket which slips over top of tall solid back. Mounting knob in solid back secures headrest. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit ($140), or bracket ($40) or pads may be ordered separately.
Full Body Support Cushion
The full body support cushion is a lumbar support cushion. Allows user to sit in a natural, relaxed position. The back flexes from flat to upright to conform to furniture angles.Reduces strain on the lower back, pelvis and spine. Discourages slouching. Strap adjusts for use in a chair or car seat. Lightweight and easy to transport.
Functional Forms Positioning Furniture - Medium Supported Supine
Functional Forms Positioning Furniture - Medium Supported Supines unique design provides the broadest range of sizes and shapes. While its fabrics provide the best support to allow for maximum comfort, its foams provide maximum support. Functional Forms are extremely durable, environmentally friendly and with very low maintenance costs. Furniture is antibacterial, antifungal, flame retardant, antistatic, non-absorbent, self-deodorizing and form fitting. X-small and x-large sizes and individual p
Functional Forms Wheelchair Easel / Lap Tray
The Functional Forms Wheelchair Easel/Lap Tray is designed to provide a lightweight alternative to traditional lap trays for wheelchair users. Features include a built-in 20-degree angle, pencil holder/wrist rest, removable carrying strap, magnetic paper holder, and a hidden zippered pouch. This easel also has a water-resistant vinyl or leather covering. WEIGHT: 1 pound.
Gel Bunion Toe Spreader
The Gel bunion toe spreader is designed for individuals who need bunion relief. This product eases pain, reduces joint pressure and properly aligns toes. Protects the big toe from friction. Gel slowly releases medical grade mineral oil to protect skin. Fits the big toe on your right or left foot. Hand wash. Air dry completely before next use. Sprinkle with talcum powder if gel becomes tacky.
Gel Callus Cushions
The Gel Callus Cushions are designed to bring relief to individuals with foot calluses and metatarsalgia. The polymer cushioned adhesive patch, will stick to the bottom of the user’s foot, covering the callous or the tender area. Reusable—users rinse (cold water) and let it air dry. Two cushions per box.
Gerimate Bolster
The Gerimate Bolster is a back support cushion designed to offer support and comfort for persons using Geri-chairs. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.
Growth Guidance Systems (Ggs)
Growth Guidance Systems (GGS) are child's tilt-in-space wheelchairs designed for use by children with mobility, neurological, or severe physical disabilities. FRAME (WxL): The frame is available in Toddler 1, Toddler 2, Toddler 3, Youth 1, Youth 2, Youth 3, Junior Adult 1, Junior Adult 2, or Junior Adult 3 configurations. The standard frame is a folding step-release tilt-in-space frame. Also available are a folding base with manual release tilt and a rigid base with or without step-release tilt.
Growth Links & Dial Links (Model Gl01 Through Gl06 & Gl10)
Growth Links (Model GL01 thru GL06) and Dial Links (GL10) are hardware designed for attaching seats and backs. They are designed to be used with aluminum pans, but Wood Adaptors (Model GL21, $40/pair) are available for mounting to wooden panels. The links come in pairs and have adjustable angles. Growth links are to be used when back is supported by separate frame. Dial links support back independently.
Gull Wing Knee Separator (Model 703077)
The Gull Wing Knee Separator, model 703077, is a knee separator designed for use by individuals who use wheelchairs. This durable plastic frame holds the knees in abduction and interior foam padding provides comfort. Velcro straps adjust for each leg and keep the device securely in position. The frame can be adjusted using a heat gun.
Half Pad (Models 1320-01, -21, -31,-32, -33, 1330-01, -21, -31, -32, & -33)
The Half Pad is a torso support designed for use by individuals with severe phnysical disabilities or spinal cord injury while in a wheelchair. Curved to body contours, it can adapt to many positioning applications. The Half Pad is made of 16 gauge steel, zinc plated, and formed with recesses for ##10-32 press nuts to attach it to the wheelchair. The recess is placed vertically to the side of the pad. The Trunk Pad has padding and is available covered with a variety of upholstery. OPTIONS: Avail
Halo Strap
Soft velcro strap with mounting hardware and D-ring closure. Mounts to headrest system by attaching to lateral headrest pads. Cloth lining available on request.
Handy Lap Tray
The Handy Lap Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities. Designed to rest securely on the user’s lap, this tray features different sized and shaped spaces and pockets for organizing food or activities when seated in a wheelchair or a chair. Other features include end stands that hug the legs to help secure the tray and give the user a stable working surface. COLOR: Gray.
Happy Pillow
The Happy Pillow is a life-size emoji for emotional regulation designed for children ages 3 and up with ADHD, autism, or sensory integration disorder to provide sensory input. Supports self-expression and mood regulation.
Hat Holder Head Support
---- DO IT YOURSELF ENTRY --------- PURPOSE: To provide a do-it-yourself solution for a young lady with head mobility issues to keep her head from falling forward while communicating and/or eating. A sturdy post was attached to the back of the young lady’s wheelchair. Various hats, headbands, etc. were modified by adding a string and hook. The string and hook are attached to the post on the back of the wheelchair keeping the young lady’s head upright. TITLE: The Hat Holder. WEBSITE: Workshop S
Head Pod
The Head Pod is a head and neck support system designed for children with inadequate head control with combined hypotonia of the neck and trunk. Straps fitted around the user's head are connected to a support over the user's head which is attached to the rear of the user's wheelchair. Users who benefit from the Headpod include children ages 2-12 years old who are unable to sustain the weight of their own head due to neck weakness, provided that there is no high extensor tone in the trunk or sign
Head Rest Supports (Models 430C1, 430C2, 430H1, 430H10, 430N1 Series)
The Head Rest Supports are headrests and neckrests made from molded, contoured foam, and reinforced with flexible steel. They are available in large headrest, small headrest, combination headrest and neckrest, large neckrest, small neckrest, and lateral control. They can be modified as needed by bending the steel insert to the desired shape.
Head Stabilizer
The Head Stabilizer is a headrest designed for use with the tall models of the IncrediBack Rigid and Moldable Reclining Back Systems (see separate entries). Available in a moldable and a rigid model, the height-adjustable Head Stabilizer provides head and neck support and have lateral head support. The moldable version enables the lateral supports to be molded to conform to the head and neck. A moldable insert provides support for those with neck tone. The rigid support offers the same design, b
Head Support
The Head Support is a head positioner designed to disperse pressure on the head for individuals who must remain in a lateral or supine position for extended periods. The concave support features a triangular cut-out in the center to float the ear when the user is in a lateral position or the back of the head when supine. This support is available in a choice of economy or standard density.
Head Support
DO IT YOURSELF ENTRY --- PURPOSE: To enable an individual with neurological disabilities to hold his head erect. A mold of the user's back was made of forming plastic and lined with 3/8-inch foam. The support is held in place with two-inch Velcro strapping. An upright rod made of 3/8 x 2 inch Lexan plastic (for stiffness) was attached to the top of the back piece. A padded, flexible head band made of 1/16 x 1.25 inch Lexan was attached to the top of the upright rod. Also, as an alternative to th
Head Support System (Models Plush-1 & Plush-2)
The Head Support System, models PLUSH-1 and PLUSH-2, is designed to provide comfort and support for individuals who have difficulty holding their head in an upright position. The base is a durable metal panel which is padded with two layers of foam that makes them feel as soft as pillows. They are covered in zippered Darlexx fabric and are easy to remove for washing. This head support system comes with a choice of hardware: swingaway mounting hardware; detachable hardware; fixed mounting hardwar
Head-Mount For Chin Switch
--- "DO IT YOURSELF" ENTRY ------- A thermoplastic “hat” with an attached wire which is bent down around the face and under the chin. The switch is attached with Velcro to a small thermoplastic square at the end of the wire under the chin.
PURPOSE: To stabilize a switch for activation using jaw movements.
MATERIALS USED: Low temperature thermoplastic material, 18 inch x 6 inch sheet, preferably colored, stiff wire, such as hanger wire, about 20 inch long, plastic welder glue, pressure-sensitive
Headrest / Neckrest Hardware: Hardback Headrest Hardware (Models 430F7, 430F2, 430F6, & 430F5) & Sling Back Hardware (Model 446K1)
The Headrest and Neckrest Hardware, consisting of Hardback Headrest Hardware and the Sling Back Hardware, is a support system designed to attach Otto Bock headrests and neckrests to the back of a wheelchair. Model 430F7 has two ball joints for multi directional adjustability, including horizontal and vertical planes, for hard or rigid seat backs. Model 446K1 has attachment hardware for wheelchair frame of sling backs.
Headrest Hardware (100 Series)
The Headrest Hardware, series 100, is seating hardware designed for use on wheelchairs. Each hardware kit includes link hardware and offers a wide range of adjustment. This hardware offers five points of adjustability. COLOR: All hardware is black chromed and anodized.
Headrest Pads
The Headrest Pads are headrest accessories designed for use on wheelchairs. These pads are composed of a steel insert with self-skinning polyurethane. These pads are designed to attach to a one-inch ball. SIZES: Small, medium, oe large.
Headrest, Pad & Bracket
Headrest ($58.65 to 53.35). Easily removed pad has curved plastic base in 3 sizes. 1/2 inch foam cushioning, vinyl covered. Mounts to solid back insert with bracket ($108.35) which allows height, lateral and angle adjustments. 2 to 4 inches high, 5 to 9 inches wide.
Headsup Flexible Head Support System
HeadsUp is a head support designed for use by children and adults with neurological or severe physical disabilities or spinal cord injury. This support consists of a hat and flexible elastic bands that fasten around a wheelchair headrest or high seat or chair back to hold the head up. Each side adjusts independently from the other, creating the ability to apply the desired amount of tension. As the elastic stretches, it allows a full range of motion;as the elastic stretches, the resistance incre
Headwing Headrest
Two custom size pads, mounted to each side of tall solid back or splitback with angled Kydex brackets for lateral head support. Brackets slotted for adjustment of width. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit, or bracket or pads may be ordered separately.
Healthy Back Deluxe Lumbar Support
The Healthy Back Deluxe Lumbar Support is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. Designed to provide support to the lumbar area and spinal column, this cushion is made of a 100-percent molded open-cell memory foam that molds to individual body curves and contours. Other features include a hugging wing-like design that provides added comfort and stability. The cushion can be used fo
Healthy Back Inflatable Lumbar Support
The Healthy Back Inflatable Lumbar Support is a back support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. To find optimal position, release the valve and the backrest will inflate automatically. The support can be stopped at any time to meet user's firmness preference. When done, twist the valve and let the backrest quickly deflate to make portable.
Height Adjustable (Splitback) Headrest
Custom size pad and slotted aluminum bar mounts to shoulder height solid back with knob for easy removal and height adjustment. Pad is 1/2 inch thick medium density foam over 1/2 inch birch plywood. .
High Density Foam (Model 180)
High Density Foam, no. 180, is a firm, open-cell, ester-type polyurethane foam material designed for cushions needing pressure relieving cutouts. DIMENSIONS: 1 x 16 x 18 inches.
Hip Belt
Black nylon webbing belt, padded or nonpadded. 72 inches long by 1, 1 1/ 2, or 2 inches wide. Side release, pushbutton, or lever release buckles. Mounting bands to fit 7/8 or 1 inch tubing available.
Hip Belts (Model Ee 3C/103-5000)
Wheelchair seat belt. Nylin webbing and plastic delrin buckle. Has a pair of iliac crest relief pads so that the belt may be cinched tightly without causing pressure on the bony prominences. Should be mounted at a 45í angle to the seat.
Hip Strap
Velcro strap with mounting hardware and D-ring or buckle closure. Mounts to back of solid back or underside of solid seat.
Hip Supports, Pads, And Brackets
Hip pads are custom sized, 1/2 inch thick medium density foam over 1/2 inch birch plywood. Can be mounted inside armrests, or to seat with custom bent Kydex or aluminum brackets and bolts through threaded wood inserts.
Homedics Adjustable Lumbar Cushion (Model Lc-1)
The Homedics Adjustable Lumbar Cushion, LC-1, is a back support cushion designed to fit virtually any size back and to help alleviate back ache and strain. The cushion will adapt to any seating configuration and can be used at home, in the office or car. DIMENSIONS: 18 x 9 inches.
Howdaseat
The Howdaseat is a posture chair or web seat designed to provide correct support for the back for persons with back and lower extremity disabilities. The multi-purpose, roll-up seat is made of sanded basswood slats covered with stain and water resistant canvas. Cotton webbing straps are attached to the back and seat of the chair with a stapling and wrapping method of closure for extra strength and durability. Designed to firmly support the back, the seat wraps itself around the back and bottom w
Hug Plus.
The HugPlus is a vacuum seating system that conforms to body contours eithre in a seated or lying position. Thre models: torso, full-body, and 3/4. Unit wraps around the body to provide lateral support. The full-body system has a head support with head wings and a velcro closure across the forehead. Reinforces slat back. X-ray translucent. Waterproof. Exterior surface: top is 12 ounce vinyl laminated to 70 denier nylon, bottom is 12 pounce polyester vinyl laminate. Fill is polystyrene beads. Vac
Hydro Support Configuration (Model Hsc-1)
The Hydro Support Configuration, model HSC-1, is head support system designed for supporting the enlarged heads of individuals with hydrocephalus. It is a collection of four modular pads allowing a wide variety of positioning and options. Each cushion is padded with high quality foam and locks securely into place with ball and socket brackets. The cover is sewn from Darlexx water resistant lycra that is soft to the touch against the head. This head support system comes with a choice of hardware:
I Back (Model H)
Modification for any Freedom Designs solid back insert, 1/2 inch marine grade plywood, 1 1/2 inches of foam padding, naugahyde upholstery. Cut in the shape of a capital letter-I+ so that trunk supports are at the trunk and adjustable the length of the center section. Can be used with any hardware.
I-Spire Series Lumbar Cushion
The I-Spire Lumbar Cushion is a lumbar support cushion designed to reduce back fatigue, ease lower back pain and relieve tension for individuals who have back injuries or posture problems. Supports lower back while seated which helps to reduce back tension. Comes with an adjustable strap with buckle to hold lumbar cushion in place.
Imak Back Cushion
IMAK® Back Cushion is a lumbar support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods of time. Designed to help improve posture and reduce back stress. Large and small vacuum-formed air pockets generate a pressure point massage for the back.
Universally designed to fit most car seats as well as office chairs. Constructed of sculpted foam. Removable polyester cover is washable.
Incredihugger Wheelchair Back
The IncrediHugger Wheelchair Back is a wheelchair back support designed for use by wheelchair users with cerebral palsy, neurological disabilities, scoliosis, or upper extremity disabilities. This replacement back can be custom molded to fit the user's body contours. Its lateral supports help discourage side leaning, and its seat recline of up to 30 degrees discourages front sliding. The back has four inches of height adjustment, and may be folded with the wheelchair. The back comes in a standar
Inflatable Neck Rest
The Inflatable Neck Rest is a neck support designed for use by individuals with arthritis. It supports the head whether sitting or lying down. It comes with a carrying pouch for storage when traveling. DIMENSIONS (HxDxW): 4 x 9.5 x 14 inches.
Inflatable Therapy Balls
Inflatable Therapy Balls are designed for people with balance disabilities to improve balance, coordination, flexibility and strength. The balls may be "under" inflated to give a soft, mushy feel or "over" inflated for a firm, bouncy feel. Ball size reflects maximum inflation. An electric inflator may be used to inflate the ball to its approximate size. Maximum size may be realized only by finishing the inflation process using a foot pump.
Interface Hardware
The Interface Hardware is headrest accessory hardware for the Occipital "T" Bar designed for positioning an occipital bar on a wheelchair. The Interface attaches to the rear of the occipital bar. DIMENSIONS: The swivel tubes are available in 4-, 6-, or 10-inch lengths. The "T" tubes are available in 4- or 6 inch lengths. COLOR: Available in black and stainless steel.
Interface Hardware (Models 442F2 & 442F1)
The Interface Hardware, models 442F2 and 442F1, is seating hardware designed to allow mounting of Otto Bock seating systems into Maclaren or Pogon strollers or wheelchairs ranging from 10 to 18 inches wide. A spring-loaded plunger mechanism allows quick removal of the seat for transfer into another base or for transporting. Custom interfaces are available to accommodate mounting systems on most power bases and scooters.
Invacare Comfort-Mate Extra Cushion And Base
The Invacare Comfort-Mate Extra Cushion and Base is a foam seat cushion designed for use with wheelchairs. This contoured, lower-profile cushion has two layers of high-density molded foam for stability and pelvic support. Beveled sides enable the cushion to be used with a drop base. This cushion has a waterproof coating and comes with a waterproof cover with a non-slip bottom. OPTIONS: This cushion can be ordered with a built-in drop base which allows lower seat-to-floor heights to facilitate fo
Invacare Contouru
The Invacare ContourU is a molded seating system kit designed for use in wheelchairs. These seat and back cushions are made by utilizing a simulator and molding bags to capture the shape of the individual. This system provides optimum positioning while accommodating complex orthopedic deformities and tone. Support surfaces are built into the cushion and multiple finshing options, including naked foam with removable cocver, vacuformed vinyl, pelvic strap notches, and undercuts are available.
Invacare Curved Back & Invacare Pneumatic Curved Back
The Invacare Curved Back is a back support cushion for use with wheelchairs. Designed for users who require a solid back support, it features both comfort and visco-elastic foam and a built-in sacral positioning pad. The Invacare Pneumatic Curved Back includes a pneumatic lumbar support bladder. OPTIONS: Lateral supports, neck supports, and shoulder supports.
Invacare Infinity Drop Base
The Invacare Infinity Drop Base is a drop base for a wheelchair cushion designed for use by individuals who propell a wheelchair by foot or who require a lower seating position. This height-, angle-, and width-adjustable base enables the cushion to be dropped lower within the wheelchair frame than the standard seat. Quick-release hardware permits portability and provides secure attachment to most wheelchairs.
Invacare Infinity Dualflex Back
The Invacare Infinity DualFlex Backis a back support cushion designed for use in wheelchairs. A biangular flex hinge between the thoracic and sacral support panels provides precise adjustment of the back support shape. This allows for natural thoracic extension and balancing for users who require a higher level of back support. The dynamic flex feature also provides ease of upper body mobility as well as support and pelvic stability. OPTIONS: A range of accessories is available.
Invacare Infinity Loback
The Invacare Infinity LoBack is a back support cushion designed for use in wheelchairs. This adjustable back cushion features integral lateral supports and provides support to the lower pelvis while supporting the upper body range of motion. OPTIONS: A range of accessories is available.
Invacare Infinity Uniback & Invacare Infinity Uniback Foam-In-Place
The Invacare Infinity UniBack and the Invacare Infinity Uniback Foam-In-Place are back support cushions designed for use in wheelchairs. These cushions are single-panel back supports that offer economical versatility. Pelvic stabilizers and thoracic laterals are independently angle- and width-adjustable to accommodate a range of body shapes, as well as growth or change. OPTIONS: A range of accessories is available.
Invacare Kinesthetic Seating System (Kss) And The Invacare Kinesthetic Seating System Deluxe
The Invacare Kinsthethetic Seating System is a modular seating system designed for use with wheelchairs. This fully-adjustable system provides a personalized fit and accommodates growth. The system includes the Invacare Curved Back, the Invacare Ulti-Mate (also sold separately; see separate entries), basic headrest, fixed lateral support, padded lap belt, fixed growth bracket, and mounting hardware. The Deluxe system includes the components of the basic system plus swing-away lateral supports an
Invacare Personal Back & Personal Back Plus
The Invacare Personal Back is a back support cushion designed for use with wheelchairs. This lightweight back support provides comfort and positioning with built-in lumbar and lateral supports. The Personal Back Plus offers the same features plus increased lateral depth for additional stability and support. The back can be mounted in front of or behind the rear canes or at a reclined angle.
Invacare S-Back
The Invacare S-Back is a back support cushion designed for use with wheelchairs. This system adjusts to the shape of the user's spine with the turn of a knob and the curve can be adjusted throughout the day for different activities. Special mounting clips enable this support to be attached and removed from sling upholstery and permit height adjustment.
Invacare Silhouette
The Invacare Silhouette is a molded seating system kit designed for use in wheelchairs. This seating system is created by utilizing shape-sensor technology to capture the precise shape of the user's body. Computer-assisted manufacturing produces a custom-contoured cushion in a choice of soft or firm foam for maximum pressure reduction and stability.
Invacare Ulti-Mate Air & Ulti-Mate Air Pneumatic
The Invacare Ulti-Mate Air is a back supportcushion designed for use with wheelchairs. This back is anthropometrically contoured to promote good support and positioning of the spine. The seat-to-back angle can be adjusted from 90 to 115 degrees of recline. Quick-release hardware allows easy installation and portability. The Ultimate-Air Pneumatic also has a pneumatic lateral support.
Invisible Wheelchair Lap Tray (Model 606303)
The Invisible Wheelchair Lap Tray is a clear plastic lapboard designed for use with wheelchairs. Fittings include T-bars, rubber belt fastening straps, and foam padding to protect armrests. The unit fits most standard arm wheelchairs. DIMENSIONS: 22.75 x 22 3/8 inches.
Jay Active Back (Models 520, 522, 525, 527 & 528)
The Jay Active Back, models 520/522/525/527 & 528, is a back support cushion designed to provide comfort and stability for chair users. This contoured support cushion is composed of lightweight materials and features adjustable height and back angles designed to help relieve back pain. It also includes an "Air Exchange" cover designed to reduce perspiration and heat buildup. With a rigid back shell, this support cushion is not intended to bow or stretch. DIMENSIONS: All models feature adjust
Jay Adductor Wedges & Abductor Wedges / Build-Ups
The Jay Abductor and Adductor Wedges are accessories for the Jay Cushion. The firm foam wedges attach to the seat cushion with velcro or glues to separate (abduct) the legs, or position them closer together (adduct). DIMENSIONS: Adductor wedges are available in 1-inch (no. B119J, $25/pair) or 2-inch (B113J, $30/pair) sizes for adults, and a 2-inch junior/child (B163, $30/pair) size; Abductor wedges are 2 inches for adults (B118W, $25); abductor build-ups are also 2 inches (B118 and B168 Child/Ju
Jay Adjustable Solid Seat
The Jay Adjustable Solid Seat is a solid seat insert designed to improve posture by providing a firm, fully-adjustable base of support. The seat is adjustable in height, width, depth, and angle to allow an immediate fit and future change, when needed. The seat is made of rib-reinforced urethane and has an anti-slide surface so that cushions will not shift. The seat insert is designed to fit all wheelchairs; the universal cross-bar cut-out allows dropping the seat depth on virtually all wheelchai
Jay Back Cushion
The Jay Back is a foam and gel back support cushion designed to protect against scoliosis, kyphosis, instability, back pain, and skin breakdown. The cushion consists of an impact resistant ABS plastic shell with a middle layer of molded, contoured foam, and a Flolite spinal insert to prevent pressure problems on the spine. Flolite is a gel-like liquid that will conform to the user's body, but resists returning to its original position to prevent pressure on bony prominences. The water-resistant
Jay Combi Posture Seating System
The Jay Combi Posture Seating System consists of two foam cushions, one contoured, dual density seat cushion and one lumbar support back cushion, designed to reduce sitting fatigue, lower back pain, and slumping while promoting correct posture. COMBI SEAT CUSHION: The Combi seat is molded from two different kinds of foam. Inside is a contoured foam core that is firm, for support. Outside, a second layer of soft foam is added for comfort. The foundation resists compression from leaning to help pr
Jay Modular Back
The Jay Modular Back is a solid back insert made of aluminum that will accommodate either a Jay Custom Contoured Insert to fit deformities, or a Jay Standard Insert. The aluminum shell includes recline and depth adjustment, foam side guards, and clamp-on hardware. The Custom Contoured Insert includes a foam back with shim, full-width fluid pad, and an AirExchange cover. The Standard Insert includes a foam back with a spinal fluid pad and AirExchange cover. DIMENSIONS: Back shell is available in
Jay Scooter Seating System
The Jay Scooter Seating System is a portable seating system for powered scooters designed to reduce fatigue and back pain, and to provide more support and stability. The system consists of a Jay Cushion with Quadrant Pad ($385) and a Jay Back ($350). The Jay seat cushion's quadrant pad is divided into four sections to support against leaning and sliding, and is filled with Flolite. Flolite is a gel-like liquid designed to conform to the user's body and to retain the user's form to maximize relie
Jenx Bee Chair
Styled specifically to appeal to very young children and their families, and developed in conjunction with therapists and care-givers, the Bee seating system by Jenx is a playful and gentle introduction to supported seating. Providing a high level of versatility through a comprehensive range of fixed and height adjustable bases, along with a wide variety of head, trunk, leg and foot support options mean each Bee can be exactly tailored to the needs of any individual child. Adjustable back angle
Jett Step Footrst
The Jett Step Footrest is a specialized footrest designed for children with lower extremity disabilities and sensory processing disabilities that is anchored to any standard elementary school-sized chair to allow students to sit with proper posture and alignment. Ships in 2-3 weeks.
Jettstep Footrest
The Jett Step is a specialized footrest that can be anchored to a standard elementary school-sized chair allowing the student to sit with proper posture and alignment (by anchoring the front legs), as well as get sensory input from having his/her feet on a solid surface. Features 2 strips of adhesive tape, non-slip bottom and made of pine.
Juni
Juni has a seat and backrest that promotes better posture for children who require minimal level of postural support when seated. The Juni chair comes with contoured seat and backrest, built-in lumbar support, pelvic strap, height and depth adjustable seat, height adjustable armrests as well as angle adjustable backrest as standard features. This chair can be used in the classroom or at home and comes in a variety of colors.
Juni Hi Lo Base
This chair base is equipped with a gas strut to make adjusting the chair to 22.5" in height easier. The slimline footprint makes this the ideal chair to fit under most classroom desks.
The Juni Hi Lo Base has been designed with both the carer and child in mind. The adjustable push handle and lockable castors aid maneuverability. The adjustable footrest provide stability for the child’s feet. The Hi Lo Base is only available for the size 1 & 2 Juni chair. The mobile base and push handle hav
K-Special Back
The K-Special Back is a wheelchair back support designed for use by individuals with mild to moderate kyphosis and/or weakness of the trunk. This padded fabric back replaces the standard wheelchair upholstery, has a smooth surface, and is shaped to accommodate and support the user's entire back, eliminating pressure from the apex of the curve and providing lateral support. This back is available in slip-on or screw-on styles to accommodate most wheelchairs. Folding wheelchairs can be folded with
Kensington Halfback Chair Pad
Kensington® Halfback® Chair Pad is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. Chair pad has a molded plate and eggshell foam which encourages correct posture. Criss-cross elastic back straps are adjustable to fit all office chairs. It has a washable stretch Lycra slipcover.
Key Lock Trunk Supports
Trunk supports. For use with Adaptive Engineering Lab positioning system or most manual or power chairs. Provide lateral trunk support. Adjusts laterally and vertically. Attach to back frame of wheelchair.
Keyhole Back
The Key-Hole Back Support is a wheelchair back support designed for use by individuals with spinal curvature and other back disabilities. This back supports the user in an upright position, enhancing posture, visual field, respiratory function, balance and trunk support. The unit conforms to the individual body shape and a stretch fabric panel adjusts automatically to the severity of kyphosis, ensuring a custom fit. The user can change positions without sacrificing general support. Split back co
Kids Kore Wobble Chair
The Kids Kore Wobble Chair is designed for children ages four to 12 with Attention Deficit-Hyperactivity Disorder to transform boring seated activities into a way of burning excess energy and engaging core muscles for better health. Homework, drawing, eating and playing video/board games are no longer sedentary activities with this chair. Regular chairs force children's bodies to conform to an unnatural posture. Designed with a gently rounded bottom, it allows the knees, hips and back to find co
Kidster Chair
The Kidster chair is an individual wheelchair seating system designed for children from 2 to 12 years, or any individuals who fit into the seat sizes offered. The seat is certified as a child safety car seat when removed from the frame, and is designed for use as a positioner, self-mobile unit, recliner, floor sitter, and stroller. FRAME: The frame is made of steel and is coated with baked on nylon. The frame comes in black, blue or red. SEAT: A rigid seat with 2 inches of regular polyurethane s
Kinesthetic Seating System
Modular, adjustable seating system inserts on most wheelchairs. Package includes: a firm base that suspends from the frame and features anterior wedge, preischial bar, two inches of medium density foam, latex covering and seatbelt; a back that suspends from vertical wheelchair tubing with antigravity hooks; two molded plastic lateral supports, foam covered, that adjust vertically and horizontally; molded plastic padded neck support that adjusts vertically and horizontally. Options may be purchas
Kirton Bead Chair
Kirton Bead Chair is a lightweight and portable chair for children and adults who require assistance with positioning. It is a seating aid as well as a moldable positioning aid. The Bead Chair range has now been extended to incorporate the Alpha Bead Chair, an alternative contemporary design that provides a supportive and comfortable seating solution. Both the original Bead Chair and the new Alpha Bead Chair combine high quality specification and manufacture alongside durable materials to withst
Kiss (Keep It Simple) Simulator (Model Sm01)
The KISS (Keep It Simple) Simulator, model SM01, is a chrome steel frame seating evaluation system. It has adjustable seat depth, back height, back-to-seat angle, and tilt-in-space. The simulator folds for transportation. Removeable frames hold bags filled with plastic pellets for molding. Can be replaced with flat seat and back. OPTIONS: Accessories available include dual-head vacuum pump for molding (Model TL30, $700), adapter to mount unit on Arrow XT power wheelchair base, legrests, and Mag
Knee Abduction Straps (Models 25100 & 25110)
The Knee Abduction Straps are designed for use when a urinal is used or independent transfer is desired. The webbed, padded straps contact the thigh and are held in position with a cam-style buckle. Model 25100 ($68) is a complete set with 7/8 inch tubing clamps for mounting to the wheelchair frame; model 25110 ($30) includes the straps only. Both are sold in pairs.
Knee Separator (Model 6208)
The Quad Quip Separator, model 6208, is a knee separator designed to properly position the knees of individuals who use wheelchairs. Features include flexible foam padded knee separator, heavy gauge plastic, and even pressure distribution. DIMENSION: The separator is 4.5 inches wide and fits thigh circumference of 15 to 17 inches.
Knee Separator (Model F78480)
The Knee Separator, model F78480, is designed to provide gentle pressure between the legs for wheelchair users. The device is made of heavy-gauge plastic with a foam rubber lining for even pressure distribution. SIZES: Based on thigh circumference; Small (model H78480-0012) for 12 to 14 inches, Medium (model F78480-0015) for 15 to 17 inches, and Large (model F78480-0018) for 18 to 20 inches.
Knee Separator (Models N6400 & N6401)
The Knee Separator is designed for use by individuals with lower extremity disabilities. The hourglass shape helps promote proper alignment of the spine, knees, and hips. Model N6400 has a poly/cotton cover and model 6401 has a terry cloth cover. DIMENSIONS (LxDxW): 10 x 8 x 3 to 6 inches. COLOR: The cover on model N6400 is blue and the cover on N6401 is white.
Knee Spreader
The Knee Spreader is an abductor designed to maintain the knees in a slightly separated position while sitting. The separator is made of chrome plated steel and aluminum with a plastazote lining for pressure distribution. Thigh circumference is adjustable. This device is washable. SIZE: Standard size provides for 5.5 inches of knee spread. Custom sizes available through special order.
Knee Spreader (Model 6206)
The Knee Spreader, model 6206, is a knee separator designed to properly position the knees of individuals who use wheelchairs. Designed to increase sitting stability and reduce perspiration in the perinea area, this device is made of chrome plated steel and aluminum and lined with thick polyethylene foam for effective pressure distribution. The device easily adjusts to thigh circumference. DIMENSIONS: Provides 5.5 inches of abduction.
Lap Desk
DO IT YOURSELF ENTRY --- PURPOSE: To provide a writing or work surface for individuals using a wheelchair or who are unable to use a desk for long periods. Included in a chapter entitled "Living Room & Leisure Activities," this article provides detailed instructions with illustrations for making a lap desk from Luan plywood. A prototype of the desk is cut out of corrugated cardboard to determine the proper dimensions for the chair with which the lap desk will be used. When complete, the desk
Lap Hugger (Models 6515, 6515M, & 6515N)
The Lap Hugger is a torso support designed to prevent forward leaning by people who use wheelchairs. This soft lap cushion fits between the wheelchair user and the wheelchair frame and also provides arm support. The standard model have notches to fit around the armrest posts. Model 6515N is narrower for easier removal. Both styles have a wipe-clean vinyl cover. DIMENSIONS: Both styles fit 16- to 18-inch wide wheelchairs. The standard model is 4 inches thick. COLOR: Model 6515 is blue and model 6
Lap King Wheelchair Lap Desk
The Lap King Wheelchair Lap Desk is a wheelchair lap tray designed for use by wheelchair users. The Lap King is constructed of a two-sided detachable lap tray made of ABS plastic that is attached to a U-shaped microbead fill cushion. The lap tray is reversible with one side having a flat surface on which the user can write, read or eat; and the other side has a dimpled surface that allows the heat generated by a laptop computer to disperse and the computer to remain cool. Both sides of the lap
Lap Pal With Nylex Cover (Models Msc019038, Msc019037, Msc019032, Msc019035, Msc019030, & Msc019036)
The Lap Pal with Nylex Cover is a lapboard designed for use as a wandering patient system for wheelchair users with Alzheimer's disease or cognitive disabilties. This safety cushion fits snugly across the user's lap and securely against the wheelchair's arms, helping to keep the user from sliding down or getting out of the chair unassisted. The cushion is made of durable, lightweight polyurethane foam covered with Nylex fabric, and provides a resting place for user's arms. The cushion is flame-r
Lap Top Cushion (Series 307010 Through 307014 & 307030 Through 307034)
The Lap Top Cushion is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. Covered in durable, liquid-proof vinyl, these polyfoam-padded cushions serve as an armrest, a means of carrying personal items, a work surface, and a tool for promoting a more upright sitting posture. Available in three thicknesses, models are offered for wheelchairs with full- or desk-length arms and fit across the user's lap under the chair's armrests. The models fo
Lap Top Tray (Models 8220 & 8221)
The Lap Top Tray is a lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs or remain seated for long periods of time. These trays prevent forward leaning and provide elbow and arm support, while providing an activity surface. Model 8221 is padded for extra support and to reduce the risk of pressure sores. Model 8220 is clear to promote body awareness. Both models secure to the wheelchair with Velcro straps. DI
Lap Tray
The Lap Tray is designed for use by individuals who use wheelchairs. This waterproof tray has rounded corners, is melamine impregnated for durability, and sealed on both the top and bottom. A depressed edge prevents small objects from rolling off. DIMENSIONS: 23.5 x 22 inches with an abdominal cutout of 15.5 inches wide. COLOR: Woodgrain.
Lapboard.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Lapboard for wheelchair to make it easier to carry items. Instructions are provided on how to properly measure a lapboard for use with a wheelchair. Includes drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Occupational Therapy Service. TITLE: REF: Resource Sheet: Institute of Physical Medicine and Rehabilitation, New York. .
Lapboard.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides an attached table surface for a person in a wheelchair, can be used for activities or for arm support. Diagrams and suggested materials for trays; suggested variations include raised edging to keep articles from slipping off board, holes cut in board to stabilize dishes or other items. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Institute, Minneap
Laplander
The Laplander is a lap tray designed for use by individuals with upper extremity or mobility disabilities. This portable desk has a solid work surface with rounded corners, a cut-out oval handle, and cloth elastic straps to hold materials in place. The base is a cushion made of breathable Neoprene. OPTIONS: Laplighter clip-on light with a flexible gooseneck and replacement straps. DIMENSIONS (WxDxH): 23 x 15.75 x 2.5 inches. COLOR: Natural cherry with a cream cushion or dark cherry with a black
Large Ball Chair
The Large Ball Chair is a seating product designed for children with Attention Deficit-Hyperactivity Disorder to promote healthy posture and concentration. When the brain is stimulated in that manner, it is easier to focus on processing new information, exam taking and other pertinent aspects of classroom learning.
Large Oxbow Headrest (Model Lox100)
The Large Oxbow Headrest, model LOX100, is a headrest designed for use by use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side, and it is made of multi-layered foam with a zippered cover. DIMENSIONS (LxH): 16 x 8 inches.
Large Padded Headrest (Model Cph100)
The Large Padded Headrest, movel CPH100, s a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. This large multi-layered foam padded headrest provides comfort, support, and positioning. The headrest comes with a zippered Triptex cover. DIMENSIONS: 13 x 10 inches.
Large Rifton Activity Chair
The Large Rifton Activity Chair Standard is a positioning chair designed for children with neurological and physical disability for use in the classroom and at home. It enables children to learn functional sitting skills while they participate in activities. The Rifton Activity Chair does not require any additional tools to make adjustments. Parents and caregivers can make adjustments with the child in the chair. OPTIONS: Spring Option - This allows the child to have user-initiated movement. It
Lateral Body Support (Series 7060)
The Lateral Body Support is a lateral trunk support designed for use by individuals who use wheelchairs or geri chairs. These vertical supports stabilize the torso to provide positioning support to reduce leaning to the left or right. The supports feature a built-in armrest trough. These supports are available with a choice of three covers: launderable synthetic sheepskin, launderable polyester, and spray-and-wipe clean nylon. DIMENSIONS: Available in a choice of 12.75 or 14 inches high.
Lateral Extension Bracket
The Lateral Extension Bracket is torso support hardware designed for individuals with neurological or severe physical disabilities or cerebral palsy. The bracket expands the range in which seating supports can be adjusted laterally. The unit is attached at the end of the adjustment slot of the existing trunk lateral brackets and provides almost 3 extra inches of width adjustment for growing children and other individuals who need extra expansion of their seating system. This bracket bolts to mo
Lateral Facial Component (Model Lfc-1)
The Lateral Facial Component model LFC-1 is an accessory for the SOFT-1 or SOFT-2 headrest systems (see separate entries) that provides additional support to persons with severe ATNR or difficulty aligning in midline position. The support consists of two independently adjustable pads placed in front of the user's ears and extending from approximately the cheekbone to the crest of the head. The user's hearing or visual field is only minimally interfered by the device. The LFC-1 may be ordered thr
Lateral Hip And Thigh Supports (Adductors): 104-1000, 104-2000, 104-3000, & 104-4000)
Adductors of 1/2 inch plywood with Naugahyde, shelterite or synthetic lambswool covers. Front and rear tabs with snaps are standard. Model 104-2000 has solid seat mounting brackets which are laterally adjustable up to 3 inches. Model 104-3000 has mounting brackets in armrests, adductors can be removed with the arms. Model 104-4000 has multi adjustable mounting brackets, supports have 1/4 inch ABS plastic backing with separate removable 1 inch foam cushion. System provides adjustment for seat dep
Lateral Hip Pads
Naugahyde covered foam pads and brackets for mounting on solid back insert. Lateral adjustment possible, stabilizes hips and control adduction. 3 to 4 inches high by 5 to 10 inches deep, curved or straight.
Lateral Pads (Models 31460S, 31460M & 31460L)
The Lateral Pads are lateral trunk supports designed for use by individuals who use wheelchairs. Made of textured urethane self-skinning foam, these pads are equipped with T-nuts in all one-inch on center mounting holes. SIZES: Small, medium, or large. DIMENSIONS (WxDxH): The small pad is 3.25 x 4.25 x 1.25 inches. The medium pad is 4.25 x 6.25 x 1.25 inches. The large pad is 5.25 x 6.25 x 1.25 inches. COLOR: Black.
Lateral Stabilizer Armrest Bolsters (Series 7061)
The Lateral Stabilizer Armrest Bolsters are lateral trunk supports designed for use by individuals who use wheelchairs. These bolsters fit over the wheelchair armrests to reduce lateral leaning and provide cushioned support for the arms. The bolsters come in a choice of three covers--launderable polyester, launderable synthetic sheepskin, and spray-and-wipe clean nylon--and are available in models for full- and desk-length armrests. DIMENSIONS: Available in a choice of 5 or 6 inches wide.
Lateral Support (Model Ss20)
The swingaway Lateral Support (model SS20) can be mounted to aluminum pans or other rigid back panels, and it is designed to provide lateral trunk support to seated individuals. The support has a spring-loaded mechanism. It is adjustable forward and back and laterally. A malleable foam pad is included.
Lateral Support Orthosis (Series 7022)
The Lateral Support Orthosis is a lateral trunk support designed for use by individuals who use wheelchairs. Designed to facilitate an erect sitting posture, this orthosis is made of contoured plastic foam, padded with foam for comfort, and covered with a durable spray-and-wipe clean cover. The orthosis accommodates all torso heights and the lateral support wings can be adjusted by adding foam to the wing pockets or by warming the plastic frame with a heat gun and adjusting the wings. The foam
Lateral Supports
Lateral Supports are lateral trunk supports designed for use by individuals with mobility or neurological disabilities or spinal cord injury. All pad sizes are available in stationary or swing out style. SIZES: Small, medium, large, or extra large. DIMENSIONS (HxD): 3 x 3 inches (small), 3 x 4 inches (medium), 4.5 x 4.5 inches (large), 4 x 6 inches (extra large).
Lateral Thoracic Pad Assembly (Model Astp)
The Lateral Thoracic Pad Assembly, model ASTP, is a lateral trunk support designed to provide support to the sides of the upper body area. Stainless steel slide brackets (included) are used for mounting the pads to a solid back panel. A knob on the bracket permits easy removal. The pads are cold rolled steel, bent to 5 inch radius, with captive fasteners. These can be ordered unpadded or with 1/4-inch closed-cell foam upholstered with neoprene rubber bonded to a nylon terry cloth slip cover. SIZ
Leckey Everyday Activity Seat
Leckey Everyday Activity Seat provides an optimal level of postural support for children with moderate needs to they can enjoy activities.
Leckey Waistcoat
The Leckey Waistcoat is a vest restraint and torso support device designed for use by people with severe physical disabilities. This vest encourages development of proper trunk and shoulder positioning. Made of a lightweight material, the vest features two sets of adjustable vertical and horizontal straps that can be secured to the back of most chairs and seating systems with Velcro fasteners.
Leg Abductor Cushion (Models 758010, 758015, 758020, & 758025)
The Leg Abductor Cushion is a gel and foam or foam seat cushion with a built-in foam pommel to provide leg separation for individuals who use wheelchairs. The mattress features a safety strap that keeps the cushion in place, and a fluid-proof, wipe-clean vinyl cover to prevent against incontinence. Model 758010 is a foam cushion with a level base and model 758015 is gel and foam cushion with a level base. Model 758020 is foam with a wedge base and model 758025 is gel and foam with a wedge base.
Leg Rest With Seat Mounting Brackets
Custom size pad and pair of custom angled Kydex or aluminum brackets which mount to front edge of solid seat. Brackets may be hinged to provide adjustability on wheelchair with elevating legrests.
Legrest Pad (Models 440P1 & 440P2)
The Legrest Pad is an injection molded, steel reinforced calf trough with foam padding. It has an elliptical shape, curved to fit the natural contour of the leg. It attaches to the footrest support with fitted clamps. Adapter plates are available for some makes of wheelchairs. These can be used with Side Thoracic Support hardware.
Levenger Lap Desk
The Levenger Lap Desk is a lap tray designed for use by individuals with upper extremity or mobility disabilities. This wooden desk is designed to rest on the arms of a chair to keep weight off the user's lap. This kidney-bean shaped desk is equipped with elastic straps to hold books and materials in place; included on the strap is a pen holder loop. OPTIONS: Transparent writing pad and clip-on Laplighter light. DIMENSIONS (WxHxD): 32.5 x 16 x 0.25 inches. COLOR: Natural cherry or dark cherry.
Lift-Off Lap Cushion (Model 307050)
The Lift-off Lap Cushion, model 307050, is a lap tray designed to provide individuals who use wheelchairs with proper positioning and a work surface. This cushion is held in place with Velcro two closures that wrap around the front armrest posts and which are easily released by the act of rising from the chair; the closures also feature easy-to-grasp, easy-to-see loops which provide the user with the option of removing the cushion before rising. Covered in durable, liquid proof vinyl, the foam-p
Liquid Sunmate Foam-In-Place Seating (Fips)
Liquid SunMate is a 3-part seat mold system designed to assist persons specializing in custom seat building. The system contains pretested, premeasured ingredients sufficient to mold one chair seat bottom or one seat back. A total seat molding generally requires two units of Liquid SunMate. COMPONENTS: The introductory kit includes a FIPS instruction manual, one unit of Liquid SunMate, a quality test kit, and accessories. Components are also sold separately COLOR: SunMate may be ordered without
Low Lapboard.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides a work surface at a convenient height for food preparation. Can also be used to carry items from one place to another. Directions, diagram and materials for simple wooden tray that fits over the skirt guards of a wheelchair armrest. Edging along the front of the board prevents items from rolling off. SKILLS REQUIRED: Woodworking. AUTHOR: Fahland, B. TITLE: Wheelchair Selection: More Than Choosing a Chair With Wheels. REF:Book: Sister Kenny Ins
Lower Extremity Supports, Solid Calf Panel, Calf Troughs, & Calf Cuffs
Legrests with calf supports. Model 108-3000 is solid calf panel with fixed or swing away brackets, 1 inch drop hooks, 30 degree clamp, all sizes. Model 108-4000 is molded calf trough which mounts to elevating legrests, small has 3 inch circumference, large for 5 inch circumference leg, specify length. Model 108-6000 is molded calf trough which mounts to solid wheelchair seat, small for 3 inch circumference leg, large for 5 inch circumference, specify length. Also available: calf cuffs to mount t
Lumbar And Sacral Support Dry Floatation Cushion
Neoprene rubber lumbar support cushion in two styles: standard design is 15 inches by 6 1/4 inches with 4 inch air cells; contour design is 15 inches by 6 1/4 inches with varying cell heights from 1 to 4 inches in height, made to fit specifications of user. May be used vertically or horizontally, and attach to chair with velcro strap. Weighs approximately 1 1/4 pounds. Sacral support cushion is custom designed to user's specifications, with cells varying from 1 to 4 inches in height. Easily atta
Lumbar Foam Cushion
The Lumbar Foam Cushion is a lumbar support designed for use by individuals in need of additional lower back support while sitting. Made of dense polyeyrethane foam, this cushion cradles the lower back offering additional support and stability. Features include a removable velour cover that fastens at the back of a chair with hook-and-loop fastener for desired positioning. The cover is machine washable. COLOR: The cover is beige.
Lumbar Massage Heating Pad
The Lumbar Massage Heating Pad is designed for individuals with a permanent or short-term disability that affects the lower back- specifically, the lumbar region. It also has a heat option, with two settings, that operates independently from the massage. Can be secured around the torso with adjustable hook-and-loop fasteners. Contains two massaging nodes that target the five lumbar vertebrae. Nodes vibrate to massage. Heat automatically shuts off after 20 minutes. The pad is operated with a teth
Lumbar Pads
Custom size medium density foam pads with or without 1/2 inch birch plywood base. Mount to solid back in 3 ways: strapped on with cinch strap around solid back; velcroed to adhesive back velcro on pre- existing solid back; velcroed to back with velcro stitched into back upholstery prior to assembly. Adjustable in height by repositioning.
Lumbar Pillow Half Moon (Model 887)
The Lumbar Pillow Half Moon, model 887 is a back support designed for use by individuals with back pain or injury. Constructed of firm foam covered with black colored brush nylon, this back support provides support to the lower back when sitting in a car seat, chair, etc. The pillow is latex free and comes with a contact closure strap to help hold the pillow in position (not shown). DIMENSIONS (LxW): 11.5 x 2.5 inches. COLOR: Black.
Lumbar Roll
The Lumbar Roll is a foam roll cushion designed to correct improper lumbar curve and assist in establishing correct sitting posture. The polyurethane foam roll comes standard with a washable polycotton cover. OPTIONS: Securement strap. DIMENSIONS: 4 inches in diameter x 14 inches long. COLOR: The cover is blue.
Lumbar Roll (Model N6002 & N6003)
The Lumbar Roll is a lumbar support designed for use by individuals in need of additional lower back support. Availabe in a half roll, model N6002, or a full roll, model N6003, these cushions have an attached strap to secure it in position. A cover is included. DIMENSIONS: Model N6002 is 2 x 12 inches and model N6003 is 4 x 12 inches. COLOR: Navy.
Lumbar Support
The Lumbar Support is designed for use by individuals with lower back pain, weakness, or injury. Made of medical-grade polyurethane foam, this half-roll support comes with a velour cover and fills the curve in the lower back created by sitting. The attached adjustable strap secures the support to mst desk chairs and car seats. DIMENSIONS: 14 x 6 x 3 inches. COLOR: The cover comes in navy, tan, charcoal, or black
Lumbar Support Cushion (Model F1412)
The Lumbar Support Cushion, model F1412, is a lumbar support designed for use by individuals in need of additional lower back support. Made of molded high-density foam, this cushion has an attached strap to secure it in position. A removable zippered cover is included. DIMENSIONS (WxH): 14 x 13 inches. COLOR: Navy, burgundy, and gray.
Lumbotrain
Elastic low back support. Attachment in front has two large grommets on each side of the closure tabs to insert fingers for good leverage in tightening the support. Velcro closure. /diamond shaped support in back with a removable silicone elastomer lumbosacral pad. 5 sizes fit waists 27.6 inches to 47.2 inches.
Magic Hand Evaluation Kit
Heavy duty adjustable hardware system for positioning devices in close proximity to user. Ball joints allow angulation but tighten securely to maintain position. Includes table mount bracket, quick tightening handle, terminating plate for keyboard evaluation.
Magic Hands
Heavy duty adjustable hardware system for mounting head and trunk supports. Ball joints allow angulation of supports but tighten securely to maintain position. Adapters allow mounting to aluminum pans or 7/8 inch tubing. Use with Otto Bock pads or custom-made flat pads. Quick handle for frequent adjustment.
Magnetic Massage Lumbar Cushion (Model 9868)
The Magnetic Massage Lumbar Cushion, model 9868, is a combination massager and lumbar support designed for use by individuals with lower back pain and stiffness. Intended for home, office, or automobile use, this cushion features lumbar support for correct sitting posture, massage delivered by built-in massage motors, and four built-in bio-magnetic bars.
Magnetic Shoe Insoles
The Therion Ener-Flex Magnetic Insoles are designed for those individuals with lower back pain, lower leg fatigue, knee pain, or muscle cramping to relieve mild to moderate foot pain and to allow those persons to stay on their feet longer throughout the day. Durable. Ener-Flex Magnetic Insoles feature three layers of shock-absorbing foams which provides comfort. Covers the bottom of the entire foot. Include magnets that offer a deep penetrating bio-north field that dilates the capillaries to imp
Mangar Bathing Cushion Bathtub Lift
Mangar Health's Bathing Cushion Bathtub Lift is a product that promotes independence and helps maintain dignity. Works well for anybody that has difficulty getting in and out of the bathtub. A push of a button is all it takes to be lowered and then safely lifted without having to rely on others. This bath lift will allow for full immersion into the water for natural bath experience.
Mechanical Shape Sensor (Mss)
Seating simulator for persons needing a custom contoured seat cushion. Mechanical shape sensor measures resistance to weight at 100 separate points across the seat surface. Independent sensors at each point record the depth of contour. Readings are imprinted on paper in a simple dot pattern, which can be mailed or faxed to the manufacturer. The dot pattern is then electronically scanned and digitized to recreate a three dimensional picture which is used for carving a customized foam cushion.
Medesign Backfriend
The MEDesign Backfriend is a back support cushion designed to prevent pain and discomfort associated with poor seating design at home, in the office, or travelling. Two models are available; both of which are portable, will fit into any chair, support both the lumbar and thoracic regions of the spine, give full adjustment of backrest inclination, and have a height adjustment to position the curve where the user needs it most. The Single Padded Model has a 1-inch polyether foam padding on both th
Medic-Air Back-Pillo
The Medic-Air Back-Pillo is an inflatable back cushion designed to provide back pain relief and long term sitting comfort for persons experiencing arthritis or back troubles. Engineered to support the curve of the lower back, this air-cushioned support adjusts to the user's needs with just a few puffs of air. It is designed with elastic straps that allows the user to fasten the pillow to the back of most chairs at the desired position. It also features three interconecting air chambers intended
Medic-Air Lumbar Roll
The Medic-Air Lumbar Roll is a back support, air-cushion designed to specifically fit the Lordotic curve of the lower back for persons experiencing lower back pain. Providing localized thrust and extension, this lumbar support is designed to fit any back and conform to any seat. It aims to provide back pain relief and long term sitting comfort. Adjustable by inflation, it also features a positioning strap and is deflatable for carrying in pocket or bag. DIMENSIONS (LxW): 20 x 7.5 inches. COLORS:
Medline Back Support (Models Mscbl16, Mscbl18, Mscbl20, Mscb16, Mscb18, & Mscb20)
The Medline Back Cushion is a wheelchair back support cushion designed for use by individuals with mobility disabilities. This support cushion fits in front of a standard wheelchair back, eliminating the hammock effect of a sling back. Straps hold the cushion in place. The cushion has two layers of high-density foam to support the entire back and a ShearX all-way stretch cover to reduce skin shear. The cover is antimicrobial and fluid-proof. It is available with or without lumbar support. SIZES:
Memory Foam Lumbar Support Back Rest (Model 7154Bl)
The Memory Foam Lumbar Support Backrest, model 7154BL, is a foam back support cushion designed for use to provide back support while sitting in a chair. This lumbar roll offers direct support for the lower back region. The cushion's polyurethane foam adapts to the natural contours of the user's back. It has adjustable straps to fit any chair. DIMENSIONS (HxDxW): 6.75 x 3.75 x 14.5 inches. WEIGHT: 2 pounds. COLOR: Black.
Memory Lumbar Cervical Cushion With Strap
The Memory Lumbar Cervical Cushion with Strap is a back support cushion designed for use by individuals with upper extremity disabilities, back pain or those who have difficulty sitting for long periods. This cushion is made of memory foam designed to mold to individual body contours, offering support to the lumbar area and spinal column while sitting in a chair, car seat, or lying in bed. Features include a washable, removable polyester and cotton blend cover and positioning strap.
Mesa Back Supports
The M.E.S.A. Back Support is a lumbar support belt designed to aid in reducing back injuries resulting from lifting activities, particularly on the job. The belt gives abdominal and lower back support. All supports are made with shoulder straps and are machine washable. Styles include deluxe, premium, and power netting. OPTIONS: Belts without shoulder straps, metal stays, reflective tape, and company name/logo imprints. SIZE: Extra small to extra extra extra large and made-to-order sizes are ava
Metatarsal Cushion
This Metatarsal cushion is meant to cushion the balls of the feet and relieve pressure in the middle foot. The stretchy polymer gel pads relieve pressure in the middle foot area. They come in a pair or a left and right set. Can be slipped over second toe so it will stay in place. Corrected foot support promotes better posture.
Metatarsal Sleeve
This Metatarsal Sleeve is designed for those individuals with metatarsalgia who experience pain in the metatarsal region of the foot and for those individuals who could use relief from Morton’s neuroma, callouses and other disabilities that affect the forefoot. Soft elastic sleeve stretches to conform to your foot. Under the sleeve is a gel pad that eases pain. Top loop holds gel pad in place. Gel pad if made of Thermoplastic Elastomer (TPE) gel. Remove product 3-4 hours daily to let breathe. Ha
Mettler Applicator 216
The Mettler Applicator 216 is a product used for massage therapy, designed to help individuals who have deep pain in major muscle groups by providing a deep, heavy pressure massage of major muscle groups such as back, thighs, shoulders, and buttocks. This product can be used by people with fibromyalgia and other neurological conditions to ease their pain. The Mettler Applicator 216 (AP216) consists of four firm half-balls of smooth-surfaced rubber. It is designed to produce heavy pressure massag
Miller's Complete Support Systems
The Miller's Complete Support Systems are lateral trunk support components designed to be mounted off the seat, back insert, modular pan, or wheelchair frame, depending on the application, to give support to the trunk and pelvic areas or to provide adduction. Components of the seat, back, or pan-mounted systems include fixed, swing-away, and multiplane inserts, pads, and doglegs. The doglegs allow approximately 2 additional inches of lateral adjustment. The Multi Plane provides greater flexibili
Miller's Mounting Hardware Components
The Miller's Mounting Hardware Components are designed for affixing wheelchair accessories to solid seat and back panels or to 7/8 and 1 inch wheelchair frame tubing. Fixed, swingaway, and adjustable type clamps and brackets are available. COLOR: Silver or black chrome finish.
MiTable Topper
MiTable Topper is a device designed for children with upper extremity disability disabilities to provide protection against hard surface impacts. For use when eating or doing other seated activities, this vinyl-coated soft foam table topper protects heads and hands from making contact with a table. Easy to clean.
Mjm Multi-Position Bariatric Geri Chair (Model 518-Sl)
The MJM Multi-Position Bariatric Geri-Chair, model 518-SL, is a multi-position, bariatric geriatric chair designed for use by individuals who have mobility, balance, or neurological disabilities. The chair has a PVC plastic frame with push handle, a fully-padded seat with a tall seatback, and a cushioned leg rest. The chair is equipped with four threaded-stem casters. DIMENSIONS (HxW): 22 x 21 inches. The casters are 5 inches in diameter. CAPACITY: 300 pounds.
Mobilizr
The MOBILIZR is a torso support and wheelchair seatbelt for use by people with lower extremity and mobility disabilities, spinal cord injuries and others who use wheelchairs and need assistance to maintain or regain an upright position. This product requires no tools for installation on a wheelchair or scooter with push handles. It fits around the waist and over one shoulder. The MOBILIZR allows the user to bend forward, and then it aids the user to return to an upright position. It adjusts from
Modified Dining Chair
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted dining chair for a young woman with Dravet syndrome, an intellectual disability and epilepsy. Her seizures are severe and hard to control. When the young woman was younger she use to sit at the kitchen table using a high chair but as she got older, she outgrew the high chair and now needed a new way to sit comfortably at the dinner table. Upon initial evaluation, the assessment team tried a TAD Michelle Tilt-in-Space Supp
Modu-Tray
The Modu-Tray is a lapboard with bookholder designed to act as a tray or writing board for wheelchair users. Interchangeable inserts allow the user to have an adjustable easle for computer keyboard, reading, games, or a communication board, or a microwavable, dishwasher-safe fixed bowl that will not tip. The tray is made of a see-through Lexan plastic and features a cutout. It may be modified to fit standing tables, bolster chairs, and hospital bed tables. When fitted to a wheelchair, the tray i
Modular Cushions
Prefabricated molded modular seat and back cushions. Seat cushions come with or without molded abductor. Back cushions are available in two heights per width. Available in widths of 12 inches, 14 inches, 16 inches and 18 inches. Available to fit into separately sold aluminum pans or mounted to wooden base. Optional: headrest, shoulder retractors, armrests, leg rests, lateral supports, chest straps, tilting base, mounting hardware.
Modular Posture Control Systems: Pelvic Positioner
The Modular Posture Control Systems are modular positioning systems that easily attach to conventional wheelchairs. The Pelvic Positioner are designed as heavy-duty, multipositional, curved independent pads that bear on the sub-asis to secure the pelvis. They limit pelvic rotation, tilt, and obliquity. The positioners are available for both the track style mounting and the hex. The track style positioners are released by lifting the knurled portion of the pivot. They are then rotated outwards fo
Modular Seat And Back Cushions
The Modular Seat and Back Cushions are designed to work with custom systems or replace standard wheelchair upholstery. The cushions ($68 and up) are made of foam, with an easy to clean skin surface. The back pads ($23 and up) may be installed permanently with glue, attached with velcro, or bolted to the seats with hardware.
Monarch Mat
The Monarch Mat is an ergonomic mat designed to provide long-lasting comfort and support for individuals while they stand or sit at their workstations.The mat disperses pressure and increases circulation throughout the lower body. The mat is designed to seamlessly adapt to sitting and standing positions. Its butterfly design and outer grooves easily allow the chair base to move in and out of the workstation without having to be mounted onto the mat. The mat’s high thermal capacity and temperatur
Moss Lap Tray
The Moss Lap Tray is a molded plastic lapboard designed to mount to Otto Bock MOSS II seating system armrests (see separate entry) with the U-shaped aluminum frame. Fits 9.5, 11.5, 13.5, 16, and 18 inch seating systems.
Motorized Wheelchair Seat Shifting System
-- PROTOTYPE --------- PURPOSE: To create a prototype of a wheelchair seat that aids wheelchair users to change his or her seated position periodically. Changing position when seated for a long period of time is especially important for wheelchair users who spend almost every making moment seated. Failure to do so can result in deformities, bedsores, or considerable pain. The Swiss research group, Empa, is working with an ergonomics company to develop a new type of wheelchair seat that periodica
Mounting Brackets (Model Mb02 Thru Mb 06 & Mb12) & Trunion Mounts (Tm01, Tm02, Tm03, Tm11, Tm12 & Tm13)
Mounting Brackets and Trunion Brackets are interfacing hardware designed for mounting seating systems on a variety of mobility bases. Quick release or permanent mounts are available. The brackets ($25) are for mounting on wood or aluminum shells (see related entry) and come in two sizes: 7/8 inch and 1 inch. The trunion mounts ($58) are available in the same sizes.
Movin' Sit Air Cushion
The Movin'Sit Air Cushion is an air flotation seat cushion designed to give the user a slanted seat base to promote proper sitting posture. This adjustable, wedge-shaped cushion is inflatable, washable, and portable. It also functions as a dynamic surface, with small, rounded protrusions on one side to create air circulation. The unit may also be used as a lower back support. It is inflated by mouth and easily adjusted for any chair or surface. DIMENSIONS: 14 x 14 inches.
Mps - Mobile Positioning System
The Mobile Positioning System - MPS (models 30-1100 and 30-1101) is a modular seating system on a wheeled base. The system consists of wedges, rolls, abductors, adductors, blocks, log, straps, and mobile base. Components are made of foam covered with a urine proof, stain and odor resistant, non-toxic material that is cleanable with a damp cloth. SIZES: MPS Child, 48 x 27 inches, and MPS Adolescent, 56 x 27 inches.
Multi Position Sleeping Pillow
The Multi Position Sleeping Pillow is a pillow and lumbar mat designed to support the cervical and lumbar spine. Useful for side, back and stomach sleepers. Supports the cervical and lumbar spine, and cushion knees and hips. Side Sleepers: Place the pillow between knees and the lumbar mat under lower back for spinal alignment. Back Sleepers: Place the pillow under neck and the lumbar mat under lower back to compensate for sagging mattresses. Stomach Sleepers: Place the pillow under one shoulder
Multi-Axis Offset Headrest Assembly (Model 32465)
The Multi-Axis Offset Headrest Assembly, model 32465, is seating hardware designed to attach offset headrests to standard wheelcahair frames. The entire assembly is designed to be used with small, large, combination, small lateral support, and neck rest style headrests (headrests sold separately). The heavy-duty assembly features an offset block that swivels on a ball for headrest adjustment in any direction, a straight bar that adjusts horizontally, a heavy-duty mounting ring, a durable mounti
My4Hands
My4Hands is a lapboard for use by people with lower extremity or mobility disabilities, spinal cord injury and others who use a wheelchair. The My4Hands independence assistant is a polyethylene board that has a proprietary "hold fast" high friction material coating on each side so the lapboard will hold position on the user's lap and items placed on the lapboard will remain in place. My4Hands also insulates the user's legs from heat generated by objects (such as laptop computers or cooking pots
Mydesc Arm - Standard And Removable Models
The MYDESC Arm is an add-on armrest wheelchair accessory designed to enhance the versatility of the MYDESC Custom Desktops (see separate entries) or to be used alone. This accessory allows the MYDESC units to be mounted on the side of armchairs and wheelchairs. This steel arm is padded with foam and available in two configurations: Standard and Removable. The MYDESC Standard Arm (model 347-S501) is designed to be a fixed accessory and attaches directly to wheelchairs and other furniture using st
Mydesc Custom Desktops
The MYDESC Custom Desktops are adjustable lapboards ergonomically designed to provide a hard writing or reading surface to wheelchair users and other individuals who work away from a desk or table and to alleviate the eye strain and neck pains associated with lap work. These portable units enable the user to swivel, tilt, or pivot the desk surfaces through an infinite number of positions in order to achieve the most comfortable desk surface accessibility possible. ADJUSTABILITY: These Custom Des
Mydesc Flip Top Storage Desk (Model 250-31)
The MYDESC FlipTop Storage Desk, model 250-31, is a lapboard designed for use by wheelchair users. This laptop desk is suitable for an artists or students who needs a place to put their supplies. It has a tilting work surface that lifts to reveal a storage compartment. Because both sides of the work surface are supported by a ball-joint, the surface can be tilted or shifted from right to left, and one side swings away for transfers. An Air Spring Lifter helps to ease lifting and lowering of the
Mydesc Scooter Model, The (Model 5000)
The MYDESC Scooter Model, model 5000, is a swing away lapboard designed for use with scooters. This lapboard attaches to the bottom of the scooter seat on a curved post that fits between the seat and the controls. The work surface features tilt-, height-, and swing-away adjustments. The unit features a transparent acrylic work surface, powder-coated steel tubing, and aluminum brackets that support up to nine pounds. The unit rotates and rises with the seat and it can independently swing out of t
Mydesc Tilt-Top Desks
The MYDESC Tilt-top Desks are lapboards designed to provide an adjustable hard writing or reading surface for persons who work away from a desk or table, or for wheelchair users. These portable desks are ergonomically designed to accommodate the user's needs by swiveling, tilting, and pivoting through an infinite number of positions. When use of the desk surface is completed, the desktop swings away from the user's body with a single wrist motion. There are four different tilt-top models availab
Nandu Snug Seat
The Nandu Snug Seat supports active children who require additional trunk and hip support. The Nandu is available in four sizes, each with up to 6.5 inches continuous height adjustment and up to 8 degrees forward tilt. The back rest can be reversed to provide abdominal support when in the forward leaning position. This design will help children sit up to work without having to work to sit up.
Ne-At Headrest Bracket
The NE-AT Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury, cerebral palsy and other individuals who need adjustable head support. This hinged bracket has 0.25-inch countersunk mounting holes spaced 1 inch apart, with a spring loaded crank handle for tightening in tight spaces.
Ne-At Quick Release Mini Trap Assembly
The NE-AT Quick Release Mini Trap Assembly is a a wheelchair mounting bracket that can support an armrest, a drink holder, a tray, or a laptop computer mount. This small, strong quick-release bracket comes in two versions, angle adjustable or not angle adjustable, and it has optional locking pins. DIMENSIONS: 2 x 2 x 0.75 inches.
Ne-At Seat
The NE-AT Seat is a modular seating system of comfortable and supportive positioning pads designed for use in wheelchairs. Although each piece is available and can be used independently, the full NE-AT Seat comprises the NE-AT Seat, NE-AT Back, and NE-AT Headrest and is designed to fit into any mobility aid. The reusable and reshapable positioning pads are constructed of thick rubber bonded to nylon and filled with Styrofoam beads. This not only creates an airtight bladder, but adds cushionin
Ne-At User Adjustable Lateral (Ne-Atural) Bracket Mount
The NE-AT UseR Adjustable Lateral (NE-ATURAL) Bracket Mount is lateral trunk support hardware designed for use by individuals with neurological or severe physical disabilities or cerebral palsy. This width-adjustable lateral bracket mount interfaces with most commercial and custom seating systems and converts most commercial and custom lateral brackets into lateral brackets that can be adjusted in width by the user or caregivers to make room for winter jackets or sweaters. Existing swing away o
Ne-At Ya (Yet Another) Tray Mounting Bracket
The NE-AT YA (Yet Another)Tray Mounting Bracket is lapboard mounting hardware designed for use with wheelchairs. The YA Bracket converts most commercial trays (Pin Dot, XL, Avanti, Invacare, etc.) from the existing slide-on or clamp style armrest mounting to a four bar linkage type clamp. This type of mounting can extend the life of the existing armrest pads, provide a stronger hold, and accommodate different size wheelchairs.
Neasy Swing Away Aug Com Mounting System
The NEasy Aug Com Swing Away Mounting System is a wheelchair mounting kit for communicators or lapboard mounting hardware designed fo use by individuals who use wheelchairs. This compact, heavy-duty modular mounting system for small to large devices or trays can be released and swung away by the user with only one or two pounds of pressure. Each swing away joint automatically locks into position with a stainless steel, spring-loaded pin at 0 degrees, 90 degrees (optional), and 180 degrees (optio
Neck Rest
The Neck Rest is designed for head, neck, trunk, and shoulder support for individuals with spinal cord injury or severe physical disabilities. The neck rest has an arched shape for relief of strain in the neck or shoulder muscles. This device can also be used while relaxing in bed, chair or car.
Neck Rest
The Neck Rest is a neck support designed to provide relief of pressure on the neck or shoulder muscles. The polyurethane foam support features a U-shaped groove in the center to support the neck. A polycotton cover is included. DIMENSIONS (WxHxL): 6 x 6 x 14 inches long. COLOR: The cover is available in white or blue.
Neck/shoulder Positioning Collar Assembly
The Neck/Shoulder Positioning Collar Assembly is a headrest designed to replace both occipital support and rigid shoulder positioners or other anterior thoracic supports for users with moderate to low "tone." The malleable aluminum collar provides posterior neck support and superior and anterior shoulder support. It is padded with closed cell foam and upholstered with nylon terry cloth backed with neoprene rubber. The mounting hardware (included) allows height and forward/back adjustment with a
Neoprene
Neoprene is a Lycra covered foam material that is waterproof and washable. DIMENSIONS: 1/8 x 44 x 120 inches ($120) or 1/8 x 42 x 45 ($85). COLORS: Silver and Dark Red.
Nesting Stools
These Nesting Stools are sets of wooden stools designed for individuals with balance disabilities to practice accurate body mechanics and posture training when standing. Can also be used at a desk or during seated mat activities. Friction tape on the top surface prevents slipping. Nest for storage.
Night Roll
The Contour Support is designed for use by individuals with lumbar injuries or disabilities. Intended for overnight use, this toll ties around the user's waist to provide lumbar support while lying down. DIMENSIONS: 36 x 4 inches for 24 to 34 inch waists or 42 x 4 inches for 34.5 to 40 inch waists.
Nodstop Special Needs
The Nodstop Special Needs is a head support designed for use by individuals with cerebral palsy, weak neck and shoulder muscles, or neurological disabilities such as amyotrophic lateral sclerosis (ALS) or multiple sclerosis (MS) who require assistance in holding their head upright while in a seated or semi-reclined position. It keeps the user's head, neck and shoulders in an upright position, and assists caregivers by holding up the user's head so the caregiver can have both hands free to feed t
Nodstop Travel
The Nodstop Travel is a head support designed for use as a comfort aid that promotes relaxation through support and stabilization of the head,neck and shoulders during travel, and by encouraging proper body mechanics and posture for healthy breathing and circulation. It can help provide restful sleep, relaxed neck and shoulder muscles, reduced pain and strain during travel, stabilized body posture and spine position, and improved breathing and circulation. It is for passengers using all modes o
Non Adjustable Protractors, Adjustable Protractors
One pair of custom size pads and one pair of custom bent Kydex brackets. Secured at shoulder height onto solid back with bolts through threaded wooden inserts. Slotted brackets ($178) allow width adjustment. Adjustable brackets ($246) are two-piece, allowing depth adjustment behind shoulder. Pads are 1/2 inch thick medium density foam and 1/2 inch birch plywood.
Obus Forme
The OBUS Forme is a back support cushion designed to provide proper spinal support in any chair, auto seat, sofa, or bed. This support conforms to the natural contours of the spine to guide the back into a correct anatomical position, allowing it to relax. This posture eliminates lateral pressure on the spine to reduce fatigue and discomfort and to provide support for the upper rib cavity. The support is available in high- or low-back models and can be fitted with an optional lumbar pad for extr
Obus Seat
The OBUS Seat is a seat panel designed to relieve fatigue from the buttocks to the sacrum and to the lumbar and thoracic areas. The panel will support up to 75 percent of the body's weight and prevent the ischial tuberosities to sink into soft cushions. The coccyx is protected by a contoured buttocks frame with a cut-out seat depression. The device also protects the thighs with additional molded padding to reduce fatigue, improve circulation, help prevent swollen ankles and feet, and maintain pr
Obus Supporting Roll
The OBUS Supporting Roll is a cylindrical pillow designed to provide support to either the lower back (lumbar area) or the neck (cervical area). This roll can be used in a chair or car seat. An elastic strap is included to hold the pillow in the desired position. The fabric cover can be removed and cleaned. DIMENSIONS: 12 inches wide, 4 inches in diameter. COLOR: Black, brown, burgundy, camel, grey, green, taupe, and two shades of blue.
Obusforme Highback Backrest Support
The ObusForme Highback Backrest Support is a back support cushion designed for use by individuals with back pain or individuals who spend long hours sitting. Designed to support the head, neck, and lower back, this polycarbonate S-shaped frame conforms and supports the natural contours of the back both laterally and horizontally. The frame of the backrest is covered with three layers of polyurethane foam that can be removed and sponge washed. The support also has a removable and adjustable lumb
Occi Dish
The OCCI Dish is a head support designed to relieve preesure from the back of the head. This support features a detachable cervical pad and a Durafilm-coated core for moisturer resistance.
Occipital Bar Assembly
The Occipital Bar Assembly is a headrest designed to provide posterior head support for individuals with good medial/lateral and rotary head control. The straight (model ASOB-ST) and contoured (models ASOB-LC and ASOB-SC) occipital bars are padded with neoprene rubber and upholstered with nylon terry cloth backed with neoprene rubber. The mounting hardware (included) allows height and forward/backward adjustment with slide bracket and knob. DIMENSIONS: The Straight bar is 6 inches long. The Con
Occipital Headrest Systems & 2-Step Headrest Systems
The Occipital Headrest Systems are head supports designed to provide support beneath the occipital portion of the head, as well as laterally. An aluminum ban inside the headrest covers may be bent, shaped, or cut down. Models are available fixed and swing-away, with or without headbands (nos. 91100 to 93200). The 2-Step Headrest models are appropriate where additional surface area and contact are required. They have an ABS plastic base which can be heated and re-shaped for a more precise fit. Th
Offset Multi-Axis Headrest Hardware
The Offset Multi-Access Headrest Hardware is a headrest accessory designed for use by individuals with severe physical disabilities and spinal cord injury. This hardware comes with a horizontal bar and ring for attaching a headrest pad. Our headrest hardware also comes with a back clamp which attaches the vertical tube to the back of the chair. COLOR: Black chrome.
Olympic Vac Pacs
Olympic Vac Pacs are body positioners designed for use by individuals with physical disabilities.These products are patient positioning systems comprised of large rubberized vinyl bags filled with tiny plastic beads. The bags are soft and pliable until the air is drawn out through a special valve. Atmospheric pressure forces the beads into a solid mass conforming to the exact molded shape. Vac Pacs hold their shape for 24 to 48 hours and allowing air back in to the bag returns Vac Pacs to a soft
Original Mckenzie Airback Roll (Model 706)
The McKenzie Airback Roll, model 706, is an inflatable back support cushion designed for individuals with low back pain, injury, or arthritis. Constructed of nylon-covered vinyl, this portable lumbar roll can be adjusted for firmness by increasing or decreasing inflation. The roll can be deflated and folded for transport in a wallet, pocket, or purse.
Original Mckenzie Cpm Roll (Model 709)
The Original McKenzie CPM Roll, model 709, is a lumbar support designed for use by individuals with lower back pain, weakness, or injury. This support also offers continuous passive motion to the lower back, inflating and deflating every 40 seconds. Continuous passive motion helps increase lower back flexibility and reduces muscle fatigue. The cushion includes a strap to secure it to a car seat or chair. POWER: Uses a car cigarette lighter adapter (included). An optional alternating current (AC)
Original Mckenzie D-Section Lumbar Roll (Model 700)
The Original McKenzie D-Section Lumbar Roll, model 700, is a back support cushion designed for use by individuals with lower back arthritis, injuries, or disabilities. This cushion features a D-shaped design intended to provide back support for the reduction of postural stress on the lumbar discs. Made of foam with a washable polyester cover, this roll secures to chairs and automobile seats with permanently attached adjustable elastic straps.
Original Mckenzie Lumbar Roll
The Original McKenzie Lumbar Roll is a back and lumbar support cushion designed to relieve back pain for individuals who have difficulty sitting for long periods. This portable lumbar roll supports the natural curve of the spine in all seating conditions. Designed with adjustable elastic straps, this roll made of foam and fits most chairs. DIMENSIONS (LxD): 11 x 5 inches. The straps are 38.5 inches long.
Original Mckenzie Lumbar Roll (Models 701 & 702) And Original Mckenzie Early Compliance Lumbar Roll (Model 704)
The McKenzie Lumbar Roll is a back support cushion designed for use by individuals with lower back pain, injury, or arthritis. Designed to support the lumbar lordosis while sitting this padded foam tube is placed between the curve of the lower back and the chair. A detachable elastic strap allows the roll to be worn around the waist or strapped to a chair. The roll's materials are washable. Model 701 is standard density and Model 702 is firm density. The Original McKenzie Early Compliance Lumba
Original Mckenzie Night Roll (Models 750, 751, & 752)
The Original McKenzie Night Roll is a back support cushion designed for use by individuals with lower back arthritis, pain, or injury. This roll provides back support for the lumbar region while the user is lying on his/her side or back. Made of foam with a removable, washable cotton and polyester cover, this roll ties around the waist. SIZES: Model 750 is extra small (fits waists up to 24 inches), model 751 is small/medium (fits waists 24 to 34 inches), and model 752 is large/extra large (fits
Original Mckenzie Super Roll (Model 708)
The McKenzie Super Roll, model 708, is a back support cushion designedfor use by individuals with lower back pain, arthritis, or injury. Made of foam with a velour cover, this roll features a removable elastic strap that can be attached to a high or low back chair and car seats. A Velcro strip sewn on the cover also enables direct attachment to fabric chair backs.
Orthocare Economy Arm Positioner Elevator (Models 3032 & 3033)
The Orthocare Economy Arm Positioner Elevator (##3032 and ##3033) is an elevating armrest and positioner designed for elevation of the forearm. This wedge elevator is made of foam with a contoured recess to position the arm. This device can be used in bed or with the pivoting arm positioning tray for wheelchairs (see separate entry). Vinyl covers are available; call manufacturer for prices. SIZES: Small (##3032, $9.35) and Large (##3033, $14.75).
Orthocare Elevating Horizontal Arm Orthosis
The Orthocare Elevating/Horizontal Arm Orthosis - Supinated or Pronated is an elevating armrest and positioner for use with wheelchairs or other chairs. The armrest is available in two styles: Models ##3034 to ##3039 are anatomically designed for supinated, neutral positioning that inhibits spasticity; Model ##3040 has a universal design that allows for pronated positioning with natural palmar arch. The system consists of an aluminum U-channel that adapts to all wheelchair arms securely with sta
Orthocare Pivoting Arm Tray (Model 3012) & Dynafoam Elevated W.h.o. (Model 3013)
The Orthocare Pivoting Arm Tray and Dynafoam Elevated W.H.O. are two separate devices designed for use one with the other. PIVOTING ARM TRAY (##3012, $45.25): This mounting clamp for a wheelchair accessory is made of ABS plastic fastened to an extruded aluminum channel with limited pivot capability. The L-bars of the clamp channel adjust to adapt to all wheelchair arms. DYNAFOAM ELEVATED W.H.O. (##3013, 36.45): This wrist and hand orthosis fits into Pivoting Arm Tray to create an elevated arm po
Orthocare Polynap
Orthocare Polynap is foam strap padding made of a urethane foam and napped nylonDE combination. Sold in rolls, this foam can be used to pad straps. The material iDE s napped on both sides and combines with Velcro hook material for universal fast DE ening along the entire length of the strap. DIMENSIONS: ##2001 measures .25 x 6 iDE nches x 15 feet per roll; ##2044 measures .25 x 2 inches x 15 feet per roll.
Orthocare Rigid Foam Knee Spreader (Models 2045 & 2048)
The Orthocare Rigid Foam Knee Spreader is a leg positioner and knee separator made of closed-cell foam that is flexible, yet firm enough to maintain abduction. The foam is easily cleaned by hand scrubbing with a mild detergent, but will not absorb liquid. Polynap straps with Velcro closures maintain the spreader in place. SIZES: Adult (##2045, abducts legs 5 inches) and Pediatric (##2048, abducts legs 3 inches).
Orthocare Slip-On Footrest Extenders (Model 3014)
The Orthocare Slip-On Footrest Extenders ##3014 are designed to eliminate heel slippage and override, and to provide static positioning for spasticity. The extenders are made of vacuum formed ABS (plastic). They have a raised, curved heel section and flat foot section. Padded Velcro straps cross the instep to hold each foot in place. The slip-on mounting adapts to standard footrests. The design allows a vertical fold-up position without interference. Sold in pairs.
Orthocare Static Knee Spreader (Models 2035 & 2041)
The Orthocare Static Knee Spreader ##2035 and ##2041 is a knee separator and hip abduction splint designed to abduct the hips and separates the knees while in sitting position. The device is constructed of aluminum and Kydex. Two curved shells fit the inside of the thighs, and are separated by an aluminum bar. DIMENSIONS: Model ##2035 provides 5 inches of abduction; Model ##2041 is adjustable to provide 5 to 10 inches of abduction. If necessary, the device can be modified with a heat gun.
Orthocare Static Knee Spreader With Mirror (Models 4042 To 4044)
The Orthocare Static Knee Spreader with Mirror is a knee separator and abductor designed with an adjustable mirror for self-catheratization and rigid knee separation. This spreader is constructed of aluminum and Kydex plastic. SIZES: Small (##4044, 6.25 inches of abduction), Medium (##4043, 9 inches of abduction), and Large (##4042, 11 inches of abduction).
Orthocare Suprone Headrest (Model 2018)
The Orthocare Suprone Headrest ##2018 is a contoured headrest designed to provide stable supine or prone positioning. It is made of polyurethane foam, and has a cross ventilation slot for breathing. SIZES: One size fits all.
Orthopod
The Orthopod is a low back orthosis and full back cushion designed to provide the user with the precise spinal pressures at various points on the back. The cushion may be used by individuals suffering from low back pain, arthritis, post spinal surgery pain, post laminectomy/spinal fusion, various spinal disc conditions, and sciatica. The support is portable and may be used when driving or travelling by car, bus, truck, etc., or at work. Two models are available: a High Back and a Low Back.
Orthotic Drop Seat (Model 6331)
The Orthotic Drop Seat, model 6331, is a solid seat insert designed to lower a wheelchair seat to enable foot propulsion of a wheelchair or to enable the user to reach the footplates. This seat replaces a standard sling seat and provides adjustable drop and it may be configured to create a wedge to prevent forward sliding. A removable padded, wipe-clean vinyl cover is included. DIMENSIONS: This seat fits 18-inch wide chairs and the drop is adjustable up to 3.5 inches.
Otto Bock Tall Back And Modular Back Headrest Mounting Kit & Otto Bock Headrest Adapter Kit
The Otto Bock Tall Back and Modular Back Headrest Mounting Kit ($5) and the Otto Bock Headrest Adapter Kit ($20) are headrest accessories that allow attachment of Otto Bock headrest mounting hardware directly to the Jay Back cushion, compensating for the contour of the cushion.
Oval Head Support System (Model Ohs-1 & Ohs-2)
The Oval Head Support System, model OHS-1 and OHS-2, are head supports designed for individuals wo have difficulty holding their head up on their own. Both Designs are padded with high quality foam and lock securely into place with ball and socket adjustment. Model OHS-1 is designed for minimal support, while model OHS-2 is larger and designed for wide support and well padded for those with behavioral difficulties. Both pads are covered in Darlexx water resistant lycra that is soft to the touch
Oversize Deluxe Poly-Carbonate Wheelchair Tray (Model 11E)
The Oversize Deluxe Poly-Carbonate Wheelchair Tray 11E is a lapboard for use by wheelchair users. The tray includes a universal mounting system, continuous 5/8 inch high lip/retaining edge, captive locking-knobs, and telescoping support arms for strength. The rim is fused into the plastic tray for added strength without added weight. DIMENSIONS: 24 x 24 x 1/4 with a stomach cutout 14 inches wide and 8.5-inch deep. WEIGHT: 12 pounds.
Oxbow Headrest (Model Ox100)
The Oxbow Headrest, model OX100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs who rotate their heads while seated in a wheelchair. It has flared ends that provide a flat area to rest the cheek when the head is turned to either side. DIMENSIONS: 15 x 4 inches.
P-Pod Postural Support System
P-Pod Postural Support System is an alternative seating solution for home, clinical, or school environments for children and young adults with upper and lower extremity disabilities.
Padded Half Lap Tray, Left (Model 16C012-2L) & Padded Half Lap Tray, Right (Model 16C012-2R)
The Padded Half Lap Tray is a lap tray designed for use by individuals who use wheelchairs. This tray has the epoxy-coated-steel slide-on mounting bracket. The hinged system allows for complete folding of the tray section thus leveling it with the side of the wheelchair. No tools are required for attachment. The tray section is padded with poly foam and covered with vinyl. Model 16C012-1L is designed for left-handed use and model 16C012-1R is designed for right-handed use. DIMEMSIONS: (WxL) 1
Padded Leg Rest With Attached Foot Rest & Padded Side Panel Leg Rest With Attached Foot Rest
Custom size leg and footrest pads with two pairs of bent Kydex or aluminum brackets, mounting footrest pad to legrest pad, and legrest pad to bottom edge of solid seat with bolts through threaded wood inserts. Adjustment for length and depth available. Can also be ordered with four side pads, two on each side of legrest and two on each side of footrest. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood, with vinyl covering.
Pal Swing-Away Lateral Support
PAL (Positive Action Lateral) Swing-Away Lateral Support is a lateral trunk support designed for use by individuals with balance disabilities, severe physical disabilities, or spinal cord injury who use wheelchairs. The pad angle of this lateral thoracic support can be rotated plus or minus 10 degrees. It is designed to fit the Evolution Back from Varilite (see separate entry). The pad has a steel base encased in multi-stiffness closed-cell foam with a washable cover, and is available in curved
Panda Futura, The
The Panda Futura is a seating system on a wheeled base designed for use by children from one to twelve years of age with mobility disabilities. This unit accommodates children with needs that change throughout a single day and is availavble with a choice of five mobility bases, including manual or power high-low frames that enable the child to interact from floor-level to the kitchen table. The contoured, padded, fabric-covered seat is available in a variety of sizes and the back of the seat ad
Panda Seating System By R82
The Panda Seating System by R82 is a seating system on a wheeled base for children and adults. FRAME: Indoor frame with gas spring has a 4 caster base; dimensions are 67 x 48 centimeters (cm), with seat height adjustable from 40 to 52 cm, or 46 to 58 cm. Hydraulic indoor frame with 4 caster base has the dimensions 67 x 48 cm, and seat height adjustable from 48 to 63 cm. Outdoor frame is 64 x 62 (standard width) or 52 cm (narrow) with seat height adjustable from 45 to 53 cm and dual bicycle type
Paxbac
PaxBac is a wheelchair back support designed to promote a more upright posture and to provide the proper amount of back support for wheelchair users with sling-back chairs. Made of molded foam, the unit fastens to the back of most sling back chairs with built-in attachment hooks. A tension strap allows the user to increase or decrease the amount of support provided to meet the differing needs of various activities. A loop handle on the tension strap enables the user to make adjustments while rem
Pediatric & Adult Anterior Thoracic Vests
The Pediatric and Adult Anterior Thoracic Vests are shoulder supports designed to be fastened to solid back panels of seating systems. The vests are made of neoprene rubber with nylon terry cloth bonded to both sides. Straps with nylon side-release Fastex buckles are attached to the vest. OPTIONS: Extra cushioning available to slide over shoulder straps. DIMENSIONS: Adult size is 7 x 5 inches high; Pediatric size is 4 x 4 inches high. The neoprene is 1/8-inch thick. COLOR: Black.
Pediatric Bucket Seat
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: The Pediatric Bucket Seat is a quick and simple floor seating solution for young children with balance, mobility or neurological disabilities who need a little extra support. For safety reasons, this seat should ONLY be used on the floor.
Pediatric Chest Harness
The Pediatric Chest Harness is a wheelchair torso support and positioning device designed for use by children and smaller adults with neurological disabilities. The harness has pads constructed from closed-cell foam and enclosed in a soft, breathable fabric. Elastic sewn at the shoulder allows for moderate movement such as weight shifting, propelling, reaching, and simple activities of daily living. The harness has a top pull and stays attached to the chair when not in use. It is washable and co
Pelvic / Hip Stabilizer
Solid, wedge shaped wood core with 1/2 inch high density foam padding. Covered with naugahyde, shelterlite, or lambswool. Available on adjustable/removable or flipdown hardware. Mounts to solid seat. Small: 6 by 3 by 3 inches tapered to 2 inches. Medium: 7 1/2 by 4 by 4 inches tapered to 2 inches. Large: 9 by 4 1/2 by 5 inches tapered to 2 1/2 inches. Extra large: 12 by 5 by 7 inches tapered to 3 inches.
Pelvic Stabilization Y Belt (Model 103-4000)
Y belt pelvic stabilization system provides control of pelvic tilt, rotation and obliquity. Price includes modification of solid seat to accommodate (with new seat). Sizes: extra small (6 to 8 inch sitting depth), small (8 to 11 inches), medium(11 to 14 inches).
Pelvic Stabilizer With Flip Bracket (Model Ee 3B/103-3000)
Pelvic stabilizer designed to allow abductors to flip under the seat to accomodate easy transfers. The bracket release is designed to be accessible to the independent user who is capable of gross motor skills. The abductor locks automatically in the same location to assure proper position of the pelvis and the rest of the body. Release available in right or left. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 i
Pelvic Stabilizer, Adjustable & Removable (Model Ee 3A/103-2000)
Removable pelvic stabilizer. Has a bottom hook that slides over seat into the proper position. Constructed of wood, foam padding and naugahyde upholstery, tapered shape. Standard sizes: small 6 inches long by 3 inches high by 3 inches wide in the front and two inches wide at the rear, Medium 7.5 inches long by 4 inches high by 4 inches wide at front and 2 inches wide at rear, Large 9 inches long by 4.5 inches high by 5 inches wide at the front and 2.5 inches wide at the rear, Extra large 12 inch
Pelvic Strap (Sb05)
The Pelvic Strap (model SB05) is a 1 1/2 inch nylon webbing belt designed to position, stablize and restrain an individual's pelvic area wen seated in a seating system or wheelchair. It has a push-button buckle closure. The strap's length is adjustable on one side, and there are three positioning grommets on opposite side.
Pillow Block & Abductor Block
The Pillow Block and Abductor Block are abductors designed for keeping the knees spread when seated. The Pillow Block (model 25150, $68) is made of firm, closed-cell foam and features contoured sides to "hug" the inside of the thigh. This model mounts to the chair frame with velcroed webbing. The Abductor Block is a padded, upholstered abduction wedge with a pull release swing-away block. The block mounts under the seat, and swings under the seat front for clear transfers. SIZE: Abductor Block i
Plantar Fasciitis Hot/cold Therapy Roller
The Plantar Fasciitis Hot/Cold Therapy Roller is a therapeutic hot/cold roller that massages and stretches the arch of the foot to reduce the pain of plantar fasciitis. This product has an hourglass shape, three convex surfaces that provide a firm grip, and a stable base to loosen the plantar fascia tissue. The device can be used at room temperature. The roller also can be warmed in water or chilled in the freezer. Clean its antimicrobial surface with soap and water.
Plantar Fasciitis Insoles
Plantar Fasciitis Insoles are orthotic insoles designed for individuals with plantar fasciitis or persons with a weak arch or for adult men and women who just need added support when standing or walking. The insoles use a 4 degree rear wedge which encourages a neutral foot position, preventing excessive pronation. Provides shock absorption. Can trim to ideal height.
Plastazote Foam Material
Plastazote Foam Material is splinting material and foam padding designed for use with individuals with arthritis or other upper or lower extremity disabilities. This material is heat-activated by heating in a 285-degree oven, after which it can be formed into soft, lightweight splints, cervical collars, or shoe inserts. The material can also be laminated by placing one piece on top of another and heating. This material is available in sheets or in rolls with self-adhesive backing. DIMENSIONS: T
Plastic Wheelchair Tray (Model 11A)
The Plastic Wheelchair Tray 11A is a clear acrylic lapboard that attaches to wheelchair arms with hook and loop straps that adjust with D-rings. The tray is rimless and has a radiused and polished edge. The tray has a 4-inch deep stomach cutout. DIMENSIONS: 17 x 24 x 1/4 inches; straps are 2 inches wide. WEIGHT: Approximately 5 pounds.
Playtray
The Playtray is a lap tray designed for use by children and adults with disabilities. This heart shaped tray is constructed of a durable, impact-resistant plastic and features a tabletop with a no-spill raised edge, a large storage compartment, a 360-degree gutter drink holder, and a carrying handle. The top is large enough to accommodate a standard notepad, a laptop computer, or food and drink. Its base provides stable support by fitting snugly over a person's lap. The tray is dishwasher safe.
Poly-Carbonate Wheelchair Tray (Models 11B.1 To 11B.4)
The Poly-Carbonate Wheelchair Tray, models 11B.1 to 11B.4, is a clear plastic lapboard with straps and D-rings for adjsutment, a 4-inch deep stomach cutout, and a 5/8-inch high styrene plastic rim. DIMENSIONS: Model 11B.1 is 16 x 20 x 1/4 inches; Model 11B.2 is 19 x 24 x 1/4 inches; Model 11B.3 is 24 x 24 x 1/4 inches; and Model 11B.4 is 24 x 24 x 1/4 inches with an 8-inch deep stomach cutout. WEIGHT: Models 11B.1 and 11B.2 are approximately 6 pounds; Models 11B.3 and 11B.4 are 8 pounds.
Polycarbonate Tray
The Polycarbonate Tray is a wheelchair lap tray designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use a wheelchair. The tray is made of polycarbonate and is available with no rim or with a polycarbonate, wooden, or rubber rim. SIZES: Child for 11 to 12 inch wheelchair; Junior for 13 to 14 inch wheelchair; Teen for 15 to 16 inch wheelchair; Adult for 17 to 18 inch wheelchair; Extra-Wide for 19 to 20 inch wheelchair; 2X-Wide for 21 t
Polycarbonate Tray (Model Tr03) & Elbow Pads (Tr21)
The Polycarbonate Tray (model TR03, $125) is a lapboard 1/4-inch thick with a rim across the front and sides designed for use on wheelchairs and seating systems. There is one size tray with cutout. The Elbow Protectors (TR21, $70) come in black only and are designed to be mounted to the tray.
Polyethelene Foam
Polyethelene Foam is foam material designed for use in prosthetic and orthotic applications. Available in soft, firm, and medium densities, this cross linked perforated foam can be thermowelded to polyethylene or to itself or be cemented with plastic polyadhesive cement. DIMENSIONS: 36 x 60 x 1/8 or .25 inches thick. COLOR: White.
Pommel Sit-Straight
The Pommel Sit-Straight is a foam seat cushion with a built-in pommel for abduction designed to reduce sacral sitting and to limit forward movement of the pelvis of individuals using sling seat style wheelchairs. The cushion has a concave bottom and a flat top. The pommel reduces the danger of adduction contracture and has a core that extends through the cushion to the cushion base for added stability. The material of the surface of both the cushion and the pommel is made of T-Foam (see separate
Portable Foot Rest
This Portable Foot Rest is designed for individuals who are in danger of DVT or Deep Vein Thrombosis. A foot rest may be needed to correct posture. The foot rests extends, is adjustable and folds up to fit in a carry on bag.
Portable Workstation Table + Fan
This Portable workstation is designed for adults who carry their work with them. It can fold up to fit inside most laptop carrying bags. It is ergonomic and functional. Meant to unfold to an ideal height and prevent against neck/back aches. Has a built in fan which keeps the workstation cool. Its features include dual cooling fans, adjustable legs, an angled resting spot, a cup holder, a Universal Serial Bus (USB) extension cord. Built of heavy duty plastic. Includes instruction manual. Pen/penc
Posey Breezeline Pelvic Holder (Models 4411 & 4427)
The Posey Breezeline Pelvic Holder, models 4411 and 4427, is a pelvic restraint designed for people with lower extremity or mobility disabilities and others who use wheelchairs to prevent the user from sliding out of the wheelchair or geri-chair. It is available with either a double tie strap for triangulation (model 4411) or a slide buckle. SIZES: Small, medium or large. DIMENSIONS (LxW): Model 4411 is 17.75, 21 or 24 x 17 inches (model 4411) or 16.5, 19 or 23 x 17 inches (4427). Upper waist st
Posey Lateral Stabilizers (Models 6312Sc, 6316Sc, 8212, 8212Sc, 8216, & 8216Sc)
The Posey Lateral Stabilizers, models 6312SC, 6316SC, 8212, 8212SC, 8216, & 8216SC, are lateral trunk supports designed to promote proper trunk alignment for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs who lean laterally. The secure fit prevents rolling of the stabizer on the armrest. These bolsters are available with removable, washable cotton covers (models 8212 and 8216) or vinyl (models 6312SC, 6316SC, 8212SC and 8216SC). The
Posey Self-Releasing Belt (Models 4183, 4183L, 4220, 4222, 4229 & 5145)
The Posey Self-Releasing Belt, models 4183, 4183L, 4220, 4222, 4229 and 5145, are wheelchair seat belts for people with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This belt has an airline-style buckle allowing for one-handed release by the user. It is made of machine-washable polyester webbing and can be used on a shower chair. The belt mounts on the wheelchair or shower chair with a screw (models 4183 and 4183L), rear removable buckle (4220),
Posey Self-Releasing Hugger (Model 6514)
The Posey Self-Releasing Hugger, model 6514, is a torso support designed to prevent forward leaning by people who use wheelchairs. This foam padded support is covered with wipe-clean vinyl. It fits in front of the user's waist and extends on the sides between the user and the wheelchair frame. It provides a flat surface over the user's lap as well as arm support. This unit secures to the wheelchairs with hook and loop closures which automatically release as the wheelchair user rises from the cha
Posey Torso Support (Model 3656)
The Posey Torso Support, model 3656, is a belt restraint and torso support designed to prevent forward leaning and sliding by people who use wheelchairs and geri chairs. This support features a wide chest band and two over-the-shoulder straps which can be fastened in the front or back with hook and loop closures. It is made of soft quilted fabric. SIZES: Small, medium, large, extra large and extra extra large; the extra large and extra extra large sizes should be selected for use with geri chair
Positioner Foam
Positioner Foam is an open-cell polyurethane ester foam material with a density of 2 pounds per cubic foot designed to be easily cut with a sharp knife to make shapes for x-ray or seating positioning. This fire-retardant material circulates air and absorbs liquids. When used uncovered as a positioner, it resists slipping on the surface. This foam can be upholstered for applications where its ability to absorb liquids is undesirable. DIMENSIONS: 27 x 72 inches with thicknesses of 1 to 6 inches in
Positioning Hardware
Positioning Hardware is seating hardware general designed for attaching positioning aids to wheelchairs. Available items include two-, four-, six-, and eight-hole adjustment hooks; drop hooks; drop hooks for thigh pad inner mount; drop hooks for thigh pad outer mount; side, bottom, and parallel flanges; latch tabs; universal rear bracket; and a swing tab U-bracket. Also available is a seatlock; a seatblock; a headrest mounting plate; a child's headrest support; an adult headrest support; and six
Posture Corrective Brace
The Posture Corrective Brace is a back brace designed for use by individuals who have a disability, like osteoporosis and postural disturbances or a condition that causes hunching or slouching, and designed to return those individuals’ back to a healthier stature. Reduces lower back pain, slouching, and hunching. Holds shoulder and back in a healthier position. Easily adjustable hook-and-loop closure increases and decreases the amount of support and pressure. Soft, non-elastic straps provide a s
Posture Curve Lumbar Cushions
The Posture Curve Lumbar Cushions are back support cushions designed to provides support vertically and laterally to the lumbar (lower back) area. The cushions are available with a strap to fasten to a seat at at the desired height. Models 102 or 103 for curved bucket seats of cars fit the inside width with angled back corners to go between the wings or bolsters at each end of the seat. The zippered covers are available in plaid or solid, velour or Merino wool.
Posturetex-Multiway Cushion
Posturetex-multiway cushion is designed for individuals with limited mobility and use a wheelchair or a scooter for mobility. It is a versatile cushion featuring a 2 inch nodular foam base as well as a 2 inch nodular foam back which can be folded in half to make a 4 inch base cushion. The 2 inch base cushion is available with standard or coccyx cut out. Covered in black jacquard velvet which is removable for machine washing and a carry handle easy transportation. Spare covers are also available
Power Headrest
The Power Headrest is a powered headrest and driving control system designed for use by individuals with upper extremity disabilities, severe physical disabilities, or spinal cord injury. This headrest features motorized activation to swing it into position for driving and to the storage position for unencumbered exit and entry into driving position. Its driving control function enables drivers with disabilities that limit hand/finger usage while driving to access turn signals, horn, dimmer, wip
Powered Armchair Modification
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted armchair for an adult with Charcot Marie Tooth Disease, a disease similar to Muscular Dystrophy, which causes muscle weakness and foot drop, making it difficult to walk. The individual had used a powered lounge chair to watch television. The chair had a remote control which tilted the chair at an angle that would lift the individual forward and hold him into an almost standing position to help him transfer to his walker and
Ppt Foam Padding
PPT Foam Pading is foam material designed to provide cushioning in splints and to cushion hypersensitive areas. Available with or without self-adhesive backing, the open-cell foam has a top layer of washable nylon skin that is smooth and comfortable to the touch. DIMENSIONS: 1/8 x 12 x 60 inches.
Pro Custom Cushion (Models Sc3022 & Sc3023)
The Pro Custom Cushion, models SC3022 and SC3023, is a foam and gel cushion and pelvic stabilizer designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. This cushion has moderate to high positioning and pressure relief features, and can be customized to meet specific positioning requirements. The Pro Custom Cushion has a high resiliency foam base with a pommel and side wedges providing strong pelvic stability and leg po
Pro Forma Matrix Wheelchair Seating And Positioning
Pro Forma Matrix Wheelchair Seating and Positioning are custom wheelchair back and seat supports designed for use by individuals who use wheelchairs. This system offers offers total body contouring and wheelchair backs is light and strong, making custom wheelchair seating and positioning quicker and easier. The Pro Forma Matrix can be fitted to a wide range of users as preformed Direct Wheelchair Backs or Full Body Wheelchair Seating. The Pro Forma Matrix is supplied as rectangular sheets, pre-f
Public Aid Tray (Models 33050, 33051, 33052, & 33053)
The Public Aid Tray is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): Model 33050 fits 12-inch chairs and is 18 x 19 inches with a 12-inch wide torso cutout. Model 33051 fits 14-inch chairs and is 20 x 20 inches with a 13-inch wide torso cutout. Model 33052 fits 16-inch chairs is 22 x 21 inches with a 14-inch wide torso cutout. Model 33053 fits 18-inch wide cha
Quad Care Attaching System (Model 31878)
The Quad Care Attaching System, Model 31878, is lapboard mounting hardware for use by people who are quadriplegics or who have upper extremity disabilities. The kit allows the user to attach a tray or lapboard to wheelchair armrests by using clear vinyl thumb loops to streetch elastic bands over baked epoxy metal attaching pegs. The elastic loop stretches around the armrest and the pull-ring hooks onto metal bracket. The kit includes elastic loops, vinyl pull-rings, and metal brackets with atta
Quick Clamp.
Mounting clamps for removing solid wheelchair seat and back. Attach to wheelchair frame. Keeps wheelchair seat and back securely in place. Twist the lock and both seat and back slide out to fold the wheelchair. Black finish. Available in 3/4 inch, 7/8 inch or 1 inch sizes. .
Quick Release Back (Model 102-7000)
Solid back insert, 1/2 inch marine grade plywood, 1 1/2 inches of foam padding, naugahyde upholstery. Quick release brackets fit 3/4 inch, 7/8 inch and 1 inch tubing. Bracket has a latch that pivots for easy quick release. Comes with multi-adjustable brackets. Backs are cut to fit between the rails.
Quick Release Hardware Kits
The Quick Release Hardware Kits are silver or black chrome plated hardware sets for mounting seat or back accessories to 7/8- or 1-inch tubing wheelchair frames. The kits include frame clamps with lugs, quick release brackets with spring-loaded knobs, and T-nuts and bolts for mounting to solid seat or back panels. Components may also be ordered separately.
Quick Release Seat (Model 101-7000)
Solid seat, 1/2 inch marine grade plywood and 1 1/2 inches of foam padding, naugahyde upholstery. Quick release brackets fit 3/4 inch, 7/8 inch and 1 inch tubing. The bracket has a latch that pivots for easy quick release. Seat comes with multi-adjustable brackets. Seats are cut to fit between the rails.
R500 Ergonomic Foot Rocker
The R500 Ergonomic Foot Rocker is designed for users who will benefit from moving their feet when seated. This foot rocker provides relief from prolonged sitting by encouraging a gentle rocking of the feet. By engaging lower leg muscles, it increases healthful circulation while also raising the feet to relieve pressure on the lower back.
Range-Master Shoulder Wand
The Range-Master Shoulder Wand is a collapsible stretching bar designed to be used by people with shoulder disabilities for performing therapeutic exercises to increase range of motion in the shoulder. The Shoulder Wand allows users who need to stretch scar tissue in the shoulder area to perform several easy exercises while maintaining proper form. The patent-pending design with an ergonomic handle assists in maintaining the proper hand position. The parts securely connect together with threaded
Recaro
Recaro is a car seat designed for use with children weighing 9-36 kilograms with balance, neurological, or other physical disabilities. It is made out of an aluminum frame and offers additional contoured seat padding, lateral support and adjustability. Additional features include anatomical seat padding with leg support and an adjustable back height and seat depth. The width of the shoulder pads is adjustable and it comes with a standard 5-point safety harness with simplified central adjustmen
Reclining Arms (Models 07-A & 07-B)
Arms attach to backpost of reclining wheelchair to maintain a position relative to the position of the body when reclined. Allows chair controls to move with the arms during the recline. LaBac Systems arm troughs and pads can be mounted on the arms. Arms are strong enough to hold a lap board. Model 07-B ($395) features a quick release mechanism which allows instant removal of armrests.
Reclining Chair Pic Syms
The Reclining Chair Pic Syms is a custom adaptation for a reclining wheelchair designed for individuals with severe physical disabilities to use in a classroom setting. This was a custom piece done for a student who was in a reclining chair for most of the school day. This rested snuggly on the arms of the recliner and was adjustable to the proper angle. This surface was a white board. Another carpeted surface velcroed onto this so pic syms could be placed on it. A mirror could also be velcroed
Reflection Planar Simulator (Model Pss-98)
The Reflection Planar Simulator, model PSS-98, is a seating simulator designed for use in evaluating planar seating and positioning options for individuals with lower extremity or mobility disabilities or spinal cord injury. This simulator can be used for evaluation of seated posture, evaluation of function, education of best posture, and documentation of optimal posture. The system is mounted on a reinforced Luv-Base, and includes three pairs of lateral pads and mounting brackets; one pair of a
REI Sit Pad
The REI Sit Pad is an inflatable seat cushion that can help kids with sensory processing disorders and attention issues keep calm. The inflatable cushion can provide enough movement and stimulation to help a child maximize their focus without having to get up and walk around. Can be assistive technology for kids with learning disabilities and attention deficit disorders.
Relaxo-Bak Comfort Seat
Relaxo-Bak Comfort Seat is a back support cushion designed for use by individuals with back pain. This form fitting plastic auxiliary seat, can be used over any soft seat for added firmness. Allows body weight to be carried on the lowest part of the pelvis. Pressure is taken off the coccyx to prevent switching and tightening of the back muscles. Molded plastic, recessed at spinal end to protect coccyx. COLORS: Black, Gray, Tan, Burgundy, Off-White, or Sky Blue.
Remedease Full Height Backrest (Model 71301)
The Remedease Full Height Backrest, model 71301, is a foam back cushion designed for use to add back support to any chair. This over-sized backrest contains high-density medical-grade, anti-allergenic foam that keeps its shape to support the user for long periods of time. An elastic strap on the cushion adjusts to fit any chair and holds the backrest firmly and securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover. DIMNESIO
Remedease High Profile Backrest (Model 71491)
The Remedease High Profile Backrest, model 71491, is a foam back cushion designed to add lower back support to a work chair. This cushion supports the user's lower back with high-density, anti-allergenic foam that keeps its shape. The cushion's elastic strap adjusts to fit any chair and holds the cushion securely in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cover, DIMENSIONS (HxDxW): 13 x 4 x 12.75 inches. WEIGHT: 1 pound. COLOR:
Remedease Lumbar Roll (Model 71101)
The Remedease Lumbar Roll, model 71101, is a lumbar support and foam back cushion designed to reduce back strain. This high-density foam cushion attaches to the back of a chair and provides direct support to the user's lumbar area. Its high-density anti-allergenic foam keeps its shape for long periods of time. An elastic strap adjusts to fit any chair and holds the backrest firmly in place. A full size zipper provides access to the removable and machine washable 100-percent polyester velour cove
Resident-Release Three-Point Wheelchair Belt (Models 610210 & 610215)
The Resident-Release Three-point Wheelchair Belt is a wheelchair seatbelt designed to provide security and positioning assistance. This automotive style-belt is a combination lap and shoulder belt that secures to the wheelchair using the existing screws. Model 610210 has side-release buckle closure and model 610215 has a user-friendly buckle. SIZES: One size fits most.
Retractable Headrest System (Models 06-1 & 06-1S)
Retractable headrest system for high quad power recliners. Headrest moves to natural position for support and retracts compactly behind back when not in use. Replaces spreader bar for back stability. Has infinite height adjustment on back. Power recliner and head rest can be activated with common switch with available interface. 24 volt DC gear motor with overload protection. Available for all makes and models of reclining wheelchairs. Model 06-1 is for standard back; Model 06-1S is for sliding
Retroback
The Retroback is a foam wheelchair back support designed for use by individuals with mobility, neurological, or lower extremity disabilities or spinal cord injury. This cushion is lightweight and durable and is equipped with a chrome-plated steel clip that attaches to the existing sling upholstery. Removing the Retroback is done by simply lifting it off the upholstery. The cushion also features a nylon/polyester water-resistant, machine-washable cover. DIMENSIONS: Available in 16, 18, or 20 inch
Rifton Advancement Chair (Models R901, R902, & R903)
The Rifton Advancement Chair is a modular seating system that promotes functional sitting for individuals with physical or neurological disabilities. This chair provides total support for people with little motor control or muscular strength. As sitting skills and strength are gained, this modular chair can be configured for decreased support. Adjustable arm prompts accommodate variable positioning, and assist in supporting posture for users that are unable to hold themselves upright for periods
Rigid Pelvic Stabilizer
Rigid bar with relief area in center for bladder. Padded for comfort. Quick release locks on each side. Small for 12 and 14 inch widths, large for 16 and 18 inch widths.
Risedale Powered Lift Chair
The Risedale Powered Lift Chair is a wing back chair that aids in lifting up a sitter to a standing position. Only the seat cushion rises and lowers for discreet assistance, and the compact size allows it to be placed in smaller rooms. The chair provides 100 percent of the lift for those up to 300 lbs. The cushion does not push a user forward and the legs are height adjustable for user comfort.
Roho Contour Base
Molded ABS plastic base with front pommel to encourage leg abduction, 7 degree slope from front for anti-thrust effect, 13 degree side to side slopes to center hips, to be placed under any Roho Dry Floatation Cushion. Weighs approximately 1 pound. Available in 3 standard sizes: 15 inches by 15 inches, 16 inches by 16 inches, 16 inches by 18 inches. Custom sizes available. 18 month warranty.
Roho Pack It
Lightweight neoprene rubber air cushion made of Mini Max cells, which are 1 1/4 inch high flexible air cells. Standard size is 16 inches by 9 1/2 inches, but can be customized to fit any size requirements. Encased in removeable two way stretch cover with elastic strap. Weighs approximately 1 1/4 pounds. 18 month warranty. Can be used for scapular, sacral, lumbar support, in shower or bathtub, automobile, airplane. Designed for lightweight travel use.
Rokzi Armz
Rokzi Armz are bolt-on armrests designed to assist the user with sitting and standing up safely. They have been specially designed to harmonize with the existing chair, helping children and young people with disabilities integrate into mainstream school environments.
Rokzi Legz
Rokzi Legz designed for use by children and young people with disabilities, who need extra support when using standard school chairs as a result of neurological involvement associated with cerebral palsy, traumatic brain injury or stroke.
Rolyan Temper Foam (Models A4881 To A4883)
The Rolyan Temper Foam, models A488-1 to A488-3, is open-cell foam material designed for use with splints. This durable, soft slow-recovery foam is aided in molding by body heat. Models A488-1 and A4882 are medium density and model A488-3 is soft density. Model A 488-2 is a plain-backed sheet and the other models have self-adhesive backing. DIMENSIONS: The self-adhesive sheets are 3/8 x 16 x 24 inches. The plain-backed sheet is 1 x 16 x 24 inches. COLOR: Models A488-1 and A488-2 are blue and mod
Rolyan Cervical Roll (Model A818301)
The Rolyan Cervical roll, model A818301, is a neck pillow designed to assist with cervical spine alignment for persons with cervical pain and stress. This foam roll is wrapped with a cotton cover and helps to encourage proper neck flexion. It can be machine washed and dried. DIMENSIONS: (Length x Width) 18 x 4.25 inches.
Rolyan Foam Padding (Model A7931)
The Rolyan Foam Padding, model A7931, is foam material designed for use with splints. This open-cell foam comes in sheets with self-adhesive backing. DIMENSIONS (TxWxL): 0.5 x 12 x 12 inches. COLOR: White.
Rolyan Knee Separator (Model A513300)
The Rolyan Knee Separator, model A513300, is designed for use by individuals with lower extremity disabilities. Available with a choice of a polyester cover or a vinyl coating, the wedge fits between the user's legs and a wide strap fits over the thighs to secure the wedge and distribute pressure over the thighs. DIMENSIONS: The wedge positions the thighs 4 inches apart. The strap is 46 inches long.
Rolyan Kushionflex Padding (Models A4551, A455002, & A455003)
Rolyan Kushionflex Padding is firm closed-cell foam material designed for use with splints. This washable foam cuts easily, resists bottoming out, and can be applied to splints prior to immersion in water. Models A455-1 and A455-002 have an adhesive backing and model A455-003 has a non-adhesive backing. DIMENSIONS: Model A455-1 is 1/8 x 17.75 x 24 inches and models A455-002 and A455-003 are 0.5 x 17.75 x 24 inches.
Rolyan Low Tack Polycushion Padding (Models A2913 & A2914)
Low Tack Polycushion Padding, models A291-3 & A291-4, is foam material designed for splints that require padding changes. This closed-cell foam is designed to peel off after application without leaving a sticky residue. DIMENSIONS: Model A291-3 is 1/8 x 17.75 x 24 and model A291-4 is 0.25 x 17.75 x 24 inches.
Rolyan Polycushion Padding (Models A2911 & A2912)
Polycushion Padding, models A2911 & A2912, is foam material designed for padding thermoplastic splints or for general padding designed for use by individuals who are hypersensitive to heat or pressure. The washable, self-adhesive closed-cell foam material can be cut with scissors and can be applied to splints prior to immersion in water. DIMENSIONS: Model A291-1 is 1/8 x 17.75 x 24 inches and model A291-2 is 0.25 x 17.75 x 24 inches.
Rolyan Slide-On Adjustable Lap Tray (Model A707001)
The Rolyan Slide-On Adjustable Lap Tray, model A707001, is a molded-plastic lapboard designed for use by individuals who use wheelchairs. This tray is equipped with bases that fit over the upholstered armrests of a wheelchair to help prevent tipping. The tray is designed to fit wheelchairs from 16 to 20 inches wide with standard or desk-length arms. The bases can be adjusted to fit with an allen key. OPTIONS: Back strap, model A3173. DIMENSIONS (WxD): 23.5 x 21.5 inches
Rolyan Strap Pads
Rolyan Strap Pads are foam strap padding designed for use in splinting. These hand-washable pads are made of foam laminated to loop material on both sides and have openings into which strap ends slide to distribute pressure and increase comfort. DIMENSIONS (WxL): 2 x 3 inches or 2 x 4 inches. The pads are 0.25-inch thick and accommodate 1- or 1.5-inch wide straps.
Rolyan Super Strap Ii Strapping Material (Models 755701, 755702 & 755704)
Rolyan Super Strap II Strapping Material, models 755701, 755702 & 755704, is foam strapping material designed for use with splints. This material features non-fraying knitted loop fabric, .25 inch thick breathable foam, and soft tricot backing. Both sides mate with hook material. This non-stretchable, hypoallergenic material is latex free and washable. DIMENSIONS (WxL): Model 755701 is 1 x 10 yards, model 755702 is 2 x 10 yards, and model 755704 is 4 x 10 yards.
Rolyan Wedge Flex Abduction Pillow
The Rolyan Wedge Flex Abduction Pillow, is an abductor designed for use by individuals with lower extremity disabilities. This open-cell foam wedge fits between the user's legs to provide hip abduction and can be used while seated or lying down. A slit in the foam allows knee flexion and a hand strap, which slips through slots in the wedge and controls the amount of flexion allowed. The hand strap also aids in positioning the wedge. The knee flexion slit can be modified to permit greater flexion
Rolyan Workhard Back Support (Models A81831 To A81835)
The Rolyan Workhard Back Support, models A81831 to A81835, is a heavy duty lumbar support aid designed to act as a preventive measure for persons with low back pain. With double waist strapping, it is constructed to provide both lumbar and adominal support. This brace also features adjustable shoulder straps and is not designed to constrict the user's daily activities. DIMENSIONS: Measure around waist - do not use pant size. Model A81831 - Small is 26 to 30 inches wide; Model A81832 - Medium is
S.o.f.t. Headrest System (Models Soft-1, Soft-2, Soft-3, Soft-4, & Soft-5)
The S.O.F.T. (Sub Occipital Formed Three-piece) Headrest System is a head and neck support designed to provide lateral cervical support. The device consists of a rear occipital pad and two sub occipital pads curved to allow ear clearance and to prevent "hooking". Each of the 3 components is independently adjustable. The support system also features ball and socket adjustments to provide an additional plane of movement. The total unit is attached to a height adjustable rod that is attached to the
Sacral Dish
The Sacral Dish is a back support cushion designed for use in wheelchairs by those who in wheelchairs who are at risk for sacral coccygeal pressure ulcers. This cushion's semi-rigid base and unique shape provide a supportive foundation to fill in the chair's back upholstery while offering pressure-free ventilated protection of the sacrum. The support straps to the existing seat back and can be used alone or with the ISCH-DISH (see separate entry) or other seating products. This support comes com
Sacro Ease (Models Bwc, Bwcs, Wc & Wcs)
The Sacro-Ease, Model BWC, BWCS, WC and WCS, seat supports are designed to provide individuals in a wheelchair support under the hips and behind the lumbar spine. Models BWC and BWCS feature a backrest that clamps to wheelchair upright. Models WC and WCS are seats only. The seat supports for all models are made of two one-inch polyfoam cushions with steel frame and latex rubber support bands between the layers of foam. The foam is covered with a removable, washable and waterproof cover. The diff
Sacro Ease (Models Rcrx, Rscrx, Rncrx, Brc-Rx, Brsc-Rxm & Brnc-Rx)
The Sacro-Ease, models RCRX, RSCRX, RNCRX, BRC-RX, BRSC-RXM and BRNC-RX, are seat supports designed to relieve pressure in cases of hermorrhoids, injury to or surgery on the coccyx or anal area and post-pregnancy. The RCRX, RSCRX, RNCRX models are only seat cushions only that have a cutout at the center rear of the seat. These cushions have 1 inch of high density foam with a steel frame. The BRC-RX, BRSC-RXM and BRNC-RX feature a backrest with an adjustable lumbar support cushion mounted with th
Sacro Ease Keri Back Cushion (Models Kbt & Kbn)
The Sacro Ease Keri Back Cushion, models KBT and KBN, is a back support cushion designed to reduce back fatigue, ease lower back pain for individuals who have back injuries or posture problems. Designed for taller users, this back support cushion has a steel frame, rubber and 1 inch of memory foam in the back. It is bendable for additional support and has a four way strapping system to fit most office chairs and car seats. DIMENSIONS (HxW): 18 x (15 or 12) inches. WEIGHT: 5 pounds. COLORS: Bla
Sacro Ease Sports Portable
The Sacro-Ease Sports Portable is a seat and back support designed for use at spectator sports events. The seat support may be used with or without the existing backrest. The seat closes to be carried like a briefcase. The seat support is manufactured with .5 inch of polyfoam on top of a bendable carbon steel frame with rubber supports. The upholstery is water-resistant fabric. The back support has a built-in lumbar support pad. The Sports Portable has a non-skid bottom, and it is available with
Sacro Ease Standard (Models Br, Brsm & Brn)
The Sacro Ease Standard, models BR, BRSM and BRN, is a back support cushion are designed for office chairs and auto and truck bucket seats with existing firm bottoms. This product features a seat bottom and backrest with adjustable lumbar pad on a foldable steel frame with rubber strap supports and a non-skid bottom. The Sacro Ease Standard provides support under the hips and behind the lumbar spine. The units are designed to fit to the individual and not the seat, thus the unit can be moved fro
Saddle Complete Seat
The Saddle Complete Seat is a drop seat base with a foam or gel and foam seat cushion designed for use in wheelchairs. The unit comprises a SmartSeat drop seat and a Saddle Cushion. The adjustable platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform.The cushion also features a
Safe•t Mate Drop Seat With Integrated Alarm (Model Sm-007)
Safe•T Mate Drop Seat with Integrated Alarm, model SM-007, is a wheelchair drop seat base and wandering patient system designed for use by wheelchair users with Alzheimers disease or cognitive disabilities. This system combines a solid drop-seat with a rugged, detachable 95- decibel alarm with automatic reset. DIMENSIONS: The drop seat is 3/8-inch thick and fits chairs from 16 to 22 inches wide. WARRANTY: Limited lifetime guarantee.
Safety-Soft Security Belt (Models Mdt822125 & Mdt822126)
The Safety-Soft Security Belt is a wheelchair seatbelt designed for use by individuals with cerebral palsy, mobility or neurological disabilities, or spinal cord injury. This seatbelt helps keep wheelchair users upright. The belt has a polyester strap with a thick foam lining to reduce friction on the user's hips. It has bar tacks at stress points and is washable. The one-piece style (model MDT822125) is a single piece of foam that ties behind the back. The two-piece style (model MDT822126) has
Sammons Preston Arm Tray With Foam Elevator (Model A7464)
The Arm Tray with Foam Elevator, model A746-4, is a plastic arm support and trough for use by people with upper extremity disabilities who also use wheelchairs. The unit includes a washable soft foam insert for cushioned elevation that can be trimmed and customized for individual needs. The tray includes straps for attaching the arm tray to the wheelchair. OPTIONS: Replacement foam inserts, model A746-5, are available for use with this or other Smith & Nephew Arm Trays.
Sammons Preston Closed-Cell Carve-It Foam (A50763)
The Sammons Preston Closed-Cell Carve-It Foam is foam material designed for creating custom supports to reduce pressure, decrease edema, manage contractures, and reduce pain through better positioning. This foamm can be cut with an electric knife to be used to create sidelying wedges, knee separators, arm troughs, pelvic blocks, heel protectors, cervical supports, and more. DIMENSIONS: Available in blocks of 24 x 36 x 2 inches.
Sammons Preston Elevating Arm Tray Kit
The Sammons Preston Elevating Arm Tray Kit is an arm trough and arm posiiitioner designed for use by wheelchair users who must keep one arm elevated. The tray straps to right or left standard or desk-length wheelchair arms with Velcro and includes a washable foam insert contoured to keep the users arm in the proper position. The unit can be cut to the desired length. OPTIONS: An extra pair of foam elevating inserts ($18.95). DIMENSIONS (LxW): 22 x 4.5 inches. COLOR: The foam is light beige.
Sammons Preston Geri Chair Side Support
The Geri Chair Side Support is a lateral trunk support designed for use with individuals with balance disabilitieis. Intended for use in geriatric chairs, the unit is hinged for use in reclining chairs. Made of closed-cell foam, the support can be modified with an electric knife, can be used on the right or left side, and is secured by attached wrap-on material. The support can be used only on one side or on both sides. OPTIONS: Short or long torso support insert and hook-and-loop attachment str
Sammons Preston Modified Deluxe Wheelchair Arm Tray (Model A74612)
The Sammons Preston Modified Deluxe Wheelchair Arm Tray, model A74612, is an arm trough designed for use by individuals who use wheelchairs. Features include a cut-away attachment base designed to allow access to wheelchair brakes while supporting the full length of an arm. The tray can fit either a standard or desk arm chair, and can be used on either the right or left side. Kushionflex padding for comfort and protection is included. DIMENSIONS: The padding is 1/8 inch thick.
Sammons Preston Molded Clear Lap Tray (Model A7073)
The Sammons Preston Molded Clear Lap Tray, model A7073, is a tinted translucent lapboard designed for use by individuals who use wheelchairs. This tray enables the lower extremities to be completely visible. Made of high-impact Lexan, the tray features a molded rim and a recessed space for cups, glasses, bottles, or cans. The tray is equipped with D-ring hook-and-loop straps on the arms and a snap-buckle back strap that fastens on either side of the chair. The arm and back straps attach by threa
Sammons Preston Open-Cell Carve-It Foam
Sammons Preston Open-Cell Carve-It Foam is foam material designed for creating custom supports to reduce pressure, decrease edema, manage contractures, and reduce pain through better positioning. This firm-density, fire-retardant foam can be cut with an electric knife and can be used to create sidelying wedges, knee separators, arm troughs, pelvic blocks, heel protectors, cervical supports, and more. DIMENSIONS: Available in blocks of 5 x 16 x 16 inches, 7 x 23 x 23 inches, or 14 x 23 x 23 inche
Sammons Preston Solid Seat Insert
The Sammons Preston Solid Seat Insert is designed for use in wheelchairs with sling seats. This semi-rigid closed-cell foam insert provides a firm, flat seating surface in sling seats. This surface also helps improve posture by helping to balance the pelvis and distribute weight over the hips and thighs. This insert is available in standard, narrow, or relaxed-fit styles. DIMENSIONS (WxD): The standard model is 18 x 16 inches, the narrow model is 16 x 16 inches, and the relaxed-fit model is 20
Sammons Preston Universal Wheelchair Arm Tray (Model A7468)
The Sammons Preston Universal Wheelchair Arm Tray, model A7468, is an arm trough designed to position and provide arm support for individuals with upper extremity disabilities who also use wheelchairs. The trough features a plastic base that slides over the arm pad of standard or desk-length wheelchair arms and is designed for either the right or left side use. A Kushionflex pad is included to protect potential areas of irritation. The tray requires no tools for installation or removal. .DIMENSI
Sammons Preston Wheelchair Elevating Arm Tray Kit (Model 6461)
The Sammons Preston Elevating Arm Tray Kit, model 6461, is an elevating armrest designed for use by individuals who use wheelchairs. Designed to fit most standard or desk armrests, this plastic tray fastens to the armrest of wheelchairs with a double D-ring Velcro Velstrap. The tray elevates to 25 degrees and can be mounted for either right or left side use. A heat gun can be used for customization. Bolts are included for elevation. DIMENSIONS (LxW): 22 x 4.5 inches. Double D-ring Velcro stra
Sammons Preston Wheelchair Foot Support (Model A7481)
The Wheelchair Foot Support, model A7481, is a foot support designed for use by people with weak, flaccid or hypertonic lower extremities who use wheelchairs. It positions the foot in proper anatomical alignment to assist in the prevention of ankle contractures. The foot portion effectively eliminates the need to continually reposition the foot and prevents feet from slipping off the wheelchair footrest. Made of rigid plastic, the support is covered to help prevent forward slippage and attaches
Scallop Seat
Scallop Seat is designed to aid in floor sitting and to add extra support while sitting on a chair. Lightweight, portable, and versatile seat is a perfect aid to enable participation in everyday activities with comfort, support, and ease. Allows users to move while being seated and supported. Provides stability without preventing movement. Can be used with a wide variety of chair styles to add extra support while sitting. Simple design is made up of a flexible shell that helps reinforce balance.
Schaeffer Abduction Pillow.
The Schaeffer Abduction Pillow is a leg abduction positioner designed to maintain the legs in the desired position. The large foam wedge fits between legs and adjustable foam straps secure the wedge to the user's legs. The set also includes a pair of detachable cradle boots (see also separate entry) to protect and position feet. This device enables the user to be turned to 90 degrees to prevent sacral pressure sores. SIZES: Medium only. DIMENSIONS: 23 x 14 x 4 x 7 inches.
Schukra Adjustable Backrests
The SCHUKRA Adjustable Backrest is a back support cushion designed to help ease back pain. Providing threefold support in the pelvis, lumbar and upper body regions, this support aid adjusts to fit the user's spinal column while sitting. Adjustments are made with a small dial found at the bottom-side of the cushion. With its compact design, it can be used in the car, home or office. COLOR: Variety. WARRANTY: Lifetime - for the original purchaser.
Scooter Armrest Extensions
CUSTOM ADAPTATION PURPOSE: To assist an individual with mobility disabilities in transferring from a scooter. The existing scooter armrests were altered so they can be moved forward to provide a point of support in front of the user during transfers and moved back at other times. The armrests are mounted on hollow square tubing, into which long slots, rather than single holes, were cut. The arms slide along the slot into the forward position for standing transfers and backward for standard use
Scottie Seating Systems
Modular seating components ($246 to $3) for custom built seating systems for wheelchairs. Allows adjustments necessitated by growth or neuromuscular control changes. Insert ($511 to $297) is compatible with variety of wheelchair frames and can be easily removed without tools for transport. Quick release swingaway abduction pommel. Velcro restraint strap. Basic insert sizes: child, narrow adult, adult, large adult. Accessories: headrest bracket, lateral support, hip support, vest, body straps, s
Seat And Back Mounting Hardware, Drop Hooks, Drop Hook Stops, Back To Seat Brackets
Complete line of seating hardware for mounting backs, seats, lateral trunk supports, abductors, headrests, leg and footrests in wheelchairs and other mobility bases. Adjustable and non-adjustable, knob-release and drop hook styles. May be ordered in complete kits or by individual components. Optional components $93.00 to $2.00.
Seat Belt Kit
The Seat Belt Kit is a wheelchair seatbelt designed for use with the Otto Bock MOSS II seating systems (see separate entries). The kit consists of webbing with a plastic side-release or push button-style buckle. DIMENSIONS: 1.5 and 2 inch widths.
Seat Board.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Eliminates the sling effect from a wheelchair sling seat, provides a solid seating platform. Diagram and direction for making a wooden seat support for a wheelchair. the board should be placed between, not on, the rails to which the seat is fastened. Similar to commercially available product. SKILLS REQUIRED: woodworking AUTHOR: Gavee, B. TITLE: Wheelchair and Accessories REF: Book: Accent Press, Bloomington, IL; p 45. NARIC CALL NUMBER: R0848. 1981.
Seat-To-Back Brackets
The Seat-to-Back Brackets are stainless steel brackets designed for rigidly attaching a solid seat and back to each other at 80-degree (model BS-6080), 85-degree (model BS-6085), 90-degree (model BS-6090), 95-degree (model BS-6095), or 100-degree (model BS-6000) angles.
Seat2Go
Seat2GO is a floor seat designed for children who need extra support while seated. Contoured seat prevents user from sliding forward. Improves seating posture. Features 95 degree seat to back angle and double strap trunk support and belt.
Seat2Go (Models Crs 2000 & 3000)
Seat2Go is a floor sitter and positioning seat designed for use by children with balance, neurological, or severe physical disabilities. This soft support has a contoured seat that prevents the child from sliding forward and improves seating posture. It can be used on the floor, in a chair, or as a stroller insert. Features include a 95-degree seat to back angle, double strap trunk support and belt, and fastening straps to secure the seat to any other chair and that store in the back pocket when
Seating Hardware
Seating Hardware is designed for use with wheelchairs. This hardware is made of steel and includes 90-degree brackets and J-hooks (sold separately). DIMENSIONS: All hardware has 0.5-inch spacing, COLOR: Black.
Seating Hardware
Seating Hardware are components for seating systems that include: 7 types of head and neck supports, 5 models of outer pommel supports, 2 inner pommel support, anterior stop bars, 10 footrest bracket options, 25 suspension hook options, slide brackets, strap hooks, tray brackets, 2 types of headrest hardware, single end button locks, removable lateral hardware, laterals, box seat hardware, solid seat and back brackets, solid seat and back hinges, kids seat bracket, and a drop away pommel.
Seating Support
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To create a custom adapted seating support for a child with dystonic cerebral palsy. When sitting in a chair, the child pushes his pelvis forward and becomes uncomfortable, and the child concentrates more on sitting than on his books, crafts, and other activities. The family attempted to remedy the seating issue by adding a two-piece insert, the commercially available “tomato seat;" however, this device did not secure properly to the chair. The child
See-Thru Work Tray (Model Nc94102)
The See-Thru Work Tray, model NC94102, is a lapboard designed to provide a work, eating, and activity surface for people who use wheelchairs. The clear tray is made of polycarbonate and bordered with an all-aluminum lip on the front and sides. The tray has a hook and loop straps that attach onto wheelchair armrests. DIMENSIONS (WxD): 23.5 x 19 inches. The width of the oval space in front of the user's stomach is 15 inches.
Self-Assisting Belt (Model 4220)
The Self-Assisting Belt, model 4220, is a wheelchair seatbelt designed to reduce siding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of heavy-duty nylon, this machine-washable belt is equipped with an airline-style buckle. DIMENSIONS: Fits hips up to 60 inches.
Self-Assisting Belt (Models 4228 & 4228L)
The Self-Assisting Belt is a wheelchair seatbelt designed to reduce sliding in wheelchairs. This belt attaches to a wheelchair or geri chair using a slide buckle. Made of polypropylene webbing, this machine-washable belt is equipped with Velcro closure. DIMENSIONS: Model 4228 fits hips up to 42 inches and model 4228L is extrsa-long to fit hips up to 62 inches.
Sensory Vibrating Lap Pad
The Sensory Vibrating Lap Pad is designed for individuals ages 3 and up with Attention Deficit Hyperactivity Disorder, sensory processing disorder and autism to provide them with soothing vibration and sensory input. Soft with bumps for tactile exploration. Features pocket to stash fidgets or tuck hands inside. Place across lap, back or stomach to help calm and focus. Use with adult supervision.
Shane’s Neck Brace
Shane’s Neck Support Brace is designed to keep a user's head in an upright position without degrading the muscle tone from restricted movement. Made of flexible synthetic tubing, Shane’s Neck Brace: allows the head full range of motion with 360 degree support as needed; can be used for many neck conditions or injuries, and can help improve one’s posture and aid with balance and neck fatigue; is completely waterproof; comes in three adjustable sizes; is endorsed for several conditions by doctors,
Shoe Holders
Molded plastic shoe holder in 4 sizes, 2 1/2 to 5 3/4 inches wide by 5 1/2 to 11 inches long. 1-inch nylon adjustable velcro straps at instep and toe. Hardware for bolting to footplate included. Replacement straps, pads for straps, and brackets for Motion Designs chairs available.
Shoe Holders
Molded ABS plastic shoe holder with padded ankle strap and forefoot strap. Attach to footplate with screws. Also available in extra heavy duty model. Sizes: Small 4 1/2 inches long by 3 inches wide, Medium 6 inches long by 4 inches wide, Large 8 inches long by 4 1/2 inches wide, and X-Large 9 1/2 inches long by 5 inches wide.
Shoe Holders (Models 30101S, 30101M, 30101L, 30102S, 30102M, & 30102L)
Shoe Holders are foot positioners designed for use by individuals who use wheelchairs. Made of Haircell plastic with nylon straps with quick-release plastic buttons, these shoe-shaped positioners ensure proper positioning of the feet. The 30101 models have one-inch on center mounting holes. The 30102 models do not have mounting holes. SIZES: Both the 30101 and 30102 models are available in small, medium, and large. DIMENSIONS (WxL): The small holders are 4.3 x 6 inches. The medium holders are 4.
Shoulder Harness
The Shoulder Harness is a padded shoulder support with 1 or 2 inch webbing designed to be mounted to lateral trunk support pads with cam buckles or H-style mounted to a seatbelt.
Shoulder Pommels (Model 6670)
The Shoulder Pommels, model 6670, are shoulder and neck supports designed for individuals who have a tendency to lean to one side. The pommels are constructed with a bottom channel so that the shoulder straps can be pulled through for attachment. The supports are made of vinyl coated foam with an outer reinforcement. DIMENSIONS: Single is 5 x 4.5 inches; the Double is 10 x 4.5 inches and curved to fit the shoulder. COLOR: Casa tan or black.
Shoulder Retraction Straps & Solid I Back Mount (Model 106-2000)
Shoulder restraint straps, 1 inch neoprene foam padded sleeve. Quick release side buckle. Multiple top mounting locations for proper contact angle over shoulder. Adjusts for different clothing. Mounted on solid I back. Sizes: small for 9 to 14 inches sitting height, medium for 14 to 20 inches sitting height, large for 20 to 28 inches sitting height.
Shoulder Retractors (Model Sr20)
Shoulder Retractors (model SR20) are malleable vinyl-coated pads on swingaway hardware designed to aid in trunk support of seated individuals. They will mount to aluminum pans or other rigid back panels.
Shoulder Stabilizers
The Shoulder Stabilizers are stainless steel shoulder supports designed for positioning and controlling the upper extremity shoulder girdle, and dealing with trunk flexion or rotation problems. The adjustable hardware (included) allows height, forward/backward, and lateral adjustment. The supports are padded with closed cell foam and upholstered with neoprene-backed nylon terry cloth. SIZE: Adult (model ASRA) and pediatric (model ASRP). COLOR: Black upholstery.
Shoulder Straps, Cinch Straps, Shoulder Supports
Pair of 2 inch velcro shoulder straps, to mount to front pads of swing away trunk support system or as replacement straps on a vest. Top of straps mount to solid back with D-rings or buckles. Can also be used for cinch strapping a basic seating insert to a wheelchair frame if specified when ordering. Shoulder supports consist of one pair of angled pads made with medium density foam over a Kydex form and attached to velcro shoulder straps. Smaller size available on request.
Side Thoracic Support And Hardware (Models 434P1, 434F1, 434F2, & 434F3)
The Side Thoracic Support and Hardware is a trunk support pad with mounting hardware for either lateral or side support designed for wheelchair users. An extruded aluminum clamp attaches to the back frame of the wheelchair. It has a passive locking system which may be disengaged, and allows the pad to swing away for easy transfer. Contoured support pads are injection molded foam with semi-flexible steel reinforcement, and can be shaped as needed. Hardware may be ordered for the left or right sid
Sidehugger Back Cushion
The SideHugger Back Cushion is a back support cushion designed for use by individuals with mobility disabilities. The cushion attaches directly to the existing wheelchair back and hugs the user when leaned against, encouraging the user to position him/herself using the built-in lateral supports. DIMENSIONS (WxH): Standard and tall models are available for 16-, 18-, and 20-inch chairs.
Sidelyer Strap, H-Straps, & Pelvic Strap
The Sidelyer Strap, H-Strap, and Pelvic Strap are restraint and positioning belts designed for use in conjunction with the large foam positioning shapes by the manufacturer (see separate entries). The straps are fabricated of Evazote foam for cushioning ithout bottoming out. The Sidelyer Strap is designed to support the body in proper alignment when positioned on its side. It comes in Adult and Child models, both available with a hole for a gastrostomy tube. The H-Straps form a harness and are u
Sideminder Wheelchair Back (Models Mdtsm16, Mdtsm18, & Mdtsm20)
The SideMinder Wheelchair Back is a wheelchair back support designed for use by wheelchair users with cerebral palsy, neurological disabilities, or upper extremity disabilities. This steel replacement back features up-and-down and side-to-side adjustments that provide lateral support to prevent leaning to one side. This back adapts to fit non-standard size chairs. OPTIONS: Available with or without lateral supports and headrest. SIZES: Avialable for 16-inch seat (model MDTSM16), 18-inch seat (mo
Signature-Fit Custom Cushion
The Signature-Fit Custom Cushion is a foam in place seating systems designed for use in wheelchairs by people with physical disabilities. The Signature-Fit system uses a portable simulator to capture the contours of the body, correcting anatomical deformities when possible and accommodating others. It measures the contours of the seat and back and transfers this information to a computer. The system enables multiple modifications to be made to the cushion measurements. Pressure relief can be pro
Simulator
Seating simulator for evaluation of persons needing a custom seating system. Can be used to help determine functional seating for modular, molded or mixed systems. Seat to back angle, seat tilt, depth and width of seat, back height, footrests, legrests and armrests can be positioned and corrected as needed to achieve optimal position. .
Sit 'n Place
Sit 'N Place is a pelvic stabilizer designed for use by individuals who use wheelchairs. This stabilizer is intended for wheelchair users who have a tendency to slide forward in their wheelchairs. Available in a standard and a super model for added support, the unit is placed between the user's legs and a strap extends between the seat and back and down to the anti-tippers to secure the unit. The unit has a flat, comfortable contact surface and the adjustable length and tapered top keep the use
Sit'n Easy Inflatable Back Cushion (Model Ez-1)
The Sit'N Easy Inflatable Back Cushion, EZ-1, is a back support cushion designed to provide proper back support to the lumbar (lower back) area. The cushion is covered in a flocked material and deflates for transport or storage. DIMENSIONS: 15 x 15 inches.
Skate Mesh Ergonomic Chair
The Skate Mesh Ergonomic Chair is an ergonomic chair designed for use to provide back support while working at a desk to reduce back stress. The Ergonomic Chair has a Sub-skating recline mechanism that enables constant contact between lumbar region and chair back. Soft pad adjustable arm rest with pivot. Seat and back adjust simultaneously. Meets or exceeds all ANSI/BIFMA standards.
Skil-Care Removable Wheelchair Lap Trays (Series 7050)
Skil-Care Removable Wheelchair Lap Trays, series 7050, are designed to provide a work and feeding surface and positioning support for people who use wheelchairs. Available styles include a long-lasting Dura-Tray, a clear tray, an Econo-Tray, and a padded SofTop Tray. The SofTop Tray is available in an adult or a child's model. All trays feature straps that secure around the chair with easy-open closures. OPTIONS: Replacement straps. DIMENSIONS: The child's SofTop Tray is 19 x 22 inches.
Skil-Care Resident-Release Nylon Belts (Series 7010)
Skil-Care Resident-Release Nylon Belts, series 7010, are wheelchair seatbelts designed to provide security and positioning assistance for people who use wheelchairs. These belts secure to the wheelchair using the existing screws and are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. DIMENSIONS: All models are two inches wide. The model with the side-release buckle is available in 42 or 54 inches long. The model with
Skil-Care Resident-Release Soft Belts (Series 3012)
Skil-Care Resident-Release Soft Belts series 3012,are wheelchair seatbelts designed to provide security and positioning assistance. These launderable foam padded belts are available with a choice of four closures: Side-release buckles, user-friendly buckles, Velcro, and Velcro with a red hand loop. Foam padded belt easily attaches to wheelchair kick spurs.DIMENSIONS (padded front) (LxW): 24 x 4 inches. Overall length is 81 inches.
Skillbuilders 2-Piece Mobile Floor Sitter
Skillbuilders 2-Piece Mobile Floor Sitter is a modular seating system that allows for a basic Feeder Seat to transform into a floor sitter and a mobile floor sitter. Each seat has built-in abductor, contoured interior for correct seating posture and a safety harness. Seats are made of molded foam that is firm yet soft to the touch, with integral waterproof coating that is easily washed for years of use. 2-piece mobile floor seat set includes seat and mobile box-type base with casters. Base inclu
Skillbuilders Seat-2-Go
Skillbuilders Seat-2-Go is a lightweight padded positioning seat is designed for children that need support while sitting on the floor, at the table or at play. Contoured seat prevents children from sliding forward and improves seating posture (95 degree seat to back angle). Double strap trunk support keeps child securely positioned. In addition, the Seat-2-Go can be used as a stroller insert.
Sleepy Time Headrest
The Sleepy Time Headrest is a head and neck support designed for use by for children with neurological or physical disabilities sitting in car seats. Covered with cotton fabric, this support has a polyester fill that cradles the child's head and neck in all directions, without confining head movement. The Sleepy Time Headrest can be used in car seats, booster seats with backs, infant carriers, strollers, infant swings, wheelchairs, and feeder chairs. SIZES: Infant (for children up to 25 pound
Sliding Headrest Bracket
The Sliding Headrest Bracket is headrest mounting hardware designed for people with neurological or mobility disabilities, spinal cord injury or cerebral palsy. It is added to a headrest on a seat or wheelchair to enable headrest adjustments. This slotted interface bracket allows the headrest to be offset to either side, with infinite lateral adjustment up to 2 inches for an Otto Bock or NE-AT Headrest Bracket (see separate entry). This bracket attaches to the seating system using the existing h
Slim Supports (Models 6322 & 6323)
Slim Supports are lateral trunk supports designed to provide bilateral torso support for people who use wheelchairs or geri chairs. Constructed of plywood and padded foam and covered in wipe-clean vinyl foam, model 6322 fits standard wheelchairs and secures with Velcro straps and model 6323 fits inside the armrests of geri chairs.
Slip-On Neoprene Trunk Lateral Pad
The Slip-On Neoprene Trunk Lateral Pad is lateral trunk support pad designed for people with neurological or mobility disabilities or cerebral palsy. The pad is intended to protect and provide comfort to users of lateral trunk supports. The pad is made of extra thick neoprene rubber, which is cushy, waterproof, and can conform to curves. Each pad can be cut to fit a specific support. The neoprene is bonded on the outside to a stretchy fabric and on the inside to loop Velcro that can fix the pad
Slip-On Portable Cafeteria Bench
The Slip-On Portable Cafeteria Bench promotes social interaction, independent sitting, and self-feeding. The seat can be used at any table in a cafeteria which aids in choice-making and builds self-esteem. *Adaptive Design products are custom-ordered; dimensions and weight capacity will vary with each order.
Slipcasting Board
The Slipcasting Board is a lapboard designed to assist users with limited strength to handle the large, heavy plaster molds that are used for slipcasting. The device consists of a 3/4-inch plywood board with an opening on one side. The user places the board between two chairs and sits on one side. The board surface supports the plaster mold and provides a safer working position to handle the heavy mold. The opening allows the slip to be poured out of the mold and into a bucket which is placed on
Slipos Slim Gel-Fit Metatarsal Pad
The Silipos Slim Gel-Fit Metatarsal Pad is an elastic metatarsal sleeve with gel pad that eases pain under the ball of the foot caused by metatarsalgia, calluses, rheumatism, neuromas or long hours on the feet. The triblock polymer gel pad is infused with medical grade mineral oil that moisturizes and softens the skin while cushioning and padding the ball of the foot. Thin and compact, it is suitable for everyday use and can be used with most dress, casual, or athletic shoes with or without hosi
Smartseat Drop Seat
The SmartSeat Drop Seat is a drop seat base designed for use in wheelchairs. This adjustable platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform. DIMENSIONS: Models are available for 16-, 18-, and 20-inch wheelchairs. The seat can be lowered up to three inches.
Snug Supports (Models 706310 & 706311)
The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs. These supports are placed inside the wheelchair to provide support and reduce lateral leaning. They also serve to reduce the interior space in the chair, adapting a standard chair for the needs of a smaller user. These supports feature a foam-padded plywood frame and a spray-and-wipe clean vinyl cover. Adjustable straps permit attachment to any wheelchair. Model 706310 is a pair of supports and mod
So Soft Deep U Headrest (Model Ssdu100)
The So Soft Deep U Headrest, model SSDU100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs and need to keep their heads positioned upright and centered. This unit has aggressive laterals for maintaining head position, tapered for minimal interference of vision. The headrest has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure reli
So Soft Oval Headrest (Models Sso100S & Sso200L)
The So Soft Oval Headrest, models SSO100S and SSO200L, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The headrest has a contoured shape for lateral support. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and comfort. The headrest comes with a zippered Triptex cover. SIZES: Small (SSO100S) or large (SSO200L). DIMENSIONS: 11 x 5 in
So Soft Quad Headrest (Model Ssq4100)
The So Soft Quad Headrest, model SSQ4100, is a wheelchair headrest and head support designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. The unit is slightly contoured for comfort and positioning. It has a firm foam base topped with a 1-inch layer of visco/memory foam to provide pressure relief and
comfort. This headrest comes with a zippered Triptex cover. DIMENSIONS: 9 x 6.5 inches.
Softspot Low Profile Back Rest (Model 7151Bl)
The SoftSpot Low Profile Backrest, model 7151BL, is a back support cushion designed for use to reduce back strain while sitting for long periods. This polyurethane foam backrest cushions and supports the lower back and spine, reducing strain and fatigue. Its upper edges are curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape and provides support. The surface is non-ab
Softspot Lumbar Roll Backrest (Model 7150Bl)
The SoftSpot Lumbar Roll Backrest, model 7150BL, is a back support cushion designed for use to improve comfort and posture for individuals who sit in a chair for long periods. This polyurethane foam cushion provides direct support for the lumbar region. The upper edges are softly curved to reduce pressure points by gradually tapering away from the back. A center channel prevents pressure points on the spine. The contoured Therasoft material retains its shape to maximize support. The surface is n
Solid Back
Custom size solid back with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and headrest mounting. Custom foams available. Modifications available include curved solid back and I-back cutout. May be ordered without aluminum hardware, or mounted to chair with velcro loops, cinch straps, stationary knob-release hardware, adjustable knob-release hardware, non-adjustable drop hooks, or adjustable drop hooks. Hardware m
Solid Back Insert (Model 75)
The Solid Back Insert, model 75, is designed for use in wheelchairs with sling upholstery and push handles. The insert features a rigid base with a foam liner, a fabric cover, and loops to secure it to the wheelchair push handles
Solid Backs (Models 102-1000, 102-2000, 102-3000, 102-4000, 102-5000, & 102-6000)
Adaptive solid seat backs with 1/2 inch plywood bases, 1/2 inch foam padding and Naugahyde, shelterite or synthetic lambswool covers. Available in any size, with or without mounting hardware. Modifications available include cutouts, extra or special foam, curved back, I-back, wedge cut.
Solid Drop Seat Systems (Models 31642 & 31643)
Solid Drop Seat Systems are solid seat inserts designed for use by individuals who use wheelchairs. The systems include a seven-ply birch solid seat insert and jeavy-duty J-brackets that may be adjusted to raise or lower the seat to achieve proper positioning for the user. The seat features cut out slots to fit around frame crossmembers. DIMENSIONS: The seat insert is 3/8-inch thick. Model 31642 fits chairs with a 16-inch seat and is 13 x 16 inches. Model 3143 fits chairs with 18-inch seats and
Solid Footboard (Model 108-8016)
Solid footrest with fixed or swing away brackets. Waterproof finished birchwood with plastic edges. All sizes. Mounts with 1 inch drop hooks and 30 degree clamps.
Solid I Back Mount Trunk Supports (Model 105-1000)
Lateral trunk support for adaptive positioning. 1/2 inch plywood base with 1 inch neoprene foam padding covered with Naugahyde, shelterlite, or synthetic lambswool pads. Pads are straight, not contoured, with L shaped brackets to allow vertical and horizontal adjustment. Designed to be used with an I Back. Sizes: 4 inches long by 3 inches high, 5 inches long by 4 inches high, 6 inches long by 5 inches high, 7 inches long by 6 inches high. Custom sizes available.
Solid Seat
Custom size solid seat with 1 inch medium density foam on 1/2 inch birch plywood. Upholstered with cover foam and vinyl cover. T-nuts for hardware attachment and abductor mounting. Custom foams available. Modifications available include anti-thrust seat, leg length discrepancy, and built-in abductor. May be ordered without aluminum hardware, or mounted to chair with cinch straps, stationary knob- release hardware, adjustable angle knob-release hardware, non- adjustable drop hooks, or adjustable
Solid Seat (Model Ss1000)
The Solid Seat, model SS1000, is a drop seat for a wheelchair designed for use by individuals with a need for a lower seat due either to a high cushion or who propel the wheelchair with their feet. The Drop Seat is made of durable HDPP and fits most manual and powered wheelchairs. The hole pattern accomodates one-inch mounting increments. Velcro strips are provided to secure a cushion. The hardware adjusts from one-inch above a tube frame to 3 inches below a tube frame. DIMENSIONS (LxW): Avai
Solid Seat And Back
Solid seat and back inserts. Hardwood plywood base with firm foam padding. Naugahyde cover. Various hardware styles and clamps attach units to wheelchair. Customized to fit any wheelchair frame; manual, power drive, travel chair or sport chair. Back insert models: T-back, R- back or with straps.
Solid Seat Insert (Model 94)
The Solid Seat Insert, model 94, is designed for use in wheelchairs with sling upholstery to provide additional seating support. The insert has a rigid base with a foam liner.
Solid Seat Inserts (Models 31640, 31641, 31645, 31646, 31647, & 31648)
Solid Seat Inserts are designed for use by individuals who use wheelchairs. Available in a choice of seven-ply birch wood or paper phenolic with or without a hand hole, these inserts can be used in a standard sling seat to provide support for a cushion or as a base for a custom seating system. DIMENSIONS:Models 31640, 31645, and 31647 are 16 x 16 inches. Models 31641, 31646, and 31648 are 16 x 18 inches. The birch models are 3/8-inch thick. COLOR: Models 31647 and 31648 are black. The other mode
Solid Seat With Adjustable Brackets And Split Collar Clamps (Model 101-4000)
Solid seat, 1/2 inch marine grade plywood with 1 1/2 inches of foam padding, naugahyde upholstery. Brackets allow up to 3 inches of drop or 3 inches of raise in seat, or tilt in seat to accomodate needed angle of hip flexion. Can be fixed or removable depending on placement of the clamps. Seats are cut to fit between the rails.
Solid Seat With Attaching Hardware (Model Ee1) & Solid Back (Model Ee2)
Solid seat and back, 1/2 inch marine grade plywood and 1 1/2 inches of foam padding. Hardware is designed to allow adjustment of seat to back angle, seating depth and flexion. Naugahyde upholstery. Full of cushion is rounded. Custom widths.
Solid Seats (Models 101-1000, 101-2000, & 101-3000)
Adaptive solid seat, 1/2 inch plywood base, 1 to 1 1/2 inch foam padding. Naugahyde, shelterite or synthetic lambswool covers. Any width or depth available. Special modifications available include cutouts, leg length discrepancy, wedge cut, special foam, anti-thrust cushion. Available with or without mounting hardware.
Sorbothane.
Polyurethane energy absorbing elastomer. Safe for prolonged skin contact. Sold in sheets but company will manufacture it in variety of shapes and sizes. Standard size: 12 by 12 inches or 24 by 24 inches, thickness available from 1/10 to 1 1/2 inches. Also sold in various insole products and in various sizes.
Spacer Kit
Spacer Kits are seating hardware designed to be used in wheelchair seating systems. Along with adjustable brackets, spacers are used to space out hooks. For example, a spacer is used when mounting a 14-inch seating system on a 15-inch wheelchair. Spacers are fabricated from a solid piece of aluminum with clearance holes for ##10-32 screws placed on 1/2 inch centers. A Spacer Kit contains one Spacer Block, two ##10-32 x 1 inch Flat Head Socket Drives with Grade 8 screws, and two ##10-32 Nylok Nu
Span+Aids Abduction Pillow (Standard And Economy Models)
The Span+Aids Abduction Pillow is a leg abduction positioner designed to keep the user's legs in the desired position while seated or lying down. This large foam wedge fits between legs and the standard model has wide foam straps for securing legs to wedge; the economy model has adjustable Velfoam straps. These pillows allow the user to be turned 90 degrees to prevent sacral pressure sores. SIZES: Small, medium, or large. DIMENSIONS: The small wedge is 18 x 12 x 4 x 7 inches; the medium wedge is
Span+Aids Abduction Pillow With Comfort Band
The Abduction Pillow with Comfort Band is a leg abduction positioner designed to maintain the legs in the desired position while seated or lying down. The large foam wedge fits between legs and adjustable Velfoam straps secure the wedge to the user's legs. A wide cotton Comfort Band provides additional security. SIZES: Small, medium, or large. DIMENSIONS: The small is 18 x 12 x 4 x 7 inches; the medium is 23 x 14 x 4 x 7 inches; and the large is 25 x 16 x 6 x 7 inches.
Span+Aids Abduction Pillow With Comfort Band & Ulnar Nerve Protectors
The Abduction Pillow with Comfort Band & Ulnar Nerve Protectors is a set of one leg abduction positioner designed to maintain the legs in the desired position and a pair of elbow protectors. The large foam wedge fits between legs and adjustable Velfoam straps secure the wedge to the user's legs. A wide cotton Comfort Band provides additional security. The set also includes a pair of Ulnar Nerve Protector (see also separate entry) and an extra Comfort Band. This device enables the user to be
Span+Aids Abduction Pillow With Contour
The Abduction Pillow with Contour is a leg abduction positioner designed to maintain the legs in the desired position while seated or lying down. The large foam wedge fits between legs and features contoured leg channels. Adjustable Velfoam straps secure the wedge to the user's legs. SIZES: Small, medium, or large. DIMENSIONS: The small is 18 x 12 x 4 x 7 inches; the medium is 23 x 14 x 4 x 7 inches; and the large is 25 x 16 x 6 x 7 inches.
Span+Aids Abduction Pillow With Contour & Comfort Band
The Abduction Pillow with Contour & Comfort Band is a leg abduction positioner designed to maintain the legs in the desired position while seated or lying down. The large foam wedge fits between legs and features contoured lag channels. Adjustable Velfoam straps secure the wedge to the user's legs. A wide cotton Comfort Band provides additional security. DIMENSIONS: 27 x 17 x 4 x 6 inches, 23 x 14 x 4 x 7 inches, or 20 x 19 x 7 x 7 inches.
Span+Aids Wheelchair Abduction Pillow
The Wheelchair Abduction Pillow is leg abduction positioner designed to maintain the legs in the desired position while the user is in a wheelchair. The foam wedge fits between legs and features contoured leg channels. Adjustable Velfoam straps secure the wedge to the user's legs. DIMENSIONS: 8 x 6 x 12 x 7 inches.
Special Tomato Adjustable High Chair
The Special Tomato High Chair features an adjustable, hardwood seat and footrest, enabling the chair to conform to the needs of a growing child. The optional padded cushions for the seat and contoured backrest are made of Soft Touch brand, wipe-clean, seamless material. The high chair also features an optional tray for trunk stabilization, as well as feeding.
Spine Align
The Spine Align is a lumbar support cushion designed to be used as a lower back support for people with chronic sitting pain or who must sit for long periods at a time and who require additional support at the lumbo sacral curve. The cushion features a convex back, a soft center channel and a moisture resistant Cordura nylon cover. The portable cushion attaches with Velcro straps to a wheelchair, car seat, or office chair. DIMENSIONS (HxWxD): 5 x 13 x 2.25 inches thick at the center. WEIGHT: 5 o
Spine Ease Deluxe Massage Pillow (Model Sp-1)
The Spine Ease Deluxe Massage Pillow, SP-1, is a vibrating lumbar support cushion designed to reduce lower back discomfort. This portable pillow can be used anywhere - in the home, office, or car. POWER: Battery operated on 2 "D" batteries (not included). DIMENSIONS: 14.5 x 15 inches.
Spine Reliever Back Support Bed Wedge
The Spine Reliever Back Support Bed Wedge is a backrest designed for use by individuals with back pain, weakness, or injury. This wedge is topped by memory foam that contours to the user's body and enables the user to sit upright in bed or use it in two reclining positions. An adjustable neck roll is included.
Square Modular Seating System
The Square Modular Seating System (model 30-1060) is a youth positioning chair for neurologically impaired children. The brightly colored chair is made of foam and covered with a urine proof, stain and odor resistant, non- toxic material that is cleanable with a damp cloth. An 8-piece shape set is available to assure a secure fit. The additional shape set (model 30-1061, $225) consists of 4 rectangles, two triangles, one ring, and one disc. DIMENSIONS: Seating module measures 20 x 20 x 11 inches
Standard And Trisectional Lumbar Cushions
The Standard and Trisectional Lumbar Cushions are back support cushions designed to provide support for those who must remain seated for long periods. The Trisectional Cushion is designed with an elevated center to provide support in three planes: vertical, lateral, and direct lumbar area. The standard cushion has a full contour without an elevated center. A washable cover is standard on both models. Both models are available with or without a Masonite insert for rigid support and a securement s
Standard Comfortline Armrest Series
The Standard Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests have foam padding covered in molded satin vinyl and are available in fixed or flip- away models for both right and left wheelchair arms. These armrests feature a molded cup holder recess. DIMENSIONS (WxD): 9.5 inches wide at the widest point, tapering to 8 inches x 22 inches. The armrests have a .5-inch thick wood base
Standard Curved Padded Headrest (Model Hrc100)
The Standard Curved Padded Headrest, model HRC100, is a wheelchair headrest designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and other people who use wheelchairs. It has a contoured U shape for positioning, and foam padding with a zippered Triptex cover. DIMENSIONS: 11 x 4 inches. Padding is 2.5 inches deep.
Standard Viewline Plus Armrest Series
The Standard Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. The armrests are fabricated of transparent, unbreakable, scratch-resistant polycarbonate and are available in fixed or flip-away styles for both right and left wheelchair arms, and are available in armrest only or armrest with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 9.5 inches wide at the widest point, tapering to 8 inches. COLOR: The plas
Standard Woodline Light Reversible Armrest
The Standard Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest comes standard with a clear lacquer finish and is designed to be assembled by the user in either a right or left configuration. Model 31326 is a fixed armrest and Model 31328 is a flip-away style; all necessary mounting hardware is included with both models. DIMENSIONS: 3/8 inch thick x 22 inch
Stealth Comfort Plus Headrest (Models Asl909 & Asl910)
The Stealth Comfort Plus Headrest, models ASL909 & ASL910 are wheelchair headrests designed for use by individuals with mobility disabilities. The large padded headrests come with fixed mounting hardware. Padded with dual layers of premium foam, these headrests come with a plush slip-on Darlexx cover. They have metal backs and come with half-inch square Otto-Bock style headrest hardware. OPTIONS: Flip-down headrest hardware (model ASL617); adjustable/removable headrest hardware (model ASL623
Stealth Elite Headrest (Model Sm-Se210)
The Stealth Elite Headrest, model SM-SE210, is a headrest designed for use by individuals who use wheelchairs. This headrest is intended for individuals who do not need a midline cue. The two lateral swing-away components can be used for switch mounting and if a sensor is added in the backpad, it can also be equipped for computer access.
Stealth Ultra Headrest (Model Sm-Su200)
The Stealth Ultra Headrest, model SM-SU200, is a combination wheelchair headrest and switch mounting hardware designed for use by individuals with severe physical or neurological disabilities or spinal cord injury. The sub occipital component aids the user in finding the midline. The two lateral swing-away components can be used for sensor mounting and a sensor can also be mounted in the backpad.
Steel Channel Bracket Attaching System (Model 30300)
The Steel Channel Bracket Attaching System, model 30300, is lapboard mounting hardware designed to secure armrest-style trays to wheelchairs. This heavy-duty steel bracket includes all required mounting hardware for attaching to a tray (not included) and enables a tray to slide on to the armrests from the front. This flip-away bracket fits standard wheelchair armpads and permits chair entry and exit without removing the tray. DIMENSIONS: Fits 1 1/8-inch high standard pads. WARRANTY: This product
Sternal Support System
The Sternal Support System consists of sternal support pads, available in two sizes for children and two sizes for adults. They are made of self-skinning urethane foam. The small and medium sizes are a broad flat pad, the intermediate and large sizes is extended into an X configuration. The harness strap attaches four corners of the pads to the four corners of the back of the wheelchair. The strap kit is $13 to $8.75; the pads are $30.50. DIMENSIONS (WxH): The Child size is 6 x 3.781 inches; Sma
Stimulite Slimline Cushion
The Stimulite Slimline Cushion is a foam seat cushions designed for use in wheelchairs. This cushion is made of three layers of honeycomb material, each with a different stiffness for pressure relief and force reduction. The open-cell honeycomb is perforated to permit air circulation and moisture evaporation. The cushion is machine washable and dryer safe. The cushion is available with a flat or sling bottom and with a polyester or sheepskin cover. DIMENSIONS (WxD): 14 x 16, 16 x 16, 16 x 18, 18
Straighten Up Posture Aid
The Straighten Up Posture Aid is for persons with a back injury, a disease, condition, or upper extremity disability that causes poor posture. This device helps these persons, retrains, realigns and relaxes the wearer to avoid slouching, hunching and stress. Special sizing.
Straighten Up Posture Aid
The Straighten Up Posture Aid is a back and shoulder brace designed for office workers, travelers, video gamers, students, breast-feeding mothers and golfers,or for individuals with slouching, hunching, and more debilitating conditions, like Osteoporosis. Product retrains, realigns and relaxes the wearer to avoid slouching, hunching and stress.
Stroller Insert.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A solid seat insert for the over-sized strollers with fabric seats. A wooden solid seat and back are built to rest on the metal rails of the stroller. It's covered with foam and an abductor block is attached to the front of the seat. The back can be flat or have angled side as scapular bars. Trunk supports and side blocks can be added if needed. Cover with vinyl. Includes pictures and drawing. SKILLS REQUIRED: Woodworking. AUTHOR: Adrienne Bergen TITLE
Subasis Bars
The Subasis Bars are pelvic stabilizers designed to control posterior pelvic tilt, increased hip extensor activity resulting in thrusting, and/or reducible pelvic obliquity. The aluminum bar is padded with neoprene rubber and upholstered with neoprene rubber backed nylon terry cloth. The bars are available without mounting hardware (model SR-1000) or with three different mounding systems: The Bolt-On Assembly (model ASSB) is designed to be mounted to the bottom of a plywood or plastic seat board
Sunbeam Supportive Rocking Infant Chair
The Sunbeam is a rocking infant chair designed for use by children with limited mobility strength and coordination. It offers an adjustable back angle and tilt in space feature. A large tray area allows the Sunbeam to be used as a functional seat as well as a feeding chair. The chair can also be supplied with a height adjustable base and a range of matching accessories.
Sunmate Orthopedic Foam
SunMate Orthopedic Foam is foam material of high density open cell elastomeric foam of 5 pound/cubic foot density, with high impact absorption qualities. This foam contours slowly to give uniform pressure distribution and soft springback and is available in extra soft, soft, medium soft, medium, medium firm, firm, and hard densities. DIMENSIONS: Sold in sheets of 16 x 37 inches, 32 x 37 inches, or 37 x 82 inches in a choice of .25, .5, .75, 1, 2, 3, or 4 inches thick.
Super Star Cushion (Models 3032 & 3033)
The Super Star Cushion, models 3032 & 3033, is a foam seat cushion designed for use by less active wheelchair users who require moderate to high lateral stability and moderate to high pelvic and leg support. This cushion is composed of high resiliency polyurethane and visco foam layers built around an aggressive internal ischial and lateral wedged structure that provides forward and rearward pelvic stability and leg positioning. The internal wedged design provides additional trochanteric sup
Support Chair Adaptation Of The Koala Corner Chair
CUSTOM ADAPTATION PURPOSE: To provide a customized, stable seating and positioning device for a child with cerebral palsy. This device was adapted from a previous adaptation “The Koala.” The Koala is a pedestal seat with a winged back, and is generally used with a seat cushion and pelvic belt. It comes with a large adjustable-height table, which has lipped edges to stop objects from falling off, and latches into position behind the back edges of the seat. The version used by the child with cere
Support For Drooping Head.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: A pulley device to assist holding head erect for persons with degenerative disease of the central nervous system. A three foot wooden ski tip has a slot cut in the tip and a stationary pulley is mounted on the back of the ski. The ski is installed vertically in the middle of the back of the wheelchair by use of U-shaped metal clamps which fasten the ski to the back upholstery of the chair. a smaller pulley is attached at midline about 6 inches below th
Supportpro Complete Seat
The SupportPro Complete Seat is a drop seat base with a foam or gel and foam seat cushion designed for use in wheelchairs. The unit comprises a SmartSeat Drop Seat with a SupportPro Cushion. The adjustable seat platform allows the wheelchair seat to be lowered and the angle adjusted to enable the user to propel the chair using his/her feet. The high-strength molded platform attaches to the chair with steel hooks and stabilizer straps that connect under the chair secure the platform. A SupportPro
Swimming Noodle Pieces To Prevent Injury
---- “DO IT YOURSELF” ENTRY --------- PURPOSE: To create a light weight, easy to carry foam noodle pieces to protect a child with myoclonic jerks from injuring his- or herself during shopping trips. Using a swimming pool noodle; cut the noodle into sections which can cover the metal areas of the shopping cart. These pieces are easy to construct, light weight, and easy to carry while protecting the child from injuring themselves in the shopping cart. MATERIALS: Swimming pool noodle. TOOLS: Cuttin
Swing Away Pivot Lock, Back Bar Mount Trunk Support (Model 105-3000), & Swing Away Pivot Lock Solid I Back Mount (Model 105-4000)
Trunk support component for adaptive positioning. 1/4 inch contoured ABS plastic base with separate removable pads. Positive locking pivot mechanism. Wide range of vertical, horizontal and front to rear adjustment. Pads can be oriented to body to minimize undistributed pressure. Back bar mounts attach to back frame of wheelchair, Solid I Back Mount attaches to solid back insert with special bracket. Sizes: small 3 inches high by 6 inches long, medium 3 inches high by 7 inches long, large 4 inche
Swing Away Trunk Supports And Brackets
Two pairs of custom size pads and one pair of custom bent swing away Kydex brackets with hinges. Slotted brackets are secured onto solid back with bolts through threaded wood inserts, with adjustment for width, or clamp onto back uprights of wheelchair. Supports wrap around trunk and secure in front with velcro strap. Can be ordered with 2 hinges, for stationary rear pads, or 4 hinges, for greater ease of transfers. Pads are 1/2 inch thick medium density foam and 1/2 inch birch plywood. May be o
Swing Away Trunk Supports With Locks
Two pairs of custom size pads and one pair of custom bent swing away Kydex brackets with spring loaded aluminum locking mechanisms. Slotted brackets are secured onto solid back with bolts through threaded wood inserts, with adjustment for width, or clamp onto back uprights of wheelchair. Supports wrap around trunk and secure in front with velcro strap. Locking mechanisms allow rear pads to lock into a stationary position for support while front pads are able to swing open. When unlocked, all fou
Swing Open Locking Trunk Supports And Brackets
One pair of custom size pads and custom bent Kydex brackets with spring loaded aluminum locking mechanism. Pads swing away for transfers when released, and lock securely. Secured to solid back with bolts through threaded inserts. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood.
Swingaway Lateral Supports
Lateral supports that can be mounted on LaBac Systems sliding back, on chairs with upholstery mounted on the front of the back posts, and on chairs with upholstery mounted on the back of the back posts. Swingaway feature offers quick client access. Pads available in 3 by 4 inches, 4 by 4 inches, 4 by 5 inches, 4 by 6 inches. Made of molded plastic shell with foam pad. Naugahyde cover. Additional intermediate brackets available.
Swingaway Lateral Trunk Support (Models 31425, 31423, & 32492)
The Swingaway Lateral Trunk Support is designed to provide positioning support for people who use wheelchairs.Model 31425 is a Swingaway Kit with Pad and includes tapered L brackets, a swing-away hinge, an extender, all mounting hardware, and the support pad. The brackets can be arranged in a variety of configurations for flexibility and growth. The extender bracket permits extra flexibility in any direction. The supports flip out of the way while entering and exiting the chair and they have sin
Swivel Tube Assembly (Parts 1501, 1501-01, 1502, 1502-01, 1503, 1503-01)
The Swivel Tube Assembly is interface hardware designed for positioning a wheelchair headrest. The Swivel Tube Assembly attaches to the recessed area of the headrest. OPTIONS: A custom made Swivel Tube Weldment is available. DIMENSIONS: Available in 4-, 6-, or 10-inch lengths. COLOR:Both the original and the custom made options are available in black and stainless steel.
T Mods (Mod J)
Solid back insert modification for any Freedom Design solid backs. Backs are cut in the shape of a "T" to permit maximum adjustability of trunk supports. Only works with Econo-Ease Hardware.
T-Foam
T-Foam is a foam material designed to eliminate pressure points and absorb shock and vibration. This material is used to make flotations pads, mattresses, cushions, and padding (see separate entries). T-Foam flows to give fluid-like fit and support under body presure and heat so that pressure is evenly distributed. This material becomes firmer when subject to sudden impact and absorbs up to 90 percent of sudden impacts and vibration. When released after conforming to an impression, T-Foam return
T-Gel Plus Solid Seat Insert Cushion
The T-Gel Plus Solid Seat Insert (SSI) Cushion, models 1294 and 1295, is a combination cushion utilizing the Alimed Solid Seat Insert and a dry flotation T-Gel Plus Cushion (see separate entries). The cushion is intended to correct positioning of individuals in nsling seat style wheelchairs by providing a flatter sitting base. This semi-rigid base is 3.5 inches thick and creates a more stable sitting surface. DIMENSIONS:16 x 16 inches (no. 1294) or 16 x 18 inches (no. 1295).
Tarsalrest Adjustable Foot Support (Model Fr19Aj)
The TarsalRest Adjustable Foot Support, model FR19AJ, are foot supports ergonimcally designed to support proper posture, reduce fatigue and back strain and relieve stress on legs, back and neck. The tilting support platforms allow the user to vary leg positions and aids in circulation in legs and feet. The extra height with this support is ideal for any one who works on a stool or high chair. The adjustability makes it versatile for different environments or tasks. The non-skid platform is rubbe
Tarsalrest Foot Support (Model Fr19 & Fr19X)
The TarsalRest Foot Support, models FR19 and FR19X, are a foot supports designed to promote proper posture, reduce fatigue and back strain, and relieve stress on the legs, back and neck. They are ideal for providing circulation in the legs and feet. These foot supports feature a chrome frame that is durable and lightweight, a non-skid platform surface that won't damage shoes, and a tiliting support platform that allows users to vary their leg position. DIMENSIONS: Two models available in 3 or 6
Tech Table
Tech Table is a lap tray designed for use by individuals who use wheelchairs or scooters. The unit features a zippered Cordura nylon case with straps with buckles to secure it to the wheelchair, a handle for transfers, and a removable, wipe clean ABS plastic top that is suitable for reading, writing, dining, and recreation. The padded, foam-lined storage area under the top features five organizer pockets and accommodates books, files, pens, wallets, calculators, etc. The case includes two straps
Teddy Bear Mats
These Teddy Bear Mats are mats for physical therapy patients or users to tumble on. The Teddy Bear Mat can be used in replacement of traditional sting mats or throw mats. The Teddy Bear Mat goes at the top of any stack of mats, so plopping and falling can be fun. Using it along with other mats helps the user feel safer and more confident. Not intended for use on hard surfaces.
Teddy Tucker Infant Seat Liner
Teddy Tuckers Infant Seat Liner is a cushion support designed to work in most any type of infant seat. It is also designed to help support and cuddle the baby's total body and to protect it from hot or cold surfaces. This infant product is machine washable and is available in the following type of designer cushions: Teddy bear, panda, duck, lamb or clown. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.
Temp Back Supporter & (Models 5311, 5321, 5341, & 5301) & Half Back Wedge (Model 54000)
Contoured lower back support with cutout for hot or cold pack insertion. Velcro closure. Polyurethane foam. Washable corduroy covers. Loop fasteners for chair mounting. Available with or without: hot pack; cold pack; hot and cold pack. Black, Navy, Grey, or Turquoise. Half- back wedge is 12 by 14 inches. Navy.
Temper Foam Sheets
Temper Foam Sheets are foam material designed for a variety of othotic, prosthetic, and rehabilitative applications. This lightweight foam flows under pressure to a fluid-like support that distributes weight evenly to reduce pressure points.It also softens under pressure, temperature increase, and/or humidity and transfers moisture away from the body. Highly resilient, the foam slowly returns to its original form after compression, thus reducing back pressure. The foam available in soft, medium,
TFH Resonance Cushion (Model 9Rscn)
The Resonance Cushion, model 9RSCN, is a vibrotactile amplification system designed for use with children and adults with neurological, emotional, or cognitive disabilities. This cushion can be used in a standars chair or a wheelchair and features a built-in amplifier with cables to connect to the television or a stereo system rated from ten to one hundred watts of power. DIMENSIONS (HxWxD). 18 x 13 x 4 inches.
The Hugster
The Hugster is a pillow designed for a variety of uses such as nursing, pregnancy, infant support, TV/reading, sleeping and back support. It is horsesoe shaped with a velcro fastener that hugs the user. This pillow is made of 100% polyester filling with a cover that is 100% cotton.
Thera-P-Back Cushion
The Thera-P-Back Cushion is a lumbar cervical support designed for use by individuals with lower back and neck pain. This cushion is fully adjustable and designed to help eliminate lower back pain and neck pain while at home, in a car, or at the office. One side is shaped to provide support to lumbar area, and the reverse side is to provide support and comfort to the neck. Features include adjustable Velcro straps and a reusable hot/cold compress. The entire cushion can be micro-waved or place
Therapeutic Pillows
Assorted cushions for lumbar or cervical support. Lumbar cushion with saddle hug wings or inverted edges, fits bench or bucket seats. Small dorsi-lumbar cushion 15 by 15 inches square. Large dorsi-lumbar cushion 15 by 19 inches. Lumbar cushions are firm foam with velvet covers. 21 inch twin lobe cervical pillow with smooth or convoluted texture, medium soft foam. Cervical roll 18 by 6 1/2 inches, medium soft polyester fiber. Zippered covers. Assorted colors.
Theratray (Models 31100 & 31105)
The Theratray, Models 31100 and 31105, are lapboards designed for use by people who use wheelchairs. The trays are fabricated of polyurethane foam to eliminate sharp edges, and strengthened by a 0.25-inch Aspernite wood insert. Both models include a fully molded rim and straps. DIMENSIONS: The Adult model (no. 31100) is 23.5 x 22 inches, with a 15 x 9 inches torso cutout. The oblong juvenile size (no. 31105) is 26.5 x 24 inches, with a 10.5 x 6 inches torso cutout. WARRANTY: The manufacturer war
Thigh Cuffs & Solid Seat Mount (Model 108-1000) And Lateral Hip/thigh Support Mount (Model 108-2000)
Padded thigh straps mount to solid seat of wheelchair. Sizes: small 7 to 10 inches circumference, medium 10 to 13 inches circumference, large 13 to 17 inches circumference, extra large specify circumference.
This Is A "hold-Up"!
This is a "Hold-Up"! is a torso support designed for use by individuals who lack trunk control. This one-piece butterfly-shaped support is made of nylon-covered closed-cell foam and features extended shoulder straps and elastic for comfort. It is compatible with most wheelchair seating systems and may be adapted for use with wheelchairs, high chairs, strollers, suppine standers, and more. The heavy-duty nylon covering is hand-washable OPTIONS: Custom adaptations and a gastric tube opening. SIZES
Thomashilfen Easys Stroller
The Thomashilfen EASyS Stroller is a child's stroller with a positioning seating system designed for use by children with neurological, mobility or severe physical disabilities. The stroller consists of a lightweight folding A-Chassis frame and the EASyS modular seating system. This stroller includes the Balance Safety System (BSS) to reduces the risk of the stroller tipping over by automatically sliding the seat forward when reclining the backrest, which shifts the center of gravity to a more s
Thriftytray (Models 31128, 31129, 31255, 31256)
Thriftytrays are lapboards designed for attaching to wheelchairs. These hardboard trays have rectangular work surfaces and are available in four models: Model 31129 is an adult tray with straps; Model 31128 is an adult tray with foam pads and straps; Model 31255 is the extra-wide tray with straps; Model 31256 is the extra-wide tray with foam pads and straps. DIMENSIONS (WxD): The adult trays are 23.5 x 22 inches with a 15 x 9 inch torso cutout; X-wide trays are 25.5 x 22 inches with a 15 x 9 inc
Tilt-A-Tray Adjustable Wheelchair Tray (Models H70670-0000 & H70670-0001)
The Tilt-A-Tray Adjustable Wheelchair Tray is a swing away lapboard designed to adjust vertically and tilt forward and back. The tray is attached to the wheelchair frame and swings away for access to the chair seat. The tray is made of clear polycarbonate and has front and rear edge bars. The right side is mounted to a hinged bar and the left side is held by suction cups mounted to adjustable bars. Fittings are molded of high-strength ABS plastic. Extension rods and braces are made of stainless
Tms Padded Chair Belt
Belt for wheelchair, webbing straps for attachement to chair, Wide padded canvas body strap, two rows of velcro for closure.
Tms Padded Chair Belt
Padded belt support. Two 12 inch long canvas pads with webbing strap sewn at one end. Straps attach under wheelchair upholstery screws and canvas pads fit across abdomen. Velcro closure.
Tms Slat Back (Models 2210, 2010, 2208, & 2208)
Alternative to solid back insert or soft back cushion. Slatted, padded back inserts provide stabilty without the rigidity of a solid back insert. Can also be used as a back extension providing 2 to 4 inches over the standard upholstery. A non-skid extension lays flat on the wheelchair seat, or under a seat cushion to prevent the back cushion from shifting. Standard adult (2210) 22 inches high, 10 slats wide. Standard adult (2210) 20 inches high, 10 slats wide. Narrow adult ( 2208) 22 inches hgih
Tms Solids, Solid Insert Seats And Backs
Solid seat and back inserts. Plywood base with padded foam and vinyl cover. Available in standard adult, narrow adult. Fits over regular seat and back. Back secured over push handles with fabric loops.
Toe Loop (Model 82)
The Toe Loop, model 82, is a toe strap designed to prevent the user's foot from slipping forward off the wheelchair footplate. The strap is equipped with buckles for adjustment and are attached to the front of the footplate.
Top Drop Clamp Attaching System (Model 31070)
The Top Drop Clamp Attaching System, model 31070, is lapboard mounting hardware designed to secure trays to wheelchairs. This system enables the tray (not included) to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. Made of glass-filled nylon, the clamps adjust to fit arms of different widths and pads of d
Top Mount Multiple Adjustment Headrest Bracket And Pads
Three custom size pads mounted on angled Kydex or aluminum bracket which attaches to shoulder height solid back. Mounting knob in solid back secures headrest, allowing it to be removed. Hardware allows height, tilt, and forward and back adjustment. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. May be ordered as unit, or bracket or pads may be ordered separately. Components: $50.00 to 40.00 brackets, $134.00 headwing bracket and pads.
Torso Support
The Torso Support is designed to prevent unwanted forward or lateral movement and to maintain mid-line positioning for individuals with severe physical or balance disabilities while seated. This support strap is available in double loop fabric or nylon webbing in models for use with rigid-back or solid back wheelchairs with a non-folding seat, folding wheelchairs, reclining whelchairs, one-person bench seats with non-divided back, or a two-person bench seat with a non-divided back. A multi-adjus
Transparent Trays
Transparent Trays are lapboards made of a see through polycarbonate plastic. The trays enable open visual field for safer wheelchair mobility. Several models are available: an adult model with an anodized aluminum rim (no. 8696, $67) and an adult model without a rim (no. 8242, $72.33) with Velcro straps, and a pediatric model (no. 8306, $105.45) with Velcro straps. DIMENSIONS: Adult size models are 23.5 x 22 inches; pediatric size is 20.5 x 18 inches; all models are .25 inches thick.
TravelChair
The TravelChair is a seating system designed for use by children 3-11 years of age who require additional postural support as a result of neurological involvement, cerebral palsy or developmental delay while flying on commercial aircraft.
Travelin' Toddler's Car Cushion
The Travelin' Toddler's Car Cushion is a head support, polybag cushion designed to offer support and comfort while sleeping for children when traveling. WARRANTY: If merchandise is received in damaged condition, a claim must be reported within five days from date of receipt of shipment.
Tray Attachment
This Tray Attachment is a wheelchair lapboard, to be used in conjunction with the "Bowling Ball Holder Ring". This attachment converts the Bowling Ball Holder Ring into a tray which may be used for dining, letter writing, as a class desk, etc. The tray is made of a waterproof material.
Tray Bracket (Model Tr30 & Tr31) And Tray Bracket Receptacle (Tr32)
The Tray Bracket ($50, model TR30 & TR31 for left and right armrests, respectively) and the Tray Bracket Receptacle ($70, TR32) are designed to attach a tray to the armrest of a wheelchair or seating system. The units are compatible with many armrests. The bracket is mounted on one armrest and the receptacle is mounted on one side of tray. Support on both sides is recommended for heavy duty applications.
Tray Clamps (Model 31086)
Tray Clamps, Model 31086, are lapboard mounting hardware designed to mount trays and lapboards to wheelchairs. These clamps provide a means of locking trays to wheelchair frames using one lever motion. WARRANTY: The manufacturer warrants this product to be free of defects in materials and workmanship for 90 days from the date of purchase.
Tray For Wheelchair
CUSTOM ADAPTATION PURPOSE: To enable individuals with mobility disabilities to shop and carry items. Designed for use on a variety of wheelchairs, the tray was fashioned of PVC with a lip at the front made of aluminum angle to prevent items from falling off. The tray attaches to the wheelchair with Velcro for attachment and removal. TITLE: In the Basket. JOURNAL: TAD Journal. REF: Vol. 21 no. 2, Winter 2001: p. 17. PAGES (including cover): 2 2001.
Tray Stay Clamping System (Model 31085)
The Tray Stay Clamping System is lapboard mounting hardware designed to attach trays and lapboards to wheelchairs. The modular clamping system allows the user to adjust the height and position of the tray by attaching the base channel system to the tray and inserting the appropriate spacers. The clamps are secured by an attachment knob. The system can be used to mount trays directly to the wheelchair armrest and crossbar, the armrest pad, or to the manufacturer's Extenda-Arms, which provides ad
Traymate
Plastic tray that fits on arm of wheelchair or upholstered chair. Perpendicular leg rests against inside of chair arm, adjustable spring loaded leg locks tray in place on outside of chair arm. Cut out for cups. 9 by 13 inch surface. Folds for storage. Washable. Fits also on hospital beds.
Trays & Hardware
The Tray and Hardware are a lapboard and mounting hardware designed for wheelchairs. The polycarbonate tray may be ordered with or without flip locks. Requires cutting out for trunk, sanding edges, and mounting of flip locks. OPTIONS: Tray elbow protection pads also available as individual or full pad. Mounting hardware may be ordered separately. DIMENSIONS: 18 x 24 inches (Small) and 24 x 27 inches (Large).
Tricycle Back Support
---- CUSTOMIZED ADAPTATION --------- PURPOSE: To provide a custom adaptation for a child with difficulties in supporting herself in the standing or sitting position; which allows her to ride her tricycle while providing firm support to hold her upright and her feet in place. The back support is built from 1/16 inch by 1 ½ inch metal strapping welded to the vertical tube just under the sat and shaped to provide a vertical “post” just behind her back. The vertical portion is in two parts with a se
Trimline Comfortline Armrest Series
The Trimline Comfortline Armrest Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. These wooden armrests are foam-padded and covered in satin finish vinyl. The armrests are available in fixed and flip-away styles for both right and left wheelchair arms and feature a molded cup holder recess. DIMENSIONS: .5 x 10.5 inches wide at the widest point, tapering to 6 inches x 22 inches. The foam padding is 1 inch thick. COLOR: Bl
Trimline Viewline Plus Armrest Series
The Trimline Viewline Plus Series are add-on armrests and lapboards designed to provide a small writing or work surface for people who use wheelchairs. Fabricated of transparent, unbreakable, scratch- resistant polycarbonate, the armrests are available in fixed or flip-away styles for both right and left wheelchair arms in tray only and tray with PVC plastic rim models. DIMENSIONS: 3/8 x 22 x 10.5 inches wide at the widest point, tapering to 6 inches. COLOR: The PVC plastic rims are black. WARRA
Trimline Woodline Light Reversible Armrest
The Trimline Woodline Light Reversible Armrest is an add-on armrest and lapboard designed to provide a small writing or work surface for people who use wheelchairs. The 7-ply Finnish birch plywood armrest has a clear lacquer finish and is designed to be assembled by the user in a right or left configuration. The necessary mounting hardware is included with the fixed model, Number 31302, and the flip-away model, Number 31309. DIMENSIONS: Both models are 3/8 inch thick x 22 inches deep x 10.5 inc
Trunk Pad
Lateral trunk support pads. Naugahyde covered foam. T nuts with 1 or 2 inch spacing for mounting to brackets. Curved rectangular, or pear- shaped pad. 3 to 6 inches high by 4 to 7 inches deep.
Trunk Pad (Models 1350, 1351-01, -21, -31,-32, -33, 1360, 1361-01, -21, -31, -32, -33, 1370, 1371-01, -21, -31, -32, & -33)
The Trunk Pad is a torso support designed for use by individuals with severe physical disabilities or spinal cord injury while seated in a wheelchair. Curved to fit body contours, it can adapt to many positioning applications. The Trunk Pad is made of 16 gauge steel, zinc-plated, and formed with recesses for ##10-32 press nuts to attach it to the back of a wheelchair. The recessed area is placed, vertically, in the middle of the pad. The Trunk Pad is padded and is available covered with a variet
Trunk Stabilizer.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Trunk stabilizer for positioning person with cerebral palsy in wheelchair. Cloth vest is fabricated with a channel sewn into each side. Dental dam, a soft elastic material, is folded to a width of 4 cm and cut in lengths of 200 cm. The dental dam material is threaded through the channels of the vest with the bottom straps are passed around the chest and tied in back of the wheelchair. The top strap ends pass over the shoulders, down the back between th
Trunk Supports And Brackets
Custom size trunk pads mount to solid back with T-nuts and bolts, or clamp to wheelchair uprights. Pads are 1/2 inch thick medium density foam over 1/2 inch birch plywood. Brackets are Kydex ($206) or aluminum ($195) and are bent to custom angles. Back-mounting brackets are slotted to allow adjustment of width, and adjust in height by relocating. May be ordered complete, or brackets and pads may be ordered separately.
Tube Arm Bracket Attaching System (Models 31902 & 31907)
The Tube Arm Bracket Attaching System is lapboard mounting hardware designed to secure trays to wheelchairs. These brackets enable a tray (not included) to slide on to tube-style armrests from the front. The brackets are attaached at both ends of the tube, enabling the tray to be attached to the top of the armrests (mounting hardware is not included). hook-and-loop straps (not included) may be used with these brackets for extra stability. OPTIONS: Mounting hardware (no. 31096H).SIZES: Small (no.
Tumble Forms 2 Conform Seat and Back Foam Cushion (Model 4327)
The Tumble Forms 2 Conform Seat and Back Foam Cushion, model 4327, is a contoured seat and back cushion designed to provide extra support for wheelchair users. The durable urethane foam cushion conforms to the natural body shape, and features a strap to prevent slipping. It is latex-free, and has a removable, washable polyester cover.
Tumble Forms Abductor Wedge (Model Pc 4768B)
The Tumble Forms Abductor Wedge, model PC 4768B, is a knee separator with Velcro strips that can be attached to Tumble Forms Wedges or Tumble Forms Deluxe Strap Wedges (see separate entry). DIMENSIONS: 5 inches high. COLOR: Red or teal.
Tumble Forms Carrie Collar (Model 2774C)
The Tumble Forms Carrie Collar, model 2774C, is a head and neck support designed to support the jawline and occipital region to help improve head control, neck flexion, and midline positioning for children who have physical disabilities. The collar may be used alone or with other seating systems. The horseshoe-shaped collar slips over the head, extends to the chest, and fastens in the front with a quick-release hook-and-loop fastener. The collar features the Tumble Forms waterproof coating.
Tumble Forms Carrie Seat (Models 4641L, 4641M, 4641S, & 4641Sa)
The Tumble Forms Carrie Seat, models 4641L, 4641M, 4641S & 4641SA, are positioning seating systems designed for insertion in mobility systems such as strollers, wheelchairs, or in vehicles. They may also be used at home or in school. The seats come with an adjustable footrest, headrest, and tray. Standard features include an anti-thrust seat to stabilize the pelvis; a seat back which articulates 20 degrees to accommodate abnormal trunk tone; an adjustable footrest to maintain hip, knee, and
Tumble Forms Extra Large Deluxe Floor Sitter
Tumble Forms Floor Sitters feature integral abductor, hip positioning strap and quick release H-belt. The exclusive Tumble Forms coating makes them easy to wash and maintain. Tumble Forms seamless covering is washable, odor and stain resistant, impervious to urine, and nontoxic. The Feeder Seat's contoured interior has a 90 degree seat-to-back relationship to encourage correct seating posture. Shoulder harness slots allow 4 inches of vertical adjustment of the shoulder straps.
Tush-Cush & Car-Cush
The Tush-Cush is a foam seat cushion designed for individuals at risk for pressure sores, who sit for long periods, or who have back pain. Made of resilient polyurethane foam, the cushion has a cut out to reduce pressure on the coccyx, a built-in carrying handle, and a removalble washable cover. The Car-Cush is a smaller version of the Tush-Cush and offers the same features. The Tush-Cush is available with a choice of a velour cover, a coated vinyl generaltional fabric cover, or a faux leather c
U Form Deep Contour Back
The U Form Deep Contour Back is a foam back support cushion for use on wheelchairs. The segmented foam structure is available in multiple configurations allowing the back cushion to be built to meet the user's requirements. Sections can be removed, exchanged with other foam densities or removed to accommodate specific positioning needs. The segmented foam structure is formed with an additional 0.75-inch topper for added comfort and transition between the outer cover and the firmer inner foam seg
Unilateral Facial Component (Models Ufc-1,-2,-3 & -4)
The Unilateral Facial Component, models UFC-1, UFC-2, UFC-3 and UFC-4, is a support designed for holding one side of the face or head for individuals who have difficulty holding their head in a mid-line position. It is similar to the Lateral Facial Component but is recommende for providing additional support to the individual with mild ANTR. The single adjustable pad can be positioned for greatest support and then locked securely into place using ball and socket brackets. It comes in four differ
Universal Arm Mount (Model 347-Ua503)
The Universal Arm Mount, model 347-UA503, is a mounting clamp for wheelchair accessories designed specifically for attachment of the MYDESC EZ-Removable Arm (see separate entry). This metal clamp block can be used with wheelchair tubing from 0.75 to 1.25 inches in diameter, and provides a 0.78 inch cylinder slot for mounting the EZ-Removable Arm directly to the wheelchair frame. The clamp may be mounted either horizontally or vertically.
Universal Bracket System
The Universal Bracket System is a set of brackets designed for mouting trays and lapboards on wheelchairs. These lightweight brackets are height- and width-adjustable to fit any wheelchair with standard arms. The rust- and corrosion-resistant brackets are removable for transfers and emergencies and they feature safety stops to prevent the tray from being pushed into the user.
Universal Headrest Mounting Plate (Model 7730)
The Universal Headrest Mounting Plate is seating hardware designed for use with wheelchair headrests. This plate enables a variety of headrests from various manufacturers to be interchanged as needed. The headrests may be changed without having to redo the T-nuts in the back.
Unreal Lambskin Wheelchair Accessories
Unreal Lambskin Wheelchair Accessories are decubitus pads for various pressure points including the seat, back, arm and footplates. These covers are made of synthetic fleece for pressure relief and prevention of decubitus ulcers. The material consists of 3/4-inch pile and is stain resistant, nonflammable, nonallergenic, nontoxic, machine washable and dryable, and resists packing down. Foot plate, arm and removable desk arm pads are sold in pairs. BACK COVER: Fits all standard adult wheelchair mo
Upper Trunk Support System & Solid Back Mount (Model 106-3000)
Upper trunk restraint, shoulder retraction straps mounted at bottom to adjustable chest strap. 1 inch neoprene padded sleeve, quick release side buckles. Mounts to solid back. Sizes: small for 9 to 14 inches sitting height, medium for 14 to 20 inches sitting height, large for 20 to 28 inches sitting height.
Vac U Mat
Vac-U-Mat is a molded cushion that can be used in bed or in a wheelchair. The mat is vinyl laminated to 70 denier nylon, with a vinyl coated polyester scrim bottom. Filled with polystyrene beads. when vacuum is applied the beads become rigid but conform to the body position for total support. Can be used with optional waist, shoulder harness and leg restraints.
Valueview Tray (Model 3115)
The Valueview Tray, model 3115, is a lap tray designed for use with wheelchairs. Made of transparent, unbreakable polycarbonate, this tray features an aluminum rim and hook-and-loop attachment straps. DIMENSIONS (WxD): 23.5 x 19 inches. The straps are one inch wide. The tray is 0.25-inch thick. WARRANTY: This product is warranted against defects in workmanship and materials for 90 days from the date of purchase.
Varilite Backrest & Varilite Split Backrest
The Varilite BackRest and Split BackRest are inflatable back support cushions designed for use by individuals with mobility disabilities, spinal cord injury, and others who need back support. The cushions offer lower lumbar support and promote spinal extension during wheelchair use, extended car rides, air travel, and in office chairs. Support encourages upright sitting posture and decrease muscle fatigue. Cushions have a mesh cover with reticulated foam that wicks moisture away from the skin. A
Varilite Cheat Sheets
Varilite Cheat Sheets are sheets of foam material designed for customized wheelchair seating for use by individuals with balance disabilities, lower extremity disabilities, mobility disabilities, and spinal cord injury. The Sheets are made of closed-cell foam with adhesive backing, and can be used for for building contours, changing pressure loading patterns, and improving the overall fit and function of a seating system. Sheets bond instantly and may be cut to exact size using only scissors or
Varilite Drop Base System
The Varilite Drop Base System is a wheelchair cushion drop base designed for use by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This system lowers the wheelchair seat base for individuals who need to be lower to the ground to self-propel or who have difficulty transferring to a higher surface. The system includes a base constructed from durable PVC plastic and L-J brackets made of hardened steel. The brackets allow up to four inches of height ad
Varilite Solid Insert
The Varilite Solid Insert is a solid seat insert designed for use in wheelchairs by individuals with lower extremity disabilities, mobility disabilities, and spinal cord injury. This insert is placed between the cushion and upholstery or directly inside the cushion cover to eliminate the effects of sling upholstery. Inserts are available to accommodate pediatric as well as adult users. They are made from durable plywood with rounded edges and sanded surfaces to reduce chance of splintering or pu
Velcro Closure Armrest Mount For Lapboard (Model 08-1000)
Lapboard with velcro closure, mounts on armrest. 1/4 inch clear acrylic. Sizes: 26 by 24 inches with 15 by 19 inch body cutout, 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/ 2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Modifications and accessories: 3/8 inch acrylic, colored acrylic, 1/4 inch lexan, 1/4 inch ABS, special cutouts, special widths and depths, aluminum rim, plastic rim, communication overlay.
Velcro Closure Safety Strap For Wheelchairs (Model H70623)
The Velcro Closure Safety Strap for Wheelchairs, model H70623, is a wheelchair seatbelt made of Velcro closure with metal D-ring buckles. The belt is adjustable, washable, and can be sterilized. The strap can be positioned at various heights to insure user comfort and security. A short strap anchors to the wheelchair frame while the long strap adjusts in length. DIMENSIONS: 32 inches long x 2 inches wide.
Velcro Closures Armrest Mount, Birch Lapboard (Model 08-4000)
Lapboard of birchwood with waterproof seal and plastic rim. Armrest mounting, velcro fasteners. Sizes: 24 by 24 inches with 15 by 9 inch body cutout, 22 by 22 inches with 13 by 7 1/2 inch body cutout, 20 by 20 inches with 10 by 6 inch body cutout. Custom cutouts, widths and depths available.
Velcro Wheelchair Straps (Models 107, 109, & 700)
Velcro wheelchair straps. 4 inches wide, various lengths. Constructed with stainless steel cinch ring and metal grommet for chair attachment. Includes storage feature for when not in use.
Velfoam
Velfoam is foam strap padding that can be used as a splint or strap liner, protective padding, or cushioning media. Velfoam is breathable, hypo- allergenic, odor-free, and backed with knitted loop fabric. Velfoam attaches with Velcro hook tape or Velcoin hook self-stick fastener. This padding is washable and sterilizable. DIMENSIONS: 6 inches wide; sold in 5- yard box. COLOR: White.
Velfoam ##2
Velfoam ##2 is Velcro foam strap padding designed for persons with physical disabilities. The cushion-soft material can be used for pading, straps or body support. The polyfoam strip is faced on both sides with Velcro loop and is ready to use with hook material. The material is washable and sterilizable. DIMENSIONS (LxWxT): 5 yards x 2 inches x 0.25 inch.
Velfoam 2
Velfoam 2 is foam strap padding with hook and loop fasteners for padding, straps, or body support belts. The 1/4-inch thick polyfoam strip is faced on both sides with Velcro loop, ready to use with hook material. Velfoam is washable and sterilizable. DIMENSIONS: Sold in two widths: 2 or 6 inches; 5 yard boxes. COLOR: Beige.
Vertically Adjustable Solid Back Mount Head/neck Support (Model 107-1000) & Multi Adjust Head/neck Support (Model 107-2000)
Head and neck support component for adaptive positioning. 4 3/4 inch range of vertical adjustment, or Multi Adjust mounts with bracket to permit vertical, front to rear, tilt and rotational adjustment. 1/4 inch ABS plastic, with separate removable foam pad. Shape allows posterior support at the occiput and rotational control without ear irritation. Mounts on solid back. Sizes: small, medium, large and extra large. Options: custom sizes, hydrocephalus modification, off set mounting. Accessories:
Vest, H Style Vest, & Butterfly Style Vest
Vest has 4-inch velcro chest piece, 2-inch velcro shoulder straps, and D-rings or buckles for attaching to solid back and/or lateral trunk supports. H-style vest has 2-inch velcro hip strap, 2-inch velcro shoulder straps, 2-inch cross piece to keep straps from sliding off shoulders, and D-rings or buckles for attaching to solid back. Butterfly style vest had vinyl pad with medium density foam over a leather form with 2-inch velcro shoulder and hip straps and D-rings or buckles for attaching to s
Viewline E-Z Lock Quik-Fit Trays (Models 33000P, 33001P, 33002P, 33017P, 33000, 33001, 33002, & 33017)
The Viewline E-Z Lock Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature an E-Z Lock Clamping System that adjusts for standard or thick arm pads, enables the tray to slide on to the armrests from the front, and secures the tray with a simple locking motion. The moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 33000P, 33001P, 33002P, and 33017P have a black PVC rim. The other models do not have a rim. SIZES: Child (fits w
Viewline Plus Extended Wing Trays (Models 31226, 31224, 31227, & 3125)
The Viewline Plus Extended Wing Trays are lap trays designed for use with wheelchairs. These moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 31226 and 31227 have a black PVC rim. The other models do not have a rim. The extended wings are designed to fit around the back uprights of the chair and they accommodate growth. SIZES: Small and large. DIMENSIONS (WxD): The small models (nos. 31224 and 31226) are 19.5 x 23.5 inches with an 11.5-inch wide torso c
Viewline Plus Series
The Viewline Plus Series are lapboards designed for attaching to wheelchairs. These trays are fabricated of transparent, unbreakable, scratch-resistant polycarbonate, and are available in tray only, tray with rim, tray with straps, and tray with rim and straps models. The juvenile tray has an oblong work surface; all other trays are rectangular. OPTIONS: Tray rims are available in a choice of anodized aluminum or PVC plastic. SIZES: All models are available in child, juvenile, adult, and extra-w
Viewline Series
The Viewline Series are lapboards designed for use by people who use wheelchairs. Constructed of transparent polycarbonate, models include the tray only, tray with anodized aluminum rim, tray with straps, tray with rim and straps, and the tray with the Quad Care Attaching System (see separate entry). The juvenile tray has an oblong surface; all other trays are rectangular. SIZES: The tray with the Quad Care attaching system is available in an adult size only; all other models are available in ch
Viewline Top Drop Quik-Fit Trays (Models 33006P, 33008P, 33010P, 33013P, 33006, 33008, 33010, & 33013)
The Viewline Top Drop Quik-Fit Trays are lap trays designed for use with wheelchairs. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. The moisture-resistant Viewline Trays are made of transparent unbreakable polycarbonate. Models 33006
Viewline Top Drop Quik-Fit Trays With Control Cutouts (Models 33025, 33026, 33027, 33028, 33029, 3330, 33031, 33032, 33033, 33034, 33035 & 33036)
The Viewline Top Drop Quik-Fit Trays with Control Cutouts are lap trays designed for use with powered wheelchairs with joysticks and other controllers. These trays feature a Top Drop Clamping System that enables the tray to be positioned straignt down on the armrests and requires only 3/8-inch clearance under the armpad which enables the tray to be used when a joystick or other control is mounted next to the armpad. The tray locks on with the turn of a handle. These trays also feature a cutout i
Vosego
Vosego is designed for use by children who have limited control of upper and lower extremity strength and coordination as a result of neurological involvement associated with cerebral palsy, ataxia, and low muscle tone. The Vosego offers lateral supports, trunk, and lower limb straps for posture. It also includes adjustable seat height, footrest, backrest ,and seat angle adjustments.
Web Seat Frame
The Web Seat Frame is a detachable seat frame with elastic webbing that can be substituted for sling upholstery in a 16 or 18 inch wide wheelchair. The Frame is easily removed for folding the chair. It supports a variety of polyurethane integral skin foam cushions, which clip onto the frame and remove for cleaning.
Wheelchair Adaptive Hardware
Wheelchair Adaptive Hardware is seating hardware designed for attaching seating components to standard wheelcahir frames. Available hardware includes drop hooks, adjustable angle hooks, horseshoe clips, U-brackets, seat blocks and locks, strap hinges, adjustable headrest support brackets, and lateral trunk support brackets and pads. WARRANTY: The manufacturer warrants these products against defects in materials and workmanship for 90 days from the date of purchase.
Wheelchair Back Support
The Wheelchair Back Support is a lumbar back support cushion designed to provide firm back support for wheelchair users. Covered in stain-resistant velour, the half-moon-shaped support is formed of quick-recovery foam and attaches to the wheelchair using loop handles. DIMENSIONS (LxWxD): 16 x 8 x 3 inches.
Wheelchair Computer Tray
DO-IT-YOURSELF ENTRY --- PURPOSE: To create a computer work table for a wheelchair. The table surface is made of plywood and positions a laptop computer directly in front of the user. The table is angle-adjustable and pivots out of the way or can be removed for transfers or when not in use. The table is supported by a pole and support made of threaded pipe. MATERIALS: Plywood and threaded pipe. TOOLS: Shop tools. SKILLS REQUIRED: Basic shop skills. TITLE: Doing It Yourself. JOURNAL: Quest. REF:
Wheelchair Convex Back Support
The Wheelchair Convex Back Support is a curved back insert designed for use in wheelchairs with sling upholstery. This support compansates for the tendency of sling upholstery to gap and improves support and pressure distribution by molding to the user's back. Made of high-density foam with softer foam on the front surface, this support featires a built-in lumbar roll and ties to the wheelchair back uprights. DIMENSIONS: 16 x 16 inches.
Wheelchair Leveling Pad (Models 757010 & 757015)
The Wheelchair Leveling Pad is a solid seat insert designed for use in wheelchairs. This solid, closed-cell foam pad makes wheelchair sling seats flat and level with the seat frame. This pad can be used as a foundation for other cushions. Model 757010 does not have a cover and model 757015 includes a vinyl cover. DIMENSIONS: Both models are 16 x 18 inches.
Wheelchair Lumbar Support(Models 703065 & 703066)
The Wheelchair Lumbar Support is a lumbar support designed for use in wheelchairs. The foam core is covered in easy-clean vinyl. The attached straps hold the support securely in place. Model 703065 is a half-round and model 703066 is a full-round. SIZES: One size fits 16- and 18-inch chairs. DIMENSIONS: The half-round is 2.5 inches in diameter and the full-round is 5 inches in diameter.
Wheelchair Positioner Cushion
The Wheelchair Positioner Cushion is a torso support designed for use by individuals who use wheelchairs. This M-shaped cushion rests over th lap of the users and the notches fit around the wheelchair frame to keep the cushion in position. Designed for use in wheelchairs with standard arms, this cushion promotes upper body alignment, prevents forward leaning, and serves as an elbow rest and work surface. A removable, wipe-clean, water-repellant vinyl cover is included. DIMENSIONS: Available in a
Wheelchair Safety Belt
The Wheelchair Safety Belt is a wheelchair seatbelt designed to prevent falls from wheelchairs. The adjustable, heavy-duty Velcro belt crosses the lap and attaches to the wheelchair axle with reinforced grommeted nylon straps. SIZES: One size fits most.
Wheelchair Seatbelt (Models 6880 & 6886)
The Wheelchair Seatbelt is a belt restraint designed to keep individuals in wheelchairs from falling forward out of the chair. It can be permanently attached to the upholstery screws and has a Velcro closure. DIMENSIONS: Both models are 2 inches wide; Small (6880) is 32 to 42 inches long, Large (6886) is 42 to 52 inches long.
Wheelchair Side Support
The Wheelchair Side Support is a lateral trunk support designed for use with individuals with balance disabilitieis. Made of closed-cell foam, the support can be modified with an electric knife and can be used on the right or left side individually or on both sides. OPTIONS: Short or long torso support inserts. DIMENSIONS: The optional short torso support is 6 inches long and the optional long torso support is 9 inches long.
Wheelchair Side Support (Models Ali1240 & Ali1241)
Wheelchair Side Support provides lateral torso support for wheelchair users with cerebral palsy, neurological disabilities, or upper extremity disabilities. These vinyl-covered foam bolsters reduce a standard 18-inch wide seat to 16 inches wide, thereby improving lateral support and reducing side-to-side rocking that can cause skin damage. Bolsters are available for high-back wheelchairs (model ALI1241) or for standard and desk-length arm wheelchairs (model ALI1240). DIMENSIONS (HxLxW): 1 x 15 x
Wheelchair Side Wings (Models 706320 & 706322)
The Snug Supports are lateral trunk supports designed for use by individuals who use wheelchairs and lean bilaterally. These rigid-frame wings are padded with foam and covered in wipe-clean vinyl and attach to most wheelchairs, providing support at the shoulder level. Model 706320 is the Standard Support model. Model 706322 is the X-tra Support model which features integral armrest pads which fasten the bottom of the wings to the wheelchair armrest frame to provide additional support for larger
Wheelchair Slippers (Models 6480S-M & 6480M-L
Wheelchair Slippers are foot protectors designed for use by individuals who use wheelchairs. Each of these soft plush, machine-washable slippers feature a strap on the bottom that slides over the wheelchair footplate, securing the slipper to the footplate, protecting the foot and providing a surface for the wearer to push against to stop forward sliding. SIZES: Model 6480S-M fits women's shoe sizes 5 to 10 and men's shoe sizes 5 to 8. Model 6480M-L fits women's shoe sizes 10 and up and men's sh
Wheelchair Snack Tray (Model 70621-0000)
The Wheelchair Snack Tray, model 70621-0000, is a lapboard designed to clamp to wheelchair tubing to hold snacks and beverages. The tray sticks to a platform by Velcro pads to facilitate removal for cleaning. The try is made of polystyrene; metal parts are epoxy coated. DIMENSIONS: 6.5 x 9.75 inches.
Wheelchair Table Attachment
This Wheelchair Table Attachment is a wheelchair lapboard with removeable desk arms. The table attaches to the wheelchair frame and front of the armrests with clamps. The tray is made of wood with a formica top and aluminum tubing. DIMENSIONS: 8 w x 24 l Specify width between arm rests when ordering.
Wheelchair Tray
The Wheelchair Tray is a lapboard designed for use by individuals who use wheelchairs. This plastic tray helps provide support for proper positioning while creating work and eating space. The tray features a torso cutout and raised edges prevent items from rolling. Velcro fasteners securely fasten the tray to the wheelchair. DIMENSIONS: 20 x 24 inches. WEIGHT: 1.1 pounds.
Wheelchair Tray
The Wheelchair Tray is a lapboard designed to enable the user to eat or do other activities from their wheelchair and to provide some protection from spills. The tray is made of plywood with two sides that rest on the seatpan of the wheelchair. A vinyl seal is fixed to the inside edge of the tray to protect the user from spills. PROTOTYPE DEVELOPMENT: Designed by John Duffus as a more comfortable and practical eating surface for wheelchair users at a standard height tabletop that is not high eno
Wheelchair Tray (Model 5061) & Wheelchair Tray Child Size (Model 2467)
Wheelchair tray with rim fits all size wheelchairs with full length or desk arms. Sides are tapered to permit chair propulsion with tray in position. Smooth plastic top. 24 by 19 inches with 15 by 6 inch cutout; child size 20 by 19 inches with 12 by 3 1/2 inch cutout.
Wheelchair Tray (Model 6025)
Formica lapboard, Velcro fasteners. Adult size, 24 by 20 inches by 1 inch.
Wheelchair Tray (Model 91)
The Wheelchair Tray, Model 91, is a solid lapboard that fits on the armrests of a wheelchair. The tray has a stain-resistant liminated finish ans Velcro attachment straps.
Wheelchair Tray (Model H70601-0015)
The Wheelchair Tray, model H70601-0015, is a formica lapboard designed to be attached to either side of a wheelchair with Velcro fastening straps. This rigid tray has a non-glare surface, a cutout, and a channel around its perimeter to catch spills. The edges are protected by smooth plastic molding. DIMENSIONS: Tray is 24 x 19 inches. WEIGHT: Shipping weight is 8.3 pounds.
Wheelchair Tray.
--- "DO IT YOURSELF" ENTRY ------- PURPOSE: Provides an attached table surface for a person in a wheelchair; can be used for activities or for arm support. Materials, diagrams and directions for making three types of wooden wheelchair laptrays. A standard tray with Velcro straps for attachment to wheelchair arms; a variation which folds in half; and a lowered tray useful for activities like cooking. SKILLS REQUIRED: Woodworking. AUTHOR: Gavee, B. TITLE: Wheelchair and Accessories REF: Book: Acce
Wheelchair Trays
The Wheelchair Trays are lap trays designed for use by children and adults who use wheelchairs. Made of shatterproof clear polycarbonate, the trays include adjustable mounting hardware. OPTIONS: Engraving of names and addresses, custom cutouts, slantboards, and more. DIMENSIONS: All models are made of 3/8-inch thick polycarbonate. Standard models are available for 10- to 12-inch wheelchairs, 13- to 14-inch chairs, 15- to 17-inch chairs, and 18- to 20-inch chairs. Custom dimensions are also avail
Wheelchair Trays (Models 4040, 4042, 4044, 4080, & 4090)
The Wheelchair Tray, models 4040, 4042, 4044, 4080, 4090, is a lapboard designed to be used by individuals in wheelchairs who need a hard, flat surface for eating, writing, etc. The trays have raised T-molding on the outside edges for extra security and have a half-moon cutout facing the individual. The universal design fits all standard wheelchairs and attaches with Velcro fasteners. SIZES: Adult 20 x 24 x 1/2 1 inch. Child 20 x 18 x 1/2 inch.
Wheelchair Trays And Modifications
Lapboards. Available in 1/2 inch 9 ply birch plywood, or 3/8 or 1/4 inch Tuffak (polycarbonate material), with regular or heavy duty cottonwood ribs. Range of widths, 20 7/8 to 25 3/4 inches; depths 17 7/ 8 to 25 3/4 inches; Cam adjustment range 13 3/4 - 18 1/4 inches to 18 1/ 4 - 23 1/4 inches. Small fits STC 803/900 Models and Tiny Tot and Growing wheelchairs; Medium fits STC 804/806/900 Models and Growing, Narrow Adult and Adult wheelchairs; Large fits STC 804/806/900 Models and Adult wheelch
Wheelchair Waist Belt With Buckle
The Wheelchair Waist Belt With Buckle, model MDT825120, is a wheelchair seatbelt designed for use by individuals with mobility disabilities or spinal cord injury. Made of washable nylon, this latex-free belt circles the waist, passes through a slide buckle, and ties in back. The slide buckle allows for individual fit and prevents overtightening. SIZES: One size fits all.
Wheelchair Wing Backs (Model 6321)
Wheelchair Wing Backs, model 6321, are lateral trunk supports designed to provide bilateral torso support for people who use wheelchairs. Constructed of plywood and padded in foam and covered in wipe-clean vinyl, these wings attach to the screws on the wheelchair back to provide support without taking up seating space. The angle may be adjusted to accommodate user needs. DIMENSIONS (WxL): 8 x 10 inches.
Wheelchair Y Safety Belt (Model 6038)
The Wheelchair Y Safety Belt is a belt restraint or wheelchair seatbelt. The "Y" shape is designed to prevent slumping and sliding of individuals in wheelchairs. The belt is completely adjustable and made of nylon webbing. SIZES: One size fits all.
Wheelnest Seating System
The WheelNest Seating System is a portable system for prolonged, balanced seating in wheelchairs, cars, office or other chairs that has a molded seat, solid seat and solid back inserts, and gel flotation seat cushion. WheelNest provides a balanced underseating as well as lumbar back support; helps maintain proper lordosis (curvature of the spine), correct hip position and proper spine alignment; and helps prevent decubitus ulcers. BACK SUPPORT: The back support is made of padded, contoured layer
Whit Kit (Model A0001)
The Whit Kit, model A0001, is a large selection of head supports allowing the clinician to evaluate what head support system works best for the client. It includes head support pads and hardware which let the clinician create custom solutions by mixing and matching components. They come packed in a hard shell plastic case for transporting. Also included is the Quik Mount hardware bracket (see separate entry) for fast and simple assembly and adjustment on any wheelchair. Whit Kit comes complete w
Wing Back Support
The Wing Back Support is a back support cushion designed for use by individuals with back pain, weakness, or injury. This support can be used in standard chairs, office chairs, or on car seats and provides lateral support for correct posture as well as lower back support. This cushion is available in polyurethane foam, six-pound VitalFoam Memory foam, or Memory Lite foam, and all models include an adjustable strap to secure the cushion to a car seat. DIMENSIONS: The polyurethane foam model is 1
Winnipeg Modular Seating System
Modular seating system. ABS plastic seat and back modules can be attached together to form a simple wheelchair insert or fitted to special interface hardware. Two back styles: standard with contouring at waist, and MD back with preformed lumbar support cushion. Two seat styles: pommel seat and transfer seat without pommel. Sizes range from 10 to 15 inches seat width by 12 to 19 inches seat depth by 19 to 23 inches back height. Additional components include headrest, lateral trunk support, tray,
Wood Tray With Vinyl Cover
The Wood Tray with Vinyl Cover is a wheelchair lap trays designed for use by individuals with lower extremity or mobility disabilities or spinal cord injury and others who use wheelchairs. The tray is made of birch wood with a wooden rim, and it has foam padding with a vinyl cover. The unit comes with mounting hardware, and it is available as a stationary or flip-up tray for the right or left side of the wheelchair. DIMENSIONS: 22 x 13 inches; wood is 0.38 inches thick; foam is 1 inch thick.
Woodline Light Trays (Series 31100)
The Woodline Light Trays are lap trays designed for use with wheelchairs. These seven-ply birch trays have limitied moisture resistance and can be attached using the E-Z Lock Clamp, Top Drop Clamp, Tube Arm Braxkets (not included), or other attaching system. Models include the tray only, tray with hook-and-loop attaching straps, tray with a three-piece wood rim, and tray with straps and rim. SIZES: Child (fits wheelchairs 12 to 14 inches wide), adult (fits chairs 14 to 17 inches wide), extra wid
Woodline Series
The Woodline Series are lapboards designed for use by people who use wheelchairs. The trays are constructed of 7-ply birch plywood with a lacquer finish. Models include the tray only, tray with 3-piece wood rim, tray with straps, and tray with straps and rim. The juvenile tray has an oblong design, while the other models are square. SIZE: All models are available in child, juvenile, adult, and X-wide sizes. DIMENSIONS (W x D): The adult tray is 23.5 x 22 inches, with a 15 x 9 inches torso cutout
Workmod Back Support (Model Nc73585)
The WorkMod Back Support, model NC73585, provides firm lower back support and encourages correct sitting position and posture, eliminating discomfort and fatigue. The cushion can be used on any type of chair and is designed to stay in place during use.
x:panda
X:Panda is a multi-adjustable dynamic seat, designed for children with limited postural control and mobility associated with cerebral palsy, traumatic brain injury or dystonia. The back is dynamic, making it possible for the child to extend and push back against relatively light resistance and then regain the desired sitting position. The back is lockable which could be preferred in feeding situations and required when being used in transportation. The back can also be angled to make it possibl
Yogaback Posture Cushion For Driving
The YogaBack Posture Cushion for Driving is a back support cushion designed for use by drivers with lower back pain. This polyethylene foam cushion features sacral and thoracic pads that attach with Velcro to the inside back surface of the cushion's fabric cover. The pads are infinitely height adjustable. The cushion has a slim profile so the user will not be pressed forward in the car seat. The cushion's depth is adjustable with a choice of two different pad thicknesses. The cushion comes with
Zippie
The Zippie is a child's lightweight manual wheelchair designed for use by children with mobility disabilities. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional.A growth kit is included to expand the fame to meet the user's needs. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths ran
Zippie Head And Neck Telescoping Support System
Three-piece headrest with center pad and two adjustable side pads. Standard pad sizes: center 4 inches wide by 6 inches high, side pads 4 inches wide by 2 inches high. Custom sizes available. Center pad has occipital shelf or can be ordered flat. Mounting hardware allows adjustment of side pad depth, angle, and width, and adjustment of entire headrest in height, forward/back, and angle. Attaches to solid back.
Zippie Hip Pads & Full Side Pads
Pads are foam padded plywood, covered with naugahyde. Full side pads are 4 inches by 9 inches or 4 inches by 11 inches. Deep curved pads in 3 sizes: 3 inches by 5 inches, 4 inches by 6 inches, 6 inches by 10 inches. Mount to solid backs with angle brackets, or to seats with offset brackets or mounting rail brackets. Custom foam and pad sizes available. Full side pads available in 12 colors, curved pads in black only.
Zippie Iris
Zippie IRIS is designed for children 4 to 16 years of age who require the benefit of tilt and a caregiver’s assistance with mobility. The Zippie IRIS rotation-in-space wheelchair is a lightweight tilt-in space wheelchair. It offers 55 degrees of Rotation-in-Space Technology. The IRIS is able to grow as the child grows. Adjust the depth and center-of-gravity without replacing any parts. Additional special features include a 40 degree or 55 degree tilt range option to accommodate various posi
Zippie Trunk Support Pad And Bracket
Pads are foam padded plywood, covered with naugahyde. Oval shaped pads in 3 sizes: 4 inches by 5 inches, 4 inches by 6 inches, and 5 inches by 7 inches. Rectangular pads are 4 inches by 6 inches. Deep curved pads in 3 sizes: 3 inches by 4 inches, 4 inches by 4 inches, 6 inches by 6 inches. Mount to solid backs with offset brackets, angle brackets, or mounting rails. Fixed or removeable. Custom foam and pad sizes available. Oval and rectangular pads available in 12 colors, curved pads in black on
Zippie Ts
The Zippie TS is a child's lightweight manual tilt in space wheelchair. FRAME: The rigid frame is offered in a range of widths from 10 to 16 inches. Rear anti-tip tubes are standard; front anti-tips are optional. The frame is available in 11 standard colors and 3 custom colors. SEAT: The standard seat is available in a choice of widths ranging from 10 to 16 inches. Standard seat depths range from 10 to 16 inches. Custom depths are available at an extra charge. Seat height depends upon the wheel
Zippie Zone
Zippie Zone is designed for active children 4 to 16 years of age who are able to propel themselves independently. The Zippie Zone includes 3” of frame depth adjustment and 2” of seat sling depth adjustment. Adjusting the frame width has been designed to be simple. It requires the replacement of 4 tubes (seat, back, camber and footrest) to accommodate the child as he/she grows. Special features include a flared seat and inset backrest to fit small children and provide better access to the whe
Zoomi
The standard Zoomi is a youth positioning chair designed for use for children with mobility and neurological disabilities. Designed to promote good feet-on-the-floor posture, it can be used in the classroom and home. Both the seat and footrest can be easily adjusted to the appropriate height and depth, allowing the chair to accommodate the user's needs as they grow. Standard Zoomi chair comes complete with flat seat, backrest and pelvic strap. OPTIONS: Mobile skis, slotted footboard, transfer st
Zuma Rockers Chair
The ZUMA Rocker is a personal movement experience that allows a student the input needed to maintain attention while not being disruptive within a classroom setting. Innovative design allows a moderate range of motion. The one-piece blueberry plastic shell is contoured to fit the body. Sturdy, tubular steel rocking legs have bump stop glides for safety.